So I guess that means lifting body's are a thing now... Thank you devs... But I do wonder if Ground Effect (for ekranoplan's and not some wing trickery/building), Plasma Sheath, Frictional heat, and over all fluid dynamics are a thing or if they are not going to be implemented, because I think that that would be great for things if they were implemented. Because if there's one thing I want to do its make a SR-71 that has working Ram Jets (not some BS that activates by reaching Mach 2 then some genius puts the engine on a speed 1000 piston that activates when you start the engine so that the engine starts at 0 IAS, but rather a Ramjet engine that would use aerodynamical calculation to work) and a Fuselage that reaches 600-1000F temperature with plasma/heating effects forming just by flying fast... Another example of this aerodynamical calculation would be in the form of intakes where if you have too little of one, or your AOA is to high then the engine will stall out. Also jet wash, wake turbulence, and vortices would be a great addition.
Hello fellow traveler before decide on the blue salvation button I must give you a warning, and if you heave it, you just might survive... My fellow traveler, this build is cursed, it eliminates any >100k Platinum who builds it from the SPerical Earth some of our greatest warriors such as the prophet Ali MAPA and the grand Black Smither, Psm Zaine... This is my warning to you fellow traveler, while you may be tempted to build onto this plane, if thou decide to build onto it one must only do so with extreme caution by having the Slave Army of Andrewian or to an Alternate Accountable Warrior to do your building deeds, if you will not heave the warnings all you have in store, all a mortal can do, is to delete their account before the end of the lunar week or else the greater evil entity cursing this vehicle will cease control your spiritual realm and cause you to leave the sacred land of the Simple Planes for good.
I was looking at this and just found out a way to reduce parts 4-5 parts for all MAPA's creations... (Here it is) and the reason why this works is because they are meant to form (bend) around a fuselage on a IRL model so that means it can bend around a fuselage in SP to because its drawn out inaccurately for the bending.
@WinsWings Thanks, I'd like to see that... I still have to rate most of your aircraft on your profile though so be prepared, last time I did a massive rating job it was for RealSavageMan and I did about 30 of his planes.
I know how you could make it extremely mobile friendly though... Make the black lines two separate text decals, or if that's not your cup of tea you could use a Vertical Fill Hollow Fuselage to make two lines into one.
@WinsWings Thanks, I will probably not make the challenge, I always to try to encourage against my procrastination, lol... But its the start of school for one, and two the challenge kinda had a short deadline from the start and with 3 days remaining to add the Virtual Reality Augmentation, Weapon bays and Step ladder (don't question why the Step Ladder is its own challenge lol) time is going to be crammed or impossible to find for it.
@Jdbxhxjfjx lol... But jokes aside it was stupid about the only thing that was good about it was the noise it produced, I would say only recently have I got good on stuff like part conserving and labeling to because before I improved on that my builds used to go past 1000 parts...
Congratulations, you did a good job of disgracing the F-35A, granted the F-22 fans already did that and I think that you could have added some pink on it and maybe some lights all over it then 2-8 engines to really disgrace it but it turned out fine in the end...
That is a valid reason to leave, SP2 has a good building system and alot of people have already left for SP2, However that is about the only thing you said that is true this community that is Simpleplanes is one of the best the internet has to offer and of course there are some bad apples but they are the outliers and quite frankly you are starting to remind me of @Blueshift only worse because Blueshift had somewhat of a real problem with people stealing his stuff, where the main problem as far as I can see outside of closed doors, is you, your builds are unique but in a good way and kind of had that World Of Tanks feel to them. In short I just hope you come back, liked your builds and hope to see more.
Na... I'm still sticking around in SP1, I'm here to serve Mobile players... (More importantly I'm going to build SP1 Mobile Builds then port them over in SP2 once Mobile comes out)...
@Dpickle1992 @MetallicBeef6572 Respectfully to both of you two, square wings are bad looking and that's no ones fault besides the Developers, a mistake which they corrected in Simpleplanes 2, but in Simpleplanes 1 when you are trying to make a low part aircraft you do not really have any other option than to use them something that is prominently seen in someone like @MAPA where you have no other choice to use them and the best you can do is use them but make them look acceptable looking.
You nailed the look, the only thing that looks a little off is that the rear engine intakes are not a square on the cell but the shape of the engine cell and there is only 1 exhaust on the VTOL exhaust nozzle not 2 per 4 nozzles also the main front engine cell pods are missing the Jet Engine Diffuser and the main vents above the cockpit are missing the inlet grilles (assuming you based this model off of the Halo Infinite Version)... Other than that everything is spot on and smooth, the screenshots are pretty nice to, here's a version I made a long time ago and it far exceeds it (that's how I know all this stuff)... Over all, Excellent work.
Nice.
Great work.
+1Epic work. Very detailed.
+1Extraordinary work... I'm glad someone finally made it.
Nice
Excellent work, love to see some halo stuff...
+1Nice to see progress on it.
@JessaLeih B-2 ;)
@Rb2h Precisely, we shall not be outdone by FlyOut's radar cross calc...
