@Graingy OMG, I totally understand. It's ridiculous how long it took to get a final answer about my wife after a tick bite. She did get Lyme disease but, the test took nearly a year to get back the results. That is by far the most ridiculous thing I have ever experienced. She was prescribed the antibiotics for it the day she was tested because, she had the classic red ring and she was feeling sick with a fever. It's nuts because, she never goes in the woods, rarely walks anywhere near tall grass. I go in the woods near daily. I also, check myself because, we have a crazy amount of ticks here in Maine. Luckily, I haven't gotten Lyme or any of the other tick borne diseases. The others are worse. Lyme disease killed my dog in 2020.
Listen, you are chatting with someone who has anxiety and severe panic issues. My big trigger is heath problems. Basically, I don't read up on anything when I have any health issues. Not even a cold. Otherwise, I become bedridden for the next 2 weeks trying to fight off a panic attack. Though, one thing always seems to cause me to calm down quite a bit so I can recover from the panic attack and get back to normal. I accept that I can not control what's coming. That I can survive any hardship. That this is merely a test of my strength. Then I force myself out of that bed and start walking, playing loud music, split wood until I am exhausted. I do that kind of thing day after day until that nasty panic cloud leaves.
Don't dwell on whatever it is that is bringing you down. Accept you can't change it. Then stand up (if you can) every day looking to fight that fear face to face. Literally swing you arms, get crazy, SCREAM at the top of your lungs and tell it that you are the one in control.
@winterro I hope you are going to take your talent to Elon. IDK about you but, I love that guy. He is making some serious history and being part of that would be amazing. He is the man that will get us to Mars. I hope that happens before by 2035 or sooner. We really need to make some strides with manned space exploration.
Depression sucks. But, the only cure for it is to live each day and not look at the future. The future is inevitable so live today and nothing more. Eventually this depression will pass like the storm. All dark clouds pass. Until it passes. Try not thinking what comes next. BTW, when you say you ran someone off due to your worrying. Do you mean due to your jealousy or due to actual worrying. Such as anxiety concerns? Because, jealously is an ugly beast and will drive off anyone.
@Vincent
I would think a 3D printed propeller would shred at high RPM's. Though, through some trial and error you may get it to work. Just keep messing with the infill pattern. I would think cubic subdivision would provide the best strength for all the forces. With the nozzle output set to the smallest you can go and don't do a solid fill but, set it to something like 90%. To give it strength and rigidity while still allowing flex. Maybe even bump it down to 80%.
I haven't touched my 3D printer in a year. I've just been too busy to sit there and calibrate it. Ends up taking hours and then I never seem to get it perfect across the entire bed. I have the Anycubic Chiron. Big BED so harder to get it to be perfectly even. It's so called automatic leveling is far from automatic or a leveling device.
Beautiful 3D print!
What printer do you have?
@human2019
Thanks. I would love a big 70HP Kubota like my neighbor bought last year but, I don't need one for what I do. He does landscaping and tree removal. Actually, it's nice to have him for a neighbor. He brings me free tree length firewood from the jobs he does. Just unloaded about a cord of Fir trees last week. IDC if it's fir, it burns hot and the coals last. Many areas of the world burn Fir since the world isn't filled with hardwoods.
The cab and chair movement really gives that authentic feel. I have a MUCH smaller tractor but, have used lots of larger ones. So, it's much appreciated you added those features.
HERE is a link to my tractor build of the tractor I actually own.
@StephenLynch It should say "Joining Room 0" then "Joined Room 0".
If it doesn't and you're using the Japan Server. Then follow the same steps we always do for technical issues. Reboot, Restart, Reinstall, Turn all mods off and then turn on only one (MP of course) and test. Then you can turn on each mod one by one to see if there is a conflict.
Also, double check the IP you are using. Delete the old one and re-enter it. NO COPY PASTE BS.
@Bobyo Yes, I deleted it. I didn't want to draw any attention to any negative comments based on politics. I am well aware wars are based in politics. Though, I think you all see my point here. I just wanted to share an allegiance with the Ukrainians not based on anyone'sa political affiliation. I think we all have had enough politics for one lifetime here in the USA. It's spread itself all over the world. We all would be better off without politics and to go back to our normal lives where we didn't care who was running for the office of popularity.
