Disclaimer This aircraft has been designed with more wing than a conventional biplane. This, together with its low weight and wing profile, gives it a very low stall speed. The rear wings also have an angle of inclination, which help keep the plane stable, even when it enters auger. On the other hand, the values of stall speed are quite relative, especially when compared to other biplanes, for example this one that is more modern EEA Biplane. the EEA Biplane has a stall speed of 40mph. This Fokker has a stall speed of 30mph, just 10 mph less. It is not so crazy. This type of aircraft, they were almost ultralight. Another example of low stall speed is this plane https://www.simpleplanes.com/a/J6gnUG/Stunt-plane of @randomusername wich configure it with a stall speed of 30 ~ 35mph
@T8flightcrafts However, I do not know everything. We should have a tutorial that will teach us how to manage AI units so they can do air patrols for example. Or for example a tutorial to import other models of ships and tanks, without penalizing the performance of the game. There is a lot of work. I do not know if you can do all that with Unity, but we are trying it and asking other more advanced users, to learn how to do it. Many of these things already require programming knowledge in C-SHARP. I still have a hard time understanding its operation. So, ideally, it would be that the Asset Modtools of SimplePlanes, include all these possibilities and in case of including them, that would explain in a tutorial how it is done. The idea is to make the task as easy as possible, so that anyone can design their missions and share them with the community. It would give a lot more life to the game ...
@T8flightcrafts There are still many steps in this tutorial. When I finish it, I'll start another tutorial to teach how to create more realistic terrains. Then, I have to do a mini-tutorial to teach how to manage the convoy units. And finally a tutorial to import 3D models in the maps. I forgot ... tutorial to create mods designers.
@WarHawk95 I would love it but there are some limitations. It is not simple. Unfortunately I do not know how to place air units that follow a route. However, convoys do have that option. On the other hand, in the tests that I have done, the enemy planes attack each other. I do not know if I'm the only one who happens or has not been developed in the Asset of SimplePlanes for Unity. Either we need a tutorial to learn how to do that. Due to all this, I have started to develop a tutorial to create maps. I would like there to be more information about these things and that it be shared for the benefit of all.
@WarHawk95 Each one builds the planes he wants... I do not like to waste time building real planes. In fact, I do not usually have much time. I like more to imagine fictitious planes, similar to others or from ideas that I have elaborated. I'm more creative... I think that is the grace that the game has. This game allows me to create any idea I have. Anyway, the important thing is that we all have a good time... But now that you say it, I've made some replicas... for example...
@MisterT I am completing a new map and I would like to add some enemy planes. The problem is that I do not know how to control them well. This is to make a patrol and attack the player without attacking each other. Can you give me some clue, have you managed to solve it?
@logizAircrafts Yes, I will explain how to do it later. There are several techniques to do it. It can be pre-designed or it can be drawn on the spot. Using one technique or another has its advantages and disadvantages.
@AviownCorp Thank you! I've had a lot of work these weeks, I did not have time... Although I can not publish as many airplanes as before, we will have some interesting manufactures
@ViridiCinis I have not finished the tutorial yet. you need to enter the map start and save all the objects. in the tutorial will be explained in the next few days
@ViridiCinis i answer you in the next days in the tutorial. But a quick answer is That you must add colliders to the object and declare the object as terrain... I will teach this in the tutorial in brief
@Hayhayjam664 Yes, do not give up. I still have to complete this tutorial. I want to teach how to make maps similar to the ones I do. I want everyone to dare to make maps and mods
@CarsonG1017 The key to doing that is in this other manual. You have to have well installed Unity ... take a look here https://www.simpleplanes.com/Forums/View/729515 It all depends on if you have correctly installed JAVA and the components for Android, as indicated ...
@destroyerP Many thanks. I had wanted to make this article for a long time. But I could not before. The images will be loading, I still have a lot of work to do. They will be available soon. On the other hand, that data that you have given me is very important. I will include it so that it is complete. Thank you very much again!
@ViridiCinis hi again, i´ve just seen the properly checkbox option. It´s named "Static". Please follow the next steps:
a) Select the map or terrain
b) Click on "inspector tool"
c) Uncheck the checkbox named "Static"
d) Repeat steps with all terrains
e) Save project
@ViridiCinis yes, the problem is the render option is active in the map. You must uncheck It, this checkbox is in the top right window. I must complete the tutorial about this questions...
@Chancey21 no no... Os not forbiden
@Heihachi you decide passengers, but rules say must be a light plane...
+1@Spectre2520 I use an specific designer mod
Disclaimer This aircraft has been designed with more wing than a conventional biplane. This, together with its low weight and wing profile, gives it a very low stall speed. The rear wings also have an angle of inclination, which help keep the plane stable, even when it enters auger. On the other hand, the values of stall speed are quite relative, especially when compared to other biplanes, for example this one that is more modern EEA Biplane. the EEA Biplane has a stall speed of 40mph. This Fokker has a stall speed of 30mph, just 10 mph less. It is not so crazy. This type of aircraft, they were almost ultralight. Another example of low stall speed is this plane https://www.simpleplanes.com/a/J6gnUG/Stunt-plane of @randomusername wich configure it with a stall speed of 30 ~ 35mph
Good design! I like this. I have a plane that looks like this. I'm completing it. I link you when I publish it.
This is very original biplane, good job!