+2So I guess that means lifting body's are a thing now... Thank you devs... But I do wonder if Ground Effect (for ekranoplan's and not some wing trickery/building), Plasma Sheath, Frictional heat, and over all fluid dynamics are a thing or if they are not going to be implemented, because I think that that would be great for things if they were implemented. Because if there's one thing I want to do its make a SR-71 that has working Ram Jets (not some BS that activates by reaching Mach 2 then some genius puts the engine on a speed 1000 piston that activates when you start the engine so that the engine starts at 0 IAS, but rather a Ramjet engine that would use aerodynamical calculation to work) and a Fuselage that reaches 600-1000F temperature with plasma/heating effects forming just by flying fast... Another example of this aerodynamical calculation would be in the form of intakes where if you have too little of one, or your AOA is to high then the engine will stall out. Also jet wash, wake turbulence, and vortices would be a great addition.
+3Cover photo was taken moments before disaster...
Hello fellow traveler before decide on the blue salvation button I must give you a warning, and if you heave it, you just might survive... My fellow traveler, this build is cursed, it eliminates any >100k Platinum who builds it from the SPerical Earth some of our greatest warriors such as the prophet Ali MAPA and the grand Black Smither, Psm Zaine... This is my warning to you fellow traveler, while you may be tempted to build onto this plane, if thou decide to build onto it one must only do so with extreme caution by having the Slave Army of Andrewian or to an Alternate Accountable Warrior to do your building deeds, if you will not heave the warnings all you have in store, all a mortal can do, is to delete their account before the end of the lunar week or else the greater evil entity cursing this vehicle will cease control your spiritual realm and cause you to leave the sacred land of the Simple Planes for good.
Legendary work.
Epic work
Epic work
Legendary work
lol, I don't know how to feel about this...
I was looking at this and just found out a way to reduce parts 4-5 parts for all MAPA's creations... (Here it is) and the reason why this works is because they are meant to form (bend) around a fuselage on a IRL model so that means it can bend around a fuselage in SP to because its drawn out inaccurately for the bending.
Extraordinary work, looks good and has good detailing too.
Extraordinary work
Epic work, I think this is the most work you put into one creation so far, hopefully this gets more upvotes...
Where it all started...
+1We should all tag so he has no choice but to upvote...
@AndrewGarrison
Excellent work
Legendary work
@WinsWings Thanks, I'd like to see that... I still have to rate most of your aircraft on your profile though so be prepared, last time I did a massive rating job it was for RealSavageMan and I did about 30 of his planes.
+1Excellent work, like the paint job on it.
+1Great work
+1If you haven't done this already... (I can't download it at the moment).
I know how you could make it extremely mobile friendly though... Make the black lines two separate text decals, or if that's not your cup of tea you could use a Vertical Fill Hollow Fuselage to make two lines into one.
Nice, I love to see someone do some good old part conserving...
@WinsWings Thanks, I will probably not make the challenge, I always to try to encourage against my procrastination, lol... But its the start of school for one, and two the challenge kinda had a short deadline from the start and with 3 days remaining to add the Virtual Reality Augmentation, Weapon bays and Step ladder (don't question why the Step Ladder is its own challenge lol) time is going to be crammed or impossible to find for it.
+1@Jdbxhxjfjx lol... But jokes aside it was stupid about the only thing that was good about it was the noise it produced, I would say only recently have I got good on stuff like part conserving and labeling to because before I improved on that my builds used to go past 1000 parts...
@WinsWings Ok thanks for clarifying.
+1@WinsWings Thanks, Cockpit looks nice and smooth on it, almost looks like the MH65.
Congratulations, you did a good job of disgracing the F-35A, granted the F-22 fans already did that and I think that you could have added some pink on it and maybe some lights all over it then 2-8 engines to really disgrace it but it turned out fine in the end...
+2That is a valid reason to leave, SP2 has a good building system and alot of people have already left for SP2, However that is about the only thing you said that is true this community that is Simpleplanes is one of the best the internet has to offer and of course there are some bad apples but they are the outliers and quite frankly you are starting to remind me of @Blueshift only worse because Blueshift had somewhat of a real problem with people stealing his stuff, where the main problem as far as I can see outside of closed doors, is you, your builds are unique but in a good way and kind of had that World Of Tanks feel to them. In short I just hope you come back, liked your builds and hope to see more.
+1Na... I'm still sticking around in SP1, I'm here to serve Mobile players... (More importantly I'm going to build SP1 Mobile Builds then port them over in SP2 once Mobile comes out)...
This is not the entire USAF, this was misadvertised...
+1@Dpickle1992 @MetallicBeef6572 Respectfully to both of you two, square wings are bad looking and that's no ones fault besides the Developers, a mistake which they corrected in Simpleplanes 2, but in Simpleplanes 1 when you are trying to make a low part aircraft you do not really have any other option than to use them something that is prominently seen in someone like @MAPA where you have no other choice to use them and the best you can do is use them but make them look acceptable looking.
+3@Dpickle1992 What's the B-2 image from?
+1Looks like the Dirty Radium Bomb from First Strike...
Excellent work, you did a really good job on making sure that it looks like its supposed to while keeping part count down.
You nailed the look, the only thing that looks a little off is that the rear engine intakes are not a square on the cell but the shape of the engine cell and there is only 1 exhaust on the VTOL exhaust nozzle not 2 per 4 nozzles also the main front engine cell pods are missing the Jet Engine Diffuser and the main vents above the cockpit are missing the inlet grilles (assuming you based this model off of the Halo Infinite Version)... Other than that everything is spot on and smooth, the screenshots are pretty nice to, here's a version I made a long time ago and it far exceeds it (that's how I know all this stuff)... Over all, Excellent work.
Great work
Quite a simple plane
Great work
@BluesynVNA Okay
Great work, exceptional text decals.