Was there a way to maximise tool use and speed while minimising tool ware the code on a Carbide insert with the designation V belt pullies measured from the first time I wound the areal down the road is closed beta for the game is not dying and I have to do the sections for all of the curves on your plane without protrusions of blocks into your interior was extremely difficult to get this job because it suites my interests and I think I'll really enjoy doing it
@rendyoho it won't since the plane generates less lift when its stalling. But if you want it to be more maneuverable, try increasing the wing area and reducing the mass if the plane
I can't see what you're trying to do here. Looks like the snap point above the B pillar is where it's supposed to be placed, plus you should easily be able to place it level with the other block by moving your camera, and on all the places the spike is snapping to, the connections will be favourable.
On the gif that I made where I'm trying to place a part of the wing, it was obvious where the part needed to go, and everywhere the part was going were places where it wouldn't attach and have favourable connections. Also in my gif the camera position should be optimal for placing the part in the slot, but it's going absolutely everywhere but the desired spot.
DC-10 had carg door latch issues, MD-11 has a tiny tail plane and high landing speeds.
DC-10 problem fixable (and has been fixed), MD-11 problem... not really.
Also the 727 is a tri-jet. Take another look
That looks sick!
ciggy here
+1How many millions of people are you gonna tag this time
Jesus christ
+2Was there a way to maximise tool use and speed while minimising tool ware the code on a Carbide insert with the designation V belt pullies measured from the first time I wound the areal down the road is closed beta for the game is not dying and I have to do the sections for all of the curves on your plane without protrusions of blocks into your interior was extremely difficult to get this job because it suites my interests and I think I'll really enjoy doing it
Wow this really sums up my life at the moment lol
UPS? More like DOWNS lmao
Was this made by spamming the auto fill on your keyboard?
+2What
+2@rendyoho Nice!
@rendyoho it won't since the plane generates less lift when its stalling. But if you want it to be more maneuverable, try increasing the wing area and reducing the mass if the plane
It's spinning because you are stalling one wing. Try reducing the deflection of your elevators using Overload or reduce their size.
@Graingy My real life job requires 0.002mm of precision
Guys why dose dis only jaeb 94 upvots 😭😭😭
+2Oh no guys he died!
+1@vonhubert Actually I think yeah you're right
Uhhh just put it either side and see what happens @Majakalona
@Majakalona what kind of chair do you have
Idk what your chair looks like
@Majakalona Should there be 2 washers?
put the screw through the washer
@vonhubert It's always been like that :/
@Thebestpiloteh
no way mine is in 3 days
How has this been up for an hour with 0 upvotes? This is herecy
Amazing build yo!
I can't see what you're trying to do here. Looks like the snap point above the B pillar is where it's supposed to be placed, plus you should easily be able to place it level with the other block by moving your camera, and on all the places the spike is snapping to, the connections will be favourable.
On the gif that I made where I'm trying to place a part of the wing, it was obvious where the part needed to go, and everywhere the part was going were places where it wouldn't attach and have favourable connections. Also in my gif the camera position should be optimal for placing the part in the slot, but it's going absolutely everywhere but the desired spot.
@PlaneFlightX But there's only .5mm nudge increment, which can kinda add up if you don't place the parts on things
DC-10 had carg door latch issues, MD-11 has a tiny tail plane and high landing speeds.
+1DC-10 problem fixable (and has been fixed), MD-11 problem... not really.
Also the 727 is a tri-jet. Take another look
Don't bother with an upload schedule. There's no algorithm here that will punish you for not uploading.
+5Mirror individual parts
+9It's on all platforms
Take as long break as you need. Nobody is making you play, and there's no algorithm or anything that will punish you for it
+5you could always just not delete it
+8looks like a michael ngl
Apparently the myth around dragons in europian culture came from asia with the silk road
+1@Rocketguy2079 Is this something else?
+1@XtarsAgency Did you upload it to an image sharing site and copy the link?
ute version when ?
The homepage only contains posts from the past 5 days. I'm pretty sure back 1.6 years ago I do remember your posts being on there @Wolf211
horny
+6 for pics
As a fellow citizen of the southern hemisphere, today was definitely longer than yesterday
+2Why can't people just follow you?
+1bingly
Hi back, I'm @Dad!
+3@Wolf211 Why's that? What happens?
can you make android version plz my mum grounded me from using the computer 🥺🥺🥺🥺🥺🥺🥺
+10@Wolf211 Why did you make a new account?
@Wolf211 Ohh I remember you lol nice
@Precipitation What's your main?
This thing flies awesome too! Bruh where have you come from? There's no way this is your first build lol
+2