it is not the guy who built the plane that is involved but all the others who gave it importance ... In short, those who upvoted are no better than the quality of this plane. Pathetic.
What is that ?? Another stupid, ugly, weird thing, done in 5 minutes, that gets 4,634 downloads, and 197 upvotes, whatever happens to the Sp community, you just have to post a basic thing to write "yeet bois" or a strange thing in the genre in the description for have so many rewards, what a deplorable state of mind ...
@MadAgus
Thank you for your comment! Glad you like it! Indeed, basically, it was intended to be launched from a lubricated rail, the booster separating from the plane and remaining on the rail, but as we are on SP, it would be complicated to make a large rail, I I therefore chose to fly the booster by designing it more like a two-stage rocket.
The Soviet version would be nice too, yes.
@MadAgus
For my silbervogel, I found some examples to have a coherent cockpit, I adapted a nice opening system, once again, automated, it will be the one-seater version, and the machine will have a booster which will detach automatically with funkees, at about mach2, I still found examples of the booster, although normally it should have been on rails, but that it could fly with the aircraft doesn't seem inconsistent to me, especially given the structure that such an installation would represent...
For it to be posted within the week seems a bit short to me, especially given the work, but within two weeks it will be published.
For me, I still have the wings, the gear, the interior of the cockpit (although I have already prepared some stuff), and everything that will be part of the livery, although the plane is already two-tone ( silver and black), what's nice with my Silbervogel is that it will have some nice funky features, even if the performance will be a little behind what it is advertised in reality, since the SP physics is weird, and doesn't have rocket engines, even if we can modify the power of the motor and limit its acceleration to make things more realistic, we can also trigger motors at different altitudes automatically thanks to the funky, the motor will always need air, and that bothers me, since arrived at a certain altitude, impossible to go to more than Mach 8, and it is not a problem of drag.
@MadAgus Of course.
I'm back to work, so, I don't have a lot of time... My silbervogel will move a little slower, but it will be, I think, my finest creation.
Well, I upvoted your plane this morning, and I comment that now, I find it good, the canopy is also good, I haven't had much time lately to make progress on my Silbervogel, but I think the finish this week.
@MadAgus The Americans even nicknamed it "Baka" (stupid in Japanese), the easiest way would be to do it without a carrier plane, we would just have to spawn it in the air..
@MadAgus To tell the truth, this Silbervogel represents a bit of work, especially at the Funky level, but I say no more !
I can't wait to see your creations otherwise. (for the name of the Japanese rammer, I have a little idea, does it start with an O and end with an A ? )
This ship is undoubtedly one of the most beautiful warships in the game, it is seen that you have spent time making it. I love the camo too, and I like how it's constructed.
With this ship, there is no doubt that you will have a place on the podium of this challenge, even if I note that there are very beautiful elements in this challenge.
@MadAgus In fact, it seems to me that it cost me about 40€, it's not huge, it's about the same price as my revell SR71 (and D21 drone included in the box)..
@MadAgus That's exactly why I bought it ! There was pressure on Revell to withdraw it from sale, and it was banned in France, I bought one at the right time at an affordable price. Now they are expensive. And I don't even talk about the price of the Squadron Model's one.
@MadAgus I'm thinking of making the silbervogel first, then the Vril 7, and yes, the silbervogel has always interested me, I was even thinking of buying it as a model (sometimes, I build models of planes, tanks, and ships, I have a few boats, mainly French, so the aircraft carrier Charles De Gaulle! And in planes, I have an SR71, a Haunebu Revell, as well as a Horten HO IX, a Jaguar, a Mirage III, a Rafale being assembled...)
Un avion hélas peut connu, produit à peu d'exemplaires, mais esthétiquement très réussi et tout métal. Et en termes de perfs, c'était l'un des meilleurs de son temps !
Ta réplique est bien faite, j'aime bien, et si tu veux continuer dans les protos d'avions belges de la 2nd guerre, pourquoi pas un R37 ? Ce truc a inspiré le FW190..
Good Haunebu !
There are many similarities with my IIB (and also my III), the portholes are however of a different model, (mine are small armored holes), the interior is very successful.
Only criticism (because I always have to make one), the turret is not auto-aim.
But it does not matter, the whole is successful, and it is a good Haunebu !
Wow, it's strange, massive, but nice.
+2Tres joli, c'est le meilleur Etendard du site
+2it is not the guy who built the plane that is involved but all the others who gave it importance ... In short, those who upvoted are no better than the quality of this plane. Pathetic.
+2What is that ?? Another stupid, ugly, weird thing, done in 5 minutes, that gets 4,634 downloads, and 197 upvotes, whatever happens to the Sp community, you just have to post a basic thing to write "yeet bois" or a strange thing in the genre in the description for have so many rewards, what a deplorable state of mind ...
+2I love this plane, nice work, it's a very good job, and the detail is always well done on all your planes.
+2Wow, nice.
+2@503rdAirborneSoldier
+2No it is the Ennemy, on the found in the planesdesigner.
inronclads are cool
+1@MadAgus
+1Thank you for your comment! Glad you like it! Indeed, basically, it was intended to be launched from a lubricated rail, the booster separating from the plane and remaining on the rail, but as we are on SP, it would be complicated to make a large rail, I I therefore chose to fly the booster by designing it more like a two-stage rocket.
The Soviet version would be nice too, yes.
