Too anyone who's already downloaded this, I'd like to formally apologize.
i didn't know that the Blohm and Voss P-209.2 existed (albeit on paper.) I still think the Floppy jet is a combination of that aircraft and the HE-178.
German wartime jet prototypes are clearly not my forte.
anyway, Here's a breakdown of the P209.2
It was a jet that matched the floppy jets layout almost perfectly with its forward intake, high mounted swept forward wings (Variable geometry proposal!) and single boom tail. it's only difference, and where the HE178's design comes to play, is the floppy jet's fixed tail dragger gear which comes from the HE178v1.
I'm embarrassed i screwed this one up so bad and the amount of effort i put into the build, only to build the wrong plane entirely.
I however am not a beta tester or developer and CAN!
Your answer is that a mod has been made for Simpleplanes and if you're on pc you can download it and use it! If you're on mobile, good luck and may the gods have mercy on your soul.
@AviationLover12345 Again, an A380 isn't gonna auto spawn. the criteria for a build to auto spawn is as follows.
-No more than 96 parts.
-no more than 7 wing surfaces.
-The Ai has to be able to fly it. it has a system in place to do so.
There's no way an A380 auto spawned as aggressive. Only one plane can do that and it's the tutorial plane with 5-blade props. Also any A380 is gonna be way over the part count budget for auto spawning.
Perhaps looking at the model in 3ds max, and making sure all the geometry is actually there. But other than that, this is a question for the 3d printing comunity. It could also be whatever printer you're using has a tendency to do this. I'd hit up redit pages for either 3d printing or the specific model of printer and see if you find your answer there.
The ATS-21 also would have run into the same problem that plagued the F-14A. It's thrust vectoring nozzles would have made it too maneuverable for It's own good, leading to compressor stalls in the engines and possibly structural failure.
I see ddl controlled traffic lights... but will the ai traffic obey them? Will the ai traffic be based on builds or just one piece models? I can't wait to find out!
@MrGibbs honestly I'm just trolling the new guy at this point.
He replied to a argument from 5 years ago. I don't know if he's just way to young to be browsing the interwebs or of he's living under a rock. Plus he did basically admit to searching for dicks on the site.
@MASSIKTHEPLANEMAKER is there a reason you're replying to a 5 year old comment? Also if it was a finger op would have made it look like one with straight edges and knuckles. Op did not.
I disagree. the gen 7 is easily just as controversial. But i digress this is your best looking one yet. I have renewed motivation to finish my F-150 and what i have planned for it.
You can build planes however you choose. It may come to fruition that a custom airfoil or multi layer fuselage might be the only way to get the perfect look you want. Me? Nah I'm using ALL the new gadgets and gizmoz.
Too anyone who's already downloaded this, I'd like to formally apologize.
i didn't know that the Blohm and Voss P-209.2 existed (albeit on paper.) I still think the Floppy jet is a combination of that aircraft and the HE-178.
German wartime jet prototypes are clearly not my forte.
anyway, Here's a breakdown of the P209.2
It was a jet that matched the floppy jets layout almost perfectly with its forward intake, high mounted swept forward wings (Variable geometry proposal!) and single boom tail. it's only difference, and where the HE178's design comes to play, is the floppy jet's fixed tail dragger gear which comes from the HE178v1.
I'm embarrassed i screwed this one up so bad and the amount of effort i put into the build, only to build the wrong plane entirely.
what map plug-ins are you running?
Excuse me sir, but WHAT is that piece the wheel is attached to? You have some explaining to do!
Pronounced Coke-coch-coke-cock
Nothing says "I'm building a car but can't make a detailed engine for it" quite like... we'll, this.
They're not allowed to answer this question.
I however am not a beta tester or developer and CAN!
Your answer is that a mod has been made for Simpleplanes and if you're on pc you can download it and use it! If you're on mobile, good luck and may the gods have mercy on your soul.
@Beiyanggovernment you were supposed to give the original builder credit
Ram and hard drive. That's all you need.
+1You can't undownload it!
...Noted.
Welcome to the club
But can I drop it from an A-1 Skyraider?
+3@Xuexxq wat
@xNotDumb I would so love to be able to play as Tonald Drump and Boe Jiden
Are we gonna get in house world building like Juno?
@AviationLover12345 Again, an A380 isn't gonna auto spawn. the criteria for a build to auto spawn is as follows.
-No more than 96 parts.
-no more than 7 wing surfaces.
-The Ai has to be able to fly it. it has a system in place to do so.
There's no way an A380 auto spawned as aggressive. Only one plane can do that and it's the tutorial plane with 5-blade props. Also any A380 is gonna be way over the part count budget for auto spawning.
+2Perhaps looking at the model in 3ds max, and making sure all the geometry is actually there. But other than that, this is a question for the 3d printing comunity. It could also be whatever printer you're using has a tendency to do this. I'd hit up redit pages for either 3d printing or the specific model of printer and see if you find your answer there.
+1All of them
@MASSIKTHEPLANEMAKER I'm not. Haven't said one cuss word.
What in the Skycrawlers hell is this!? i think it can be improved if we combine this airframe with the FT codes of the Pigpen!
+2OOOHHHHHHHJ SHIIIIIIIIII
The ATS-21 also would have run into the same problem that plagued the F-14A. It's thrust vectoring nozzles would have made it too maneuverable for It's own good, leading to compressor stalls in the engines and possibly structural failure.
I see ddl controlled traffic lights... but will the ai traffic obey them? Will the ai traffic be based on builds or just one piece models? I can't wait to find out!
@MrGibbs honestly I'm just trolling the new guy at this point.
He replied to a argument from 5 years ago. I don't know if he's just way to young to be browsing the interwebs or of he's living under a rock. Plus he did basically admit to searching for dicks on the site.
@MASSIKTHEPLANEMAKER is there a reason you're replying to a 5 year old comment? Also if it was a finger op would have made it look like one with straight edges and knuckles. Op did not.
That's par for the coarse
@PlaneFlightX Jesus
Is that a Rolls Royce Merlin?
@WNP78
@PapaKernels I'm talking about peace gate aka upside down gate
+1will there be a resolution limit to custom decals?
@Nitrolord probably gonna catch a penalty for this: Shitposting
I disagree. the gen 7 is easily just as controversial. But i digress this is your best looking one yet. I have renewed motivation to finish my F-150 and what i have planned for it.
+1The mods really do need to add another category to the report page.
+1Reported
Hey can we not talk about this? Some of us are American, Israeli, or Iranian. None of us are happy about what's going on.
I feel like the devs and mods are too fluid
+4How about we bring back the old stock planes, but remastered? Oh wait...
+1You can build planes however you choose. It may come to fruition that a custom airfoil or multi layer fuselage might be the only way to get the perfect look you want. Me? Nah I'm using ALL the new gadgets and gizmoz.
@WNP78 will your xml overload be implemented? Will we even be able to xml edit?
+2@LANYI actually it's pretty easy. But I thought it was supposed to be fixed gear.
Not a bad first plane! you can tell it's inspired by the GB racers. my only gripes are there's no rudder and the landing gear is exposed.
way better than i could ever build on android too.
+1You cheeky bastard!
+2@YarisHatchback no. it had no first gear so he always had to pop launch it.
Heeeyyyy my cousin had one of these when he was stationed in Italy!
+1The quest native app runs faster than linking your headset to a pc actually
Blueprints only ever worked for pc
@Randomplayer yes you can. And on quest 2
Good luck!