@BogdanX
Absolute XYZ coordinates
TargetX = Longitude + TargetDistance * sin(TargetHeading)
TargetY = Altitude + TargetDistance * sin(TargetElevation)
TargetZ = Latitude + TargetDistance * cos(TargetHeading)
.
Speed uses rate function to get XYZ rate of change, then use the distance between two points formula
TargetSpeed = sqrt(pow(rate(TargetX),2) + pow(rate(TargetY),2) + pow(rate(TargetZ),2))
Use alpha tag with a timer ternary list like:
{timer<0.1?"FF":(timer<0.2?"E0":( ... ))}
Where timer is an animation timer that is zero at full opacity, for example:
smooth(activate ? timerMax : 0, 1)
@IAlsoBuildPlane zeroOnDeactivate works on the activation group of the input controller
If true, the input is forced to zero when activation is false
If false, the input does not change when activation is false
Personally, i don't use the activation input now that funky trees is a thing, so i don't use zeroOnDeactivate
@Kurizin this exception should not happen normally, there is probably a bug in your game install
The exception is also probably not related to funky trees, if the problem is UnityEngine.Touch
Try:
- reload the game
- restart your PC
- reinstall the game
@THEEND8238927373627 tl;dr moment
- download unity (specified version)
- download mod tools from pc game, otherwise nick it from actual jundroo link (may be old version)
- create unity project, check that version is correct, download correct one if it's not
- apply certain simpleplanes specific project settings (search online)
- use unity (watch jundroo tutorials for simpleplanes specific info)
- good luck lmao, remember that simpleplanes modding tutorials contain simpleplanes specific information that you can't make mods without
You need unity to make mods.
You can download models or export your own from blender to unity and use them in your mod. The only way to put custom 3d models in the game is with a mod.
You don't need coding for maps and designers. But you need it for parts and custom levels.
No maximum file size. But if the mod is under 20 MB, you can host it on simpleplanes.com
Add delay between cycles of trigonometric function cos(lerp(0, 360, inverselerp(0, TRIG_PERIOD, repeat(Time, TRIG_PERIOD+TRIG_PAUSE)))) TRIG_PERIOD: Time taken for the trigonometric function to animate from 0 to 360 degrees.
(In your case, 360deg / 500deg/s = 0.72s) TRIG_PAUSE: Pause duration between animations.
Hi mark,
You cannot put file directories as links as only you will be able to see the files. Upload images to an image hosting service and copy the link
Internet links start with http or https
I use a private discord server as my image host. Look around online to find a method that works for you
@Falkenwut thanks! How will you rebuild it?
@TheTomatoLover a pc with drawing tablet can, but good luck running on a tablet itself
@BogdanX
Absolute XYZ coordinates
TargetX =
Longitude + TargetDistance * sin(TargetHeading)TargetY =
Altitude + TargetDistance * sin(TargetElevation)TargetZ =
Latitude + TargetDistance * cos(TargetHeading).
