@AviationLoverGEEK444 which generation of a stabilizer would it be considered IRL?
These aren't the actual ranges afaik but here
Gen I: stab up to ~10-15mph
Gen II: stab up to 20-30mph
Gen III: stab up to 40mph
Gen IV: 40mph+
@AviationLoverGEEK444 ik the KE-RP world lore is different, but IRL it was seen on the T-34 and M4 Shermans (up to 76/85mms) so stabilizers aren't exactly advanced, just more modernized
@BOSKnight tbf, the stabilizer can be foregone because firing on the move becomes exponentially harder no matter what and modern stabilizers (like on the Leo or Abrams) are only good up to 40mph
The APFSDS is what's most important
@BOSKnight realistically, that LFP is probably comparable to that of the VT5, and that UFP likely has less total milimeters of protection but is less likely to be penned due to its angle
There is a lot of distance between the front plate and driver's ports, so I'd assume there's either more armor or the fuel tanks are held up there
Gun calibre is likely between 90mm and 120mms
Hey, I recommend peeling the tracks out of the Mk5C Kit or Mk4E Fennic for your tonks, they're flat and will look nicer, but other than that, it looks great
Hey, I'm much too late to have my own country but I'd like a purpose to join this RP, would it be possible for me to make vehicles and stuff for For-Rants? I have already okayed it with Kei, but I don't want to start doing anything until I've okayed it with the RP owner.
It will be under a French-ified version of Umbra Arms, but it will be disconnected from what I've already posted on my account under Exeron, as I'd assume stuff like Dextrin or Kit are too advanced for the RP's current time frame.
I will be doing Planes, tanks, ships, and helicopters (if the RP has them yet) under the company, but also just regular vehicles
(I'm not limiting myself to just For-Rants either, that is simply the nation of origin. I'm making the company kinda like if Dassault made pretty much everything for France. I'm making a lot of their stuff, but that doesn't mean I won't export)
We really upgrading, it used to be a hawk, now we've got eagles doing it too?
Also, congrats on gold! :3
(You haven't got it yet I'm just pre-congratulating cause you're literally an upvote away)
@RepublicofWrightIsles first, look at some irl designs. The Merkava, Leopard 2, and M1 are the best modern designs (not in terms of performance but for this)
Next, start off with like a 4-6 wide underbelly, and then add another piece on top of it that's wider, thats the base to make the body and tracks
From there, just starr building onto it. I recommend always making angled U/LFPs and to build the turret realistically, think about what space each piece is taking up
Then, once the body and turret is done, start greebling If you want to, you can dissect this Or, if you wanna, you can borrow this
@BOSKnight I remember US rounds better because their system is just M### / XM### as opposed to Russia, who uses #BM## for most modern rounds. I don't remember a single British or Italian deisgnation, but I remember Swedish (Slpprj. ##) and German/Japanese designations (DM/JM-##)
@BOSKnight XM885? (I think, can't remember the name but it's the US Experimental 75mm APFSDS round for the HSTV-L and RDF-LT) had only around like 200mms of pen and its a solid APFSDS round, the Russian round used with the 2S38 is similar
(XM994 is the 152mm APFSDS the MBT/Kpz-70 project used iirc)
(Nvm I pulled XM994 out of my ass)
@SuperSuperTheSylph see, theres Heat Seeking, GPS Guided, Active/Semi Active Radar Homing, there's SACLOS and MCLOS respectively, and then there's My Eyes seeking missiles
@AviationLoverGEEK444 I have a series S that I play on mainly, but my laptop was supposedly hitting 230+ FPS when I was test flying the F-16C the other day (in Warthunder)
@BOSKnight fun fact: APHEDS would have significantly less penetration power than a standard APDS round due to the compromising of the round's homogenous metal and replacing that with a central cavity for the explosive filler
.
But when it's 150mms it doesn't matter
@AviationLoverGEEK444 like $150 but that's cause I bought it off their renewed thingie, normally it's a $200smth monitor, I can't remember the name but it's Asus
(I cannot do the T for allat]
@AviationLoverGEEK444 which generation of a stabilizer would it be considered IRL?
+1These aren't the actual ranges afaik but here
Gen I: stab up to ~10-15mph
Gen II: stab up to 20-30mph
Gen III: stab up to 40mph
Gen IV: 40mph+
@AviationLoverGEEK444 ik the KE-RP world lore is different, but IRL it was seen on the T-34 and M4 Shermans (up to 76/85mms) so stabilizers aren't exactly advanced, just more modernized
@BOSKnight tbf, the stabilizer can be foregone because firing on the move becomes exponentially harder no matter what and modern stabilizers (like on the Leo or Abrams) are only good up to 40mph
+1The APFSDS is what's most important
@BOSKnight pretty much in terms of design, but with a turret comparable to the Strv 74 (NOT IN TERMS OF PROTECTION BUT DESIGN!)
@BOSKnight realistically, that LFP is probably comparable to that of the VT5, and that UFP likely has less total milimeters of protection but is less likely to be penned due to its angle
+2There is a lot of distance between the front plate and driver's ports, so I'd assume there's either more armor or the fuel tanks are held up there
Gun calibre is likely between 90mm and 120mms
@BOSKnight then vehicles and shiz you shall receive
@AviationLoverGEEK444 fair
+1The Mk4E has a set that's attached to a small fuselage piece, if you want to make that a sub-assembly btw
@BOSKnight
+1Your-Pan will be one of the exports then, assuming Your-Pan is on good terms with For-Rants
Hey, I recommend peeling the tracks out of the Mk5C Kit or Mk4E Fennic for your tonks, they're flat and will look nicer, but other than that, it looks great
+1Hey, I'm much too late to have my own country but I'd like a purpose to join this RP, would it be possible for me to make vehicles and stuff for For-Rants? I have already okayed it with Kei, but I don't want to start doing anything until I've okayed it with the RP owner.