@Almostbutnotquite Well, now I know there is someone out there in the MOD world who is against some of us. It's interesting how my "Andrew" didn't have any successors but, another very similar "Andrew" TEXT build had 7 successors very quickly. HERE
@BeanMaster69 I just joined the Japan server. So, it's up and working. 8:53 EST.
As for the others, if you get "Failed to Connect" it means the server is down.
@winterro I live in the best timezone. Eastern Standard Time or GMT-5. LOL
I know everyone lives all over. Though, I do see most on at that time. Yesterday I think it was. There were the most I had seen at once ever on the Japan server.
@tucan AHHHHHHHHHHHHHHHHH!!!!!!!! THANK YOU!!! I totally get it now. That one went straight STEALTH over my head.
Now, I am laughing big time. I was like that as a white user too, I still am when new parts are added🤣🤣🤣🤣🤣
@tucan If it's not about race then please enlighten me as to what it's about. If it's some Anime inside joke then I won't get it. That crap is the worst form of entertainment.
@EliCandyYT69
I do feel guilty. I check SP daily for new builds. A few days after I posted, I saw tons. I felt bad. Then again, I felt like I started our very own Rick Astley meme and then really felt bad. :)
@Getnoobed14162 Read the description please. The program that was created by hpgbproductions ONLY works on Windows. I provided links for everyone to easily find everything they need to make their own creations.
@hpgbproductions Oh Geez. I'm sorry. I didn't know that's what to look for on GITHUB. I swear websites like that need a popup which explains how to read and use their website.
Here is an updated XML edit to prevent the parts from damage. Just copy, then next to where it shows how many downloads have happened. Click on the down arrow button. Choose update XML. Then Paste the Copy and save.
Some parts are getting damaged in flight. IDK which parts are hitting each other but, when SP said PARTS DAMAGED it didn't seem to effect the airplanes flight at all. I believe it's the ailerons.
@DieLoaf I didn't just spend 10 years working on it. I actually grew up around the P-3 my whole life. My father spent 23 out of 30 years working on P-3's while he served in the Navy. Hope that boosts your happiness too. :)
As a former P-3 gas turbine mechanic for 10 years I can say this is a beautiful recreation. P-3's come in so many variations. Don't listen to the ones who are saying it's missing some details. Those details aren't necessary considering to reach most of the details on such a large aircraft would easily reach a 5,000 part count. As for the CoM, CoL, CoT. That's an easy fix. Lower the weight and drag of the weapons. If someone wants to they can do it themselves. Or you redo it and update the XML file.
Thank you for honoring this amazing aircraft with your artistic building skills. My favorite part was when I lowered the flaps at a high speed and they ripped off LOL.
Hey WNP78, I have tried a few variations to images I have chosen to test. I always seem to get some astronomical part count output like 571,746. Do you have any tips to make sure this doesn't occur?
@Graingy OMG, I totally understand. It's ridiculous how long it took to get a final answer about my wife after a tick bite. She did get Lyme disease but, the test took nearly a year to get back the results. That is by far the most ridiculous thing I have ever experienced. She was prescribed the antibiotics for it the day she was tested because, she had the classic red ring and she was feeling sick with a fever. It's nuts because, she never goes in the woods, rarely walks anywhere near tall grass. I go in the woods near daily. I also, check myself because, we have a crazy amount of ticks here in Maine. Luckily, I haven't gotten Lyme or any of the other tick borne diseases. The others are worse. Lyme disease killed my dog in 2020.
Listen, you are chatting with someone who has anxiety and severe panic issues. My big trigger is heath problems. Basically, I don't read up on anything when I have any health issues. Not even a cold. Otherwise, I become bedridden for the next 2 weeks trying to fight off a panic attack. Though, one thing always seems to cause me to calm down quite a bit so I can recover from the panic attack and get back to normal. I accept that I can not control what's coming. That I can survive any hardship. That this is merely a test of my strength. Then I force myself out of that bed and start walking, playing loud music, split wood until I am exhausted. I do that kind of thing day after day until that nasty panic cloud leaves.
Don't dwell on whatever it is that is bringing you down. Accept you can't change it. Then stand up (if you can) every day looking to fight that fear face to face. Literally swing you arms, get crazy, SCREAM at the top of your lungs and tell it that you are the one in control.
@winterro I hope you are going to take your talent to Elon. IDK about you but, I love that guy. He is making some serious history and being part of that would be amazing. He is the man that will get us to Mars. I hope that happens before by 2035 or sooner. We really need to make some strides with manned space