I agree with BlackBoA. By the way, to tag a user and thus notify him of your comment, you need to put "@" in front of their username. For example, I'd tag you by writing @Oofsoda, and you'd get a notification even if it's not on your post.
@MAHADI as far as I know, it is done by scaling the part to a negative value. It is then transparent from the outside but not from the inside. I've tested the bubble ship, and it seem that builder only used that for screenshots, and didn't keep it on the build, as that would ruin the cockpit view.
Ok, I did test it, and I've got a few suggestions for improvement:
1. Do the entire trailing edge like you did ailerons. While the technique used for wing roots looks smoother, it doesn't merge too well with ailerons.
2. Add trim. Dunno why you didn't already.
3. Move CoM further back and reduce "brakeTorque" of wheels so it doesn't nose over when you try to brake on landing.
Other than that, very nice build.
@Datom no problem. While I can't test this build now, from projections and stats it seems pretty good. Wings might be a bit too large, but drag, power-to-weight, and the rest of the visuals seem fine.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed as music used in it is inappropriate. Please check the video for things that are against the rules of this website before posting it here.
I suggest using this technique to get custom control surfaces fairly easily. If you want more complex wings, you can find ways to improve that technique or use that technique until you master a better one. If you have any questions regarding the above-mentioned technique, I'll be happy to explain.
I fully support this. You dev people should interact with the community more. And since every one of my build in the last two years has spent time on the front page and what I'm preparing for upload is even better, can't wait to see my builds being played with :)
5pm CTZ is midnight by GMT+2, so I should be free to watch streams. I prefer YouTube over Twitch.
Your post has been removed because it appears to have broken the website rules. You can read them here. You cannot just repost other people's builds. Even if you gave credit, there are no significant changes to the build.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed for being too far off-topic. I understand that you are struck by the tragedy mentioned in the post and need to talk about it, but please do it elsewhere. If you're not active in any less specialised communities, you can use SP-related Discord servers. You can find some in my bio.
You must find another way to know who's interested in your giveaway. Asking for upvotes is forbidden by the rules. I have edited the post to remove the part asking for upvotes.
What I meant by that reply to your message is "I'm not willing to entirely remove RP from the site forcefully". It would cause a lot of drama and make situation worse. However, I do agree that there are too many RP posts these days, many of which are unnecessary and are cluttering the forums. While there is no rule against such posts, I too would like to see all RPs move to Discord or other chat apps.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
@Viper3000ad set max to 0.8 and min to 0.4 and 10° angle. Or, if it should deflect +-4° as aileron and -4° as a flap, "0.4,-0.4" on one rotator and "0,-0.4" on the other.
@MintLynx comment shortcuts are fine as they have nothing to do with voting system. As for upvote links, I'd appreciate if you would stop making them. No need to edit the old posts to remove the existing ones.
@MintLynx it's a bit of a voting system abuse. While not very harmful here, as it clearly looks like an upvote button and thus isn't deceiving anyone, I'd rather not have to filter acceptable and unacceptable cases of upvote links.
Design is very nice, although that view-obstructing rotator on the hood was unnecessary. Power to weight ratio and lift seem good, although the plane is very nose-heavy and pulls to the left due to CoM being off-center. Adding around 150lbs to the right wing fixes the roll issue, while "pre-trimming" by angling the horizontal stabilizer would fix the nose heaviness.
oof
I agree with BlackBoA. By the way, to tag a user and thus notify him of your comment, you need to put "@" in front of their username. For example, I'd tag you by writing @Oofsoda, and you'd get a notification even if it's not on your post.
+1You forgot to post pictures Beefy.
+1@Nuclearbomber36 it's classified. Might be an ordinary nuclear reactor :)
@MAHADI no problem.
@Suica :)
@MAHADI as far as I know, it is done by scaling the part to a negative value. It is then transparent from the outside but not from the inside. I've tested the bubble ship, and it seem that builder only used that for screenshots, and didn't keep it on the build, as that would ruin the cockpit view.
+1@Datom no problem buddy.
Ok, I did test it, and I've got a few suggestions for improvement:
1. Do the entire trailing edge like you did ailerons. While the technique used for wing roots looks smoother, it doesn't merge too well with ailerons.