Speed uses rate function to get XYZ rate of change, then use the distance between two points formula
TargetSpeed =
sqrt(pow(rate(TargetX),2) + pow(rate(TargetY),2) + pow(rate(TargetZ),2))2302232000 >
2302232200 >
"why does it have such a short nose"
it's my own art direction, it's supposed to look a bit like a small bird
@BogdanX @ALRX ok, I updated the XML
@FlyingPatriot
The jar is nice
@FlightFun copy both at the same time
Big brain
When it tells you a variable is missing, it means you haven't copied it in
It's quite a process
hi fellow sussei enjoyer
Make sure you copy all variables needed, and put them in the same order in your plane
Basically anything that looks like it comes from an anime, like F-15S/MTD and Su-47
F/A-18 (my country doesn't use them)
A-4 with engine removed
F/A-18, only ever seen one of those
I see a lot of F-15s but they are very common in my area, so less coolness
@LogoAndCars1 yes except in a CPU/GPU utilization sense
Use alpha tag with a timer ternary list like:
{timer<0.1?"FF":(timer<0.2?"E0":( ... ))}
Where timer is an animation timer that is zero at full opacity, for example:
smooth(activate ? timerMax : 0, 1)
@FlickerDefenseIndustries compare a target stored value with the current heading and use that to control your gyro
Instead of putting rotators at the camera, put them in the aircraft and nudge the camera back
@IAlsoBuildPlane zeroOnDeactivate works on the activation group of the input controller
If true, the input is forced to zero when activation is false
If false, the input does not change when activation is false
Personally, i don't use the activation input now that funky trees is a thing, so i don't use zeroOnDeactivate
@SimpleAreospace i did some test for it, but when i move the attachment point, the part connected to it doesn't move together
requiem of the phantasma
Maybe you have not made your gravatar account yet. It is separate from a sp account
X is longitude
Y is altitude
Z is latitude
Don't know what that means, try to draw a timing diagram
Not natively, but try running the exe with wine and see if it works
Idk, my favorite driver is usually whoever is in second at the time
Put fuselage intakes on the engine and nudge them inside to hide them
@Kurizin i'm unable to help, as it works for me
@Kurizin this exception should not happen normally, there is probably a bug in your game install
The exception is also probably not related to funky trees, if the problem is UnityEngine.Touch
Try:
- reload the game
- restart your PC
- reinstall the game
@Kurizin check dev console for errors?
@THEEND8238927373627 no, but if you know it, you can add features to your map
@THEEND8238927373627 tl;dr moment
- download unity (specified version)
- download mod tools from pc game, otherwise nick it from actual jundroo link (may be old version)
- create unity project, check that version is correct, download correct one if it's not
- apply certain simpleplanes specific project settings (search online)
- use unity (watch jundroo tutorials for simpleplanes specific info)
- good luck lmao, remember that simpleplanes modding tutorials contain simpleplanes specific information that you can't make mods without
read this
If you can access your aircraft XML:
this
Else:
You can't
@Aeres91
- Not exactly. You can post screenshots in forums, or make videos. You cannot directly advertise a build or ask for upvotes. To help others to notice your builds, try to make a more attractive thumbnail. Guide I found by searching "good thumbnail", the first section applies to players on all platforms
- Use the forums
@winterro idk what that means but good luck on the rickrolling
There are builds where I can do 8 hour sessions on
And there are the builds where I put 1 part and then leave for a week
You need unity to make mods.
You can download models or export your own from blender to unity and use them in your mod. The only way to put custom 3d models in the game is with a mod.
You don't need coding for maps and designers. But you need it for parts and custom levels.
No maximum file size. But if the mod is under 20 MB, you can host it on simpleplanes.com
Mods may delete your post if it's too far off topic. If your story is related to planes or your simpleplanes builds lore, it's probably fine
No
Look for curated planes, at least some will have realistic cockpits
@CanadianAircraftBuilder you can move the build camera inside the plane without selecting parts
maybe it's just because i don't have a (good) mouse
Yes, but keep mobile for building
CoM too far back
Did more testing, made a new button which is more funky
Fan car but the fan is visible (aka plane)
Add delay between cycles of trigonometric function
cos(lerp(0, 360, inverselerp(0, TRIG_PERIOD, repeat(Time, TRIG_PERIOD+TRIG_PAUSE))))TRIG_PERIOD: Time taken for the trigonometric function to animate from 0 to 360 degrees.(In your case, 360deg / 500deg/s = 0.72s)
TRIG_PAUSE: Pause duration between animations.literally top combat 77 maverick skies unseen complete edition 4k uhd no virus moment
Hi mark,
You cannot put file directories as links as only you will be able to see the files. Upload images to an image hosting service and copy the link
Internet links start with http or https
I use a private discord server as my image host. Look around online to find a method that works for you
@sacul77777 open overload, change scale value