Wait... First question, why do your custom wings look like this? Adding custom control surfaces looks WAY better.
Two, why are the control surfaces so small? Those will never do anything
Three, why did you add so much weight to the back?
Four, why do the wings bend forwards? This means the aircraft will want to push down. If you want more lift, wings ALWAYS bend backwards.
Also, this thing is ridiculously heavy for only two engines. And the wings also are straight, meaning they need more force.
And finally, you might want to round the aerofoils. It looks WAYY better. Yours are just blocks
@realSavageMan I'm going to start on my plane for this here soon. I just finished up my last project, and then I am also working on another at the same time, so it might be a few days
@captainlevi820 I tested it multiple times with and without jet engines at Wright... it should be able to take off.
Pull up hard until it lifts off at about 206 mph. If you have jet engines, put the flaps down and the trim down, and then it takes off at around 180 mph
@AntiAirNuri first off, thank you for your feedback.
Yes, the propellers needed to be modded in order to work (there are a LOT of drag points) and they still are underpowered when 1/3 of the original drag points are present. I and yes, the B-36A and B models are just propeller. But later on, jet engines were fitted when the USAAF became the USAF. Every model D and up had jet engines to assist with higher speeds, higher altitudes, and shorter take offs. The C model was never built, but it looked weird
And yeah, I tried a different style for the wings. I needed them thinner at the back, and it turned into this lol. It came out better than it could have, but I still could have done better. The flaps... lol... yeah. They would be a bit longer is the issue, but I had no room and it already was to scale. Either way, it still assists with take-offs.
You literally just reposted the same plane...
And custom landing gear look so much better too.
I like this plane though! Good luck. I'm working on it right now to see what I can do while only working on the physics
Wait... First question, why do your custom wings look like this? Adding custom control surfaces looks WAY better.
Two, why are the control surfaces so small? Those will never do anything
Three, why did you add so much weight to the back?
Four, why do the wings bend forwards? This means the aircraft will want to push down. If you want more lift, wings ALWAYS bend backwards.
Also, this thing is ridiculously heavy for only two engines. And the wings also are straight, meaning they need more force.
And finally, you might want to round the aerofoils. It looks WAYY better. Yours are just blocks
'Tis I!
Based on the King Air and the Cessna 337
I might build a low-wing GA aircraft with this
Thanks! @K2K (I know it is for the reward, but still, thanks)
@realSavageMan I'm going to start on my plane for this here soon. I just finished up my last project, and then I am also working on another at the same time, so it might be a few days
This think looks awesome! Imma fly 'er around rn
@PapaKernels I have now... XD
OOOOOOOH
Hehehehehhe
Never thought I'd say this... but this guitar is fun to fly lol
Really neat! This is a unique design lol
Amazing!
@TrojanAircraftSystems lol, yup. And thanks!
@SPMTB oh, okay! lol, no worries
Oh, and out of curiosity, when are you planning your next challenge to be released? (No pressure, I'm just curious)
Cool!
This thing is wicked!
Rock on dude surfer accent
T
T
Mustang. All the way
Awesome!
This is amazing though
And I thought you were joking about the
BRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRTTTTTT
lols
This thing is a beauty. I love it
@TheVexedVortex That was amazing
Oh, and tag please!
Thanks! @Sarnnox
Awesome!
Simp.
@MrShenanigans yes
Thanks! @ACEPILOT109 @MIAW26PERSIAN
@PapaKernels lol, thanks
@captainlevi820 I tested it multiple times with and without jet engines at Wright... it should be able to take off.
Pull up hard until it lifts off at about 206 mph. If you have jet engines, put the flaps down and the trim down, and then it takes off at around 180 mph
@AntiAirNuri first off, thank you for your feedback.
Yes, the propellers needed to be modded in order to work (there are a LOT of drag points) and they still are underpowered when 1/3 of the original drag points are present. I and yes, the B-36A and B models are just propeller. But later on, jet engines were fitted when the USAAF became the USAF. Every model D and up had jet engines to assist with higher speeds, higher altitudes, and shorter take offs. The C model was never built, but it looked weird
And yeah, I tried a different style for the wings. I needed them thinner at the back, and it turned into this lol. It came out better than it could have, but I still could have done better. The flaps... lol... yeah. They would be a bit longer is the issue, but I had no room and it already was to scale. Either way, it still assists with take-offs.
But I suck at it too (at least the last I tried)
@639076b3d178b932391551eba yeah, airships are VTOL. But because of what they are, it's fairly easy to get matched
Thanks! @KenworthHeavyHauler
@MIAW26PERSIAN
Thanks! @TatsuTheCleaningFairy
(I meant that in a good way btw)
THIS IS SO STUPID... IT'S AWESOME
I love all the moving parts and stuff... I love this
THIS IS AWESOME
They can land on water, though... would that count as a seaplane? XD
Airships are awesome. I just am too lazy to panel the whole thing
@639076b3d178b932391551eba me neither XD. A LOT of panelling
Thanks! @WrongFlyer
@639076b3d178b932391551eba okay, will do!
@TheNightmareCompany thanks!
For KoR's challenge