+1@Tessemi Yes, the idea is that of a transformed Mig-19 ;-)
@T8flightcrafts However, I do not know everything. We should have a tutorial that will teach us how to manage AI units so they can do air patrols for example. Or for example a tutorial to import other models of ships and tanks, without penalizing the performance of the game. There is a lot of work. I do not know if you can do all that with Unity, but we are trying it and asking other more advanced users, to learn how to do it. Many of these things already require programming knowledge in C-SHARP. I still have a hard time understanding its operation. So, ideally, it would be that the Asset Modtools of SimplePlanes, include all these possibilities and in case of including them, that would explain in a tutorial how it is done. The idea is to make the task as easy as possible, so that anyone can design their missions and share them with the community. It would give a lot more life to the game ...
+1@T8flightcrafts There are still many steps in this tutorial. When I finish it, I'll start another tutorial to teach how to create more realistic terrains. Then, I have to do a mini-tutorial to teach how to manage the convoy units. And finally a tutorial to import 3D models in the maps. I forgot ... tutorial to create mods designers.
+1@WarHawk95 I would love it but there are some limitations. It is not simple. Unfortunately I do not know how to place air units that follow a route. However, convoys do have that option. On the other hand, in the tests that I have done, the enemy planes attack each other. I do not know if I'm the only one who happens or has not been developed in the Asset of SimplePlanes for Unity. Either we need a tutorial to learn how to do that. Due to all this, I have started to develop a tutorial to create maps. I would like there to be more information about these things and that it be shared for the benefit of all.
+1@DankDorito The aircraft is made in China
+1@WarHawk95 Each one builds the planes he wants... I do not like to waste time building real planes. In fact, I do not usually have much time. I like more to imagine fictitious planes, similar to others or from ideas that I have elaborated. I'm more creative... I think that is the grace that the game has. This game allows me to create any idea I have. Anyway, the important thing is that we all have a good time... But now that you say it, I've made some replicas... for example...
- AG PZL M-15 Belphegor
- Dassault Mirage ADV 50
- Saunders-Roe SR.A3
- Grumman F-8F Bearcat
- Saab J-35 Draken
- Gloster Meteor F-8
- Messerschmitt Me 262 Schwalbe
+2@WarHawk95 Yes ;-)
@kbarnett2008 It is a fictitious airplane based on the Mig-19
@MisterT I am completing a new map and I would like to add some enemy planes. The problem is that I do not know how to control them well. This is to make a patrol and attack the player without attacking each other. Can you give me some clue, have you managed to solve it?
Great Challenge!
@logizAircrafts Yes, I will explain how to do it later. There are several techniques to do it. It can be pre-designed or it can be drawn on the spot. Using one technique or another has its advantages and disadvantages.
@logizAircrafts No problem! As you have seen, it is clicked and dragged to the desired position ;-)
@ThePilotDude if only for pc, its enought with Unity. If you want export to Android, requiere all components of this tutorial
@Squirrel thank you again! I add this source 😉😉
+1@Chancey21 is fictional ;-)
+1@Squirrel Thank you very much!!! i will add this tip ;-)
+1@MAHADI i will try 😉
@Tang0five @MAHADI @Treadmill103 Thanks for being there!
@TUA54 @Morel234 @MEERKAT978 a pleasure to return with you!
+1@AviownCorp Thank you! I've had a lot of work these weeks, I did not have time... Although I can not publish as many airplanes as before, we will have some interesting manufactures
+1@ViridiCinis I have not finished the tutorial yet. you need to enter the map start and save all the objects. in the tutorial will be explained in the next few days
Great work!!!
@MisterT thank you very much 😉😉😉
@MisterT Hi again, i´m trying use in the console, but gave me this message... "Command terrain not found" can you help me?
@MisterT I'll need your help later with some questions ... do you want to help me?
@Hayhayjam664 In this tutorial we will try to explain it step by step ... I will try to complete it in the coming days and there will be more ...
+1@ViridiCinis i answer you in the next days in the tutorial. But a quick answer is That you must add colliders to the object and declare the object as terrain... I will teach this in the tutorial in brief
@ViridiCinis I'm writing a mega tutorial about develop Maps... https://www.simpleplanes.com/Forums/View/863709/ModMapSimplePlanes-Your-first-map
@DuckMint there are a better tips to develop terrain... this tutorial still unfinished
@Hayhayjam664 Yes, do not give up. I still have to complete this tutorial. I want to teach how to make maps similar to the ones I do. I want everyone to dare to make maps and mods
+1@CarsonG1017 The key to doing that is in this other manual. You have to have well installed Unity ... take a look here https://www.simpleplanes.com/Forums/View/729515 It all depends on if you have correctly installed JAVA and the components for Android, as indicated ...
+1@HistoricBirds yes of course
@destroyerP Many thanks. I had wanted to make this article for a long time. But I could not before. The images will be loading, I still have a lot of work to do. They will be available soon. On the other hand, that data that you have given me is very important. I will include it so that it is complete. Thank you very much again!
+1@ViridiCinis hi again, i´ve just seen the properly checkbox option. It´s named "Static". Please follow the next steps:
a) Select the map or terrain
b) Click on "inspector tool"
c) Uncheck the checkbox named "Static"
d) Repeat steps with all terrains
e) Save project
@ViridiCinis yes, the problem is the render option is active in the map. You must uncheck It, this checkbox is in the top right window. I must complete the tutorial about this questions...
@MisterT and i agree with you about design a simple plane for fly
@MisterT https://discord.gg/uMXZEm join to our discord squad... and this is our web page https://sites.google.com/view/darkfalconssquad/
@MisterT in our squad we try It, but the problem was find an hour to meet all members. I would like fly in acrobatic team
@Stonewarrior272 great!!
We can do It something like this... What do you think?
+1I already bought it! thanks for making amazing games!
Great work!! Really nice!!! Thank you very much!! Soon i will test It!
Rafale inspired? Good design
It remember a Peacemaker
+1