2. Add trim. Dunno why you didn't already.
3. Move CoM further back and reduce "brakeTorque" of wheels so it doesn't nose over when you try to brake on landing.
Other than that, very nice build.
Quite impressive for a bronze level user. I like it.
+1Please remind me to test it in the next ten to fifteen hours. I'm off to sleep and I'm expecting to be busy in the morning.
@Datom no problem. While I can't test this build now, from projections and stats it seems pretty good. Wings might be a bit too large, but drag, power-to-weight, and the rest of the visuals seem fine.
Your post has been removed as it is a copy of this post. You have been issued a strike.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed as music used in it is inappropriate. Please check the video for things that are against the rules of this website before posting it here.
Memorial posts are forbidden by site rules. You can read them here.
Well, it broke the rules. The name is two curses in Russian.
Your post has been removed for being too far off-topic.
I suggest using this technique to get custom control surfaces fairly easily. If you want more complex wings, you can find ways to improve that technique or use that technique until you master a better one. If you have any questions regarding the above-mentioned technique, I'll be happy to explain.
+4Your post has been removed because it appears to have broken the website rules. You can read them here
I fully support this. You dev people should interact with the community more. And since every one of my build in the last two years has spent time on the front page and what I'm preparing for upload is even better, can't wait to see my builds being played with :)
+125pm CTZ is midnight by GMT+2, so I should be free to watch streams. I prefer YouTube over Twitch.
@TheFantasticTyphoon should be. Just check it for rule-breaking content.
+1Your post has been removed because it appears to have broken the website rules. You can read them here. You cannot just repost other people's builds. Even if you gave credit, there are no significant changes to the build.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Your post has been removed for being too far off-topic. I understand that you are struck by the tragedy mentioned in the post and need to talk about it, but please do it elsewhere. If you're not active in any less specialised communities, you can use SP-related Discord servers. You can find some in my bio.
@DeboStreams yes, we can.
@Nickr post, comments, and bios. We have the same level of access to your post that you do.
You must find another way to know who's interested in your giveaway. Asking for upvotes is forbidden by the rules. I have edited the post to remove the part asking for upvotes.
+3That's what happens when you don't make unlisted backups. I have all my projects backed up on the site in case something happens to my laptop.
+1I agree with NANOMAN. Also, you should have reduced the elevator deflection, as it easily stalls the plane when fully deflected.
@Suica no problem.
@MAHADI indeed.
Do Cessna 177.
+1Have you tried percussive maintenence?
What I meant by that reply to your message is "I'm not willing to entirely remove RP from the site forcefully". It would cause a lot of drama and make situation worse. However, I do agree that there are too many RP posts these days, many of which are unnecessary and are cluttering the forums. While there is no rule against such posts, I too would like to see all RPs move to Discord or other chat apps.
+5Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
@Viper3000ad set max to 0.8 and min to 0.4 and 10° angle. Or, if it should deflect +-4° as aileron and -4° as a flap, "0.4,-0.4" on one rotator and "0,-0.4" on the other.
+4It flies quie well, so you can have the upvote back, but that's a major flaw.
+1Why are elevators separate from stabilizers? MiG-21 has an all-moving tail.
@Viper3000ad you can edit rotators to only move one way. Set "max" value to "0".
@Viper3000ad no problem. Don't forget to edit drag, as gliders have very little of it. Can't wait to see it done.
+1It could have even been one per side, as there is apparently no thickness taper. Still, nice.
+3Your post has been removed because it appears to have broken the website rules. You can read them here
@MintLynx comment shortcuts are fine as they have nothing to do with voting system. As for upvote links, I'd appreciate if you would stop making them. No need to edit the old posts to remove the existing ones.
@MintLynx it's a bit of a voting system abuse. While not very harmful here, as it clearly looks like an upvote button and thus isn't deceiving anyone, I'd rather not have to filter acceptable and unacceptable cases of upvote links.
No problem. I don't remember the sb-4 enforcer, but I'm glad to have helped :)
Design is very nice, although that view-obstructing rotator on the hood was unnecessary. Power to weight ratio and lift seem good, although the plane is very nose-heavy and pulls to the left due to CoM being off-center. Adding around 150lbs to the right wing fixes the roll issue, while "pre-trimming" by angling the horizontal stabilizer would fix the nose heaviness.
+4