+2It will be under a French-ified version of Umbra Arms, but it will be disconnected from what I've already posted on my account under Exeron, as I'd assume stuff like Dextrin or Kit are too advanced for the RP's current time frame.
I will be doing Planes, tanks, ships, and helicopters (if the RP has them yet) under the company, but also just regular vehicles
(I'm not limiting myself to just For-Rants either, that is simply the nation of origin. I'm making the company kinda like if Dassault made pretty much everything for France. I'm making a lot of their stuff, but that doesn't mean I won't export)
We really upgrading, it used to be a hawk, now we've got eagles doing it too?
+1Also, congrats on gold! :3
(You haven't got it yet I'm just pre-congratulating cause you're literally an upvote away)
Bêţťęř ğëț bűįłđîñ' bøý
Give the site a lil bit and you should be gold :3
Congrats! ^^
@RepublicofWrightIsles first, look at some irl designs. The Merkava, Leopard 2, and M1 are the best modern designs (not in terms of performance but for this)
+1Next, start off with like a 4-6 wide underbelly, and then add another piece on top of it that's wider, thats the base to make the body and tracks
From there, just starr building onto it. I recommend always making angled U/LFPs and to build the turret realistically, think about what space each piece is taking up
Then, once the body and turret is done, start greebling
If you want to, you can dissect this
Or, if you wanna, you can borrow this
Tag IV:
@TateNT34
@BOSKnight
@AviationLoverGEEK444
Tag III:
@Rob119
@Rb2h
@Halcyon215
Tag II:
@Deeganwithabazooka
@dabestsock
@DrakonDynamics
Tag I:
@keiyronelleavgeek566
@KPLball
@Supersoli8
How does one achieve a perfect 0 on performance cost?
@BOSKnight I remember US rounds better because their system is just M### / XM### as opposed to Russia, who uses #BM## for most modern rounds. I don't remember a single British or Italian deisgnation, but I remember Swedish (Slpprj. ##) and German/Japanese designations (DM/JM-##)
@BOSKnight i lub spookston :3
+1@BOSKnight XM885? (I think, can't remember the name but it's the US Experimental 75mm APFSDS round for the HSTV-L and RDF-LT) had only around like 200mms of pen and its a solid APFSDS round, the Russian round used with the 2S38 is similar
(XM994 is the 152mm APFSDS the MBT/Kpz-70 project used iirc)
(Nvm I pulled XM994 out of my ass)
500mils of pen on an autocannon (between 20-75mms usually) APFSDS round with an APHE tip is wild
+2• Asgore is blissfully unaware of you
+4} Defend
"Ahh... what a weird deer shaped speedbump!"
@SuperSuperTheSylph see, theres Heat Seeking, GPS Guided, Active/Semi Active Radar Homing, there's SACLOS and MCLOS respectively, and then there's My Eyes seeking missiles
+1@SomeSPGuyWhoLikesLore hell yeah :3
+1@SomeSPGuyWhoLikesLore Anudder Deltarune mem?
+2@NotRob119 not even the 9;engine VTOL?
Petsonally, the Dassault Mirage III V / Balzac
+1Sorry you got hit by it, but I'm glad you feel better now
+1@BOSKnight yes, 100%
+1Tag IV:
@Rob119
@Rb2h
@AviationLoverGEEK444
Tag III:
@TateNT34
@BOSknight
@Halcyon215
Tag II:
@deeganwithabazooka
@dabestsock
@DrakonDynamics
Tag I:
@keiyronelleavgeek566
@KPLball
@Supersoli8
@AviationLoverGEEK444 I have a series S that I play on mainly, but my laptop was supposedly hitting 230+ FPS when I was test flying the F-16C the other day (in Warthunder)
+1@BOSKnight fun fact: APHEDS would have significantly less penetration power than a standard APDS round due to the compromising of the round's homogenous metal and replacing that with a central cavity for the explosive filler
.
But when it's 150mms it doesn't matter
@SPWithLizzie - need therapy, therapy, avertising causes -
Should make hypnotize or mezmerize
Need therapy, therapy, advertising causes need therapy, therapy, advertising causes need therapy, therapy, advertising causes, therapy therapy, advertising causes-
+1@AviationLoverGEEK444 it's a higher end monitor, I originally got it because it could hit 120fps but it's been great otherwise
+1@AviationLoverGEEK444 like $150 but that's cause I bought it off their renewed thingie, normally it's a $200smth monitor, I can't remember the name but it's Asus
+1(I cannot do the T for allat]
@AviationLoverGEEK444 ty, I got it off amazon a year or two ago
@AviationLoverGEEK444 the consequences of my actions
@RB107 hey RB uhh can I have a sprinkle of holy water and some diamonds worth at least 25,000 gp? I uhh, I may have a slight issue
@AviationLoverGEEK444 dw, its for the marksmanship stat
+1@AviationLoverGEEK444
+1Peta is gonna be pissed at me for my actions today
Tuh tih tuuuhhhhhhh.....
TEEEEEEEE
+1"Seconds Ago"
+2@SumateraIndustries I think it's this?
@tonplam356 oh hell yeah, W IT teacher
+1Man I don't wanna live in this future
+1(Teacher cool af)