It looks great, but is a bit boring to drive. You should have allowed CoM to stay higher so we have to be at least a bit careful not to roll it over, and speed should have been limited to whatever the max speed of these was. You can do that by editing maxAngularVelocity property of wheels. That property shows up when you assign a wheel to an engine.
@Flash0of0green my folders never had any problem with some light chopping. They're chinese made cheap knives, though I redid blade geometry with some grinding and polishing. regardless, you need at least 85mm of handle (optimally at least 100) for a comfortable grip, and a blade for useable pocket knife doesn't need to be longer than 85mm. A knife with your mechanism would be a nice novelty, but it wouldn't surpass simpler designs in practicality.
@Brencool35 funky trees aren't necessary for building, but they can greatly enhance performance of a build. I suggest trying to master at least a few simple ones like clamp and adding up inputs. Also, get a friend who is very good with funky trees. I'm pretty bad at figuring out complex trees, so a friend often helps me out.
@Nonofyourbusiness you should be courteous to other users. If you detect a problem with a build, teach a user how to fix it instead of being toxic about it. Your comment has been removed.
Perhaps a better way to do it would be to make it sail and shoot before adding any details, then making all details and non-functioning structures (smoke stacks, bridge, ventilation shafts, masts...) with no mass and drag so they don't damage performance when added.
Since it is related to gore, I advise against it. Many user may recognise it, as it is, according to a website I checked with, an image often used to shock people with grosseness. I will also remove this post for the same reason, but will not issue you a strike.
The build looks nice, but you should definitely consider using a better looking airfoil. Roll rate is far lower than I'd expect from a fighter too. WHen you are using custom control surfaces, if the hinge axis of the control surface is angled (not 90° to the longitudinal axis), you also need to angle the rotator. Otherwise, it looks ugly when you move the control surface.
@Chancey21 it seems more suited for a transport/attack helicopter role than for space battles though. Like those shuttles they used to deploy clones in the old movies.
@JakeTheDogg you can see the winches by ghosting the base of the turret and a few large pieces of the rear superstructure with Fine Tuner, and magnet is on the barrel lock just behind the cabin.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Battleship is the kind of ship recognizable by very large guns in multiple turrets and great size, often over 200m. This is a littoral combat ship, what other navies call a corvette, fast attack craft, or patrol boat.
Your post has been removed because it appears to have broken the website rules. You can read them here
Edit: sorry, I forgot to read how old the build is. The rule about thumbnails is new and doesn't apply to builds posted before it. It has been "unremoved".
@X4JB depends. If they are NSFW, post will be removed, if the build isn't an anime girl but anime girl is shown instead of the build, it will be removed. Build must be clearly shown as it is, and background can be anything you want.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Shell follows simplified ballistic trajectory form its spawn point, which is at the start of the barrel. It doesn't keep straight to the tip of the barrel.
@Mustang51 thank you :)
+1You should have used structural wings and control surfaces on hinge rotators. It would have allowed you to have part of the roundel move with aileron.
+1@spefyjerbf of course you can. Dunno why they won't show though.
+1:)
+1It looks great, but is a bit boring to drive. You should have allowed CoM to stay higher so we have to be at least a bit careful not to roll it over, and speed should have been limited to whatever the max speed of these was. You can do that by editing
+1maxAngularVelocity
property of wheels. That property shows up when you assign a wheel to an engine.@X4JB sorry for the misunderstanding then :)
+1@P0TET0Z one more. This is your first, second is also free, third brings temp ban, fourth a longer temp ban, fifth usually seals your fate.
+1Congratulations, your logo is so close to the real thing that Google recognised it. You won a strike for NSFW material.
+1@Flash0of0green my folders never had any problem with some light chopping. They're chinese made cheap knives, though I redid blade geometry with some grinding and polishing. regardless, you need at least 85mm of handle (optimally at least 100) for a comfortable grip, and a blade for useable pocket knife doesn't need to be longer than 85mm. A knife with your mechanism would be a nice novelty, but it wouldn't surpass simpler designs in practicality.
+1@Hedero are there many planes designed and built in Switzerland? I'm aware of Pilatus, but are there any others?
+1@BuiltBionixInd10 I don't think removal of one would affect the other.
+1@TTHHSSSS sweet.