@GeneralCorpInc
+1valentine's day ?
+1What the hell is that ?
@MadAgus
+1For my silbervogel, I found some examples to have a coherent cockpit, I adapted a nice opening system, once again, automated, it will be the one-seater version, and the machine will have a booster which will detach automatically with funkees, at about mach2, I still found examples of the booster, although normally it should have been on rails, but that it could fly with the aircraft doesn't seem inconsistent to me, especially given the structure that such an installation would represent...
For it to be posted within the week seems a bit short to me, especially given the work, but within two weeks it will be published.
For me, I still have the wings, the gear, the interior of the cockpit (although I have already prepared some stuff), and everything that will be part of the livery, although the plane is already two-tone ( silver and black), what's nice with my Silbervogel is that it will have some nice funky features, even if the performance will be a little behind what it is advertised in reality, since the SP physics is weird, and doesn't have rocket engines, even if we can modify the power of the motor and limit its acceleration to make things more realistic, we can also trigger motors at different altitudes automatically thanks to the funky, the motor will always need air, and that bothers me, since arrived at a certain altitude, impossible to go to more than Mach 8, and it is not a problem of drag.
+1@MadAgus These are great projects ! Do not hesitate to mention me, even if it is possible that it is several days before I see the ping !
+1@MadAgus Of course.
+1I'm back to work, so, I don't have a lot of time... My silbervogel will move a little slower, but it will be, I think, my finest creation.
Well, I upvoted your plane this morning, and I comment that now, I find it good, the canopy is also good, I haven't had much time lately to make progress on my Silbervogel, but I think the finish this week.
+1@MadAgus The Americans even nicknamed it "Baka" (stupid in Japanese), the easiest way would be to do it without a carrier plane, we would just have to spawn it in the air..
+1@MadAgus To tell the truth, this Silbervogel represents a bit of work, especially at the Funky level, but I say no more !
+1I can't wait to see your creations otherwise. (for the name of the Japanese rammer, I have a little idea, does it start with an O and end with an A ? )
Interesting, unknown and strange project !
+1As for me, I think my Silbervogel should be out soon..
This ship is undoubtedly one of the most beautiful warships in the game, it is seen that you have spent time making it. I love the camo too, and I like how it's constructed.
+1With this ship, there is no doubt that you will have a place on the podium of this challenge, even if I note that there are very beautiful elements in this challenge.
Nice ship !
+1@MadAgus In fact, it seems to me that it cost me about 40€, it's not huge, it's about the same price as my revell SR71 (and D21 drone included in the box)..
+1@MadAgus That's exactly why I bought it ! There was pressure on Revell to withdraw it from sale, and it was banned in France, I bought one at the right time at an affordable price. Now they are expensive. And I don't even talk about the price of the Squadron Model's one.
+1@MadAgus I'm thinking of making the silbervogel first, then the Vril 7, and yes, the silbervogel has always interested me, I was even thinking of buying it as a model (sometimes, I build models of planes, tanks, and ships, I have a few boats, mainly French, so the aircraft carrier Charles De Gaulle! And in planes, I have an SR71, a Haunebu Revell, as well as a Horten HO IX, a Jaguar, a Mirage III, a Rafale being assembled...)
+1@MadAgus Probally a Vril 7, or a silbervogel silver bird.
+1@MadAgus Glad you like it !
+1Si tu veux bien tester mon Mirage MD750 ?
+1https://www.simpleplanes.com/a/Q1nhUJ/Mirage-MD750
Bon, après, je publie un autre haunebu demain..
FT17 look
+1It's your second Alfa, as I can see.
+1If you want to make another one, why not a 2300 Monza, I like this model.
Nice saucer.
+1Un avion hélas peut connu, produit à peu d'exemplaires, mais esthétiquement très réussi et tout métal. Et en termes de perfs, c'était l'un des meilleurs de son temps !
+1Ta réplique est bien faite, j'aime bien, et si tu veux continuer dans les protos d'avions belges de la 2nd guerre, pourquoi pas un R37 ? Ce truc a inspiré le FW190..
Aérospatiale* Alouette III
+1Otherwise, nice build, but Vulcans have no place on this helicopter.
If I understand correctly, this is your first plane ?
+1Tremendous.
Well, strange thing.
+1Congrats for gold !
@Bryan5
+1@ImSimon
@IAlsoBuildPlane
@SyntheticL
+1@SPairforce
@Dragoranos
Damn, this is a nice ship.
+1Really good Mirage for 25 parts.
+1Pas mal du tout ton Heinkel !
+1Il aurait cependant pu être un peu plus maniable.
Incredible plane.
+1Toi aussi ?
+1Tu me déçois.
Il est incroyable.
T
+1@GainTale I don't see any others major flaws.
+1@ollielebananiaCFSP "One of the best", not the best.
+1T
+1Good Haunebu !
+1There are many similarities with my IIB (and also my III), the portholes are however of a different model, (mine are small armored holes), the interior is very successful.
Only criticism (because I always have to make one), the turret is not auto-aim.
But it does not matter, the whole is successful, and it is a good Haunebu !
@TheHaggisBasher
+1Right now, I don't have time, there's a project in the works, but we'll have to wait a bit.
@UmbrellaCorporation Ah okay, I don't know how its work on android.
+1@UmbrellaCorporation
+1Download, undo, and redo, and you will get the plane without mods
Looks like a Leduc.
+1