+1You need to make it a custom weapon.
+1@Brencool35 funky trees aren't necessary for building, but they can greatly enhance performance of a build. I suggest trying to master at least a few simple ones like clamp and adding up inputs. Also, get a friend who is very good with funky trees. I'm pretty bad at figuring out complex trees, so a friend often helps me out.
+1@Nonofyourbusiness you should be courteous to other users. If you detect a problem with a build, teach a user how to fix it instead of being toxic about it. Your comment has been removed.
+1Perhaps a better way to do it would be to make it sail and shoot before adding any details, then making all details and non-functioning structures (smoke stacks, bridge, ventilation shafts, masts...) with no mass and drag so they don't damage performance when added.
+1Since it is related to gore, I advise against it. Many user may recognise it, as it is, according to a website I checked with, an image often used to shock people with grosseness. I will also remove this post for the same reason, but will not issue you a strike.
+1You can use the cross of the Luftwaffe on it if you want. Looks very cute. I hope it'll fly equally well.
+1This must be the strangest accordion I've ever seen.
+1Joke aside, very nice build. Very fun to play with.
You should have tried a custom livery. Flat sides of Sherpa are ideal for that. Other than that, very nice build.
+1@sheepsblood you'd need to tag me on the post in question if you want me to investigate it. Other than that, I have no idea what you're talking about.
+1The build looks nice, but you should definitely consider using a better looking airfoil. Roll rate is far lower than I'd expect from a fighter too. WHen you are using custom control surfaces, if the hinge axis of the control surface is angled (not 90° to the longitudinal axis), you also need to angle the rotator. Otherwise, it looks ugly when you move the control surface.
+1It's called gimbal lock, apparently. Two axis match up. Multi-select the part or reset rotation as CrashFighter suggested.
+1@Armyguy1534 well, we all started from the bottom :)
+1@Chancey21 it seems more suited for a transport/attack helicopter role than for space battles though. Like those shuttles they used to deploy clones in the old movies.
+1@JakeTheDogg you can see the winches by ghosting the base of the turret and a few large pieces of the rear superstructure with Fine Tuner, and magnet is on the barrel lock just behind the cabin.
+1To post images, write
+1.
. Since you're using Imgur, remove "s" from "https".Looks nice, though nose seems a bit long for a radial.
+1Your post has been removed. Please read these rules about posting planes.
+1Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
+1Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
+1Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
@Gameboi14 part count would be the same actually. Maybe one or two parts more per segment if you want them to be smoother.
+1@TheWeaver you could visit SPMC sometime. I haven't seen you there in quite a while.
+1No problem. Very cute build. It would be better with custom control surfaces though.
+1@ACEPILOT109 SimplePlanes Masters group is a separate group almost as old as SP itself. Yes, we still exist.
+1@JamesBleriot why would there be a rule for that?
+1@JamesBleriot you can read the rules here. You're silver, so I'm stunned you haven't already.
+1Battleship is the kind of ship recognizable by very large guns in multiple turrets and great size, often over 200m. This is a littoral combat ship, what other navies call a corvette, fast attack craft, or patrol boat.
+1Your post has been removed because it appears to have broken the website rules. You can read them here
Edit: sorry, I forgot to read how old the build is. The rule about thumbnails is new and doesn't apply to builds posted before it. It has been "unremoved".
+1@X4JB depends. If they are NSFW, post will be removed, if the build isn't an anime girl but anime girl is shown instead of the build, it will be removed. Build must be clearly shown as it is, and background can be anything you want.
+1Your post has been removed. Please read these rules about posting planes.
+1Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Nice pistons. I prefer the option with springs though.
+1I suck at flying helicopters, so I'm not much of a judge of performance.
+1@XjayIndustrys no problem :)
+1When posting Imgur images, delete "s" from "https". Otherwise, only people currently logged into Imgur can see them. I fixed it for you here.
+1Shell follows simplified ballistic trajectory form its spawn point, which is at the start of the barrel. It doesn't keep straight to the tip of the barrel.
+1@Mumpsy I'm glad you like them. They're very easy to make, and you can use them without credit if you don't want to make your own.
+1@CRJ900Pilot this may help. It doesn't contain the new things from 1.9, but it does contain everything before that.
+1@grizzlitn thanks :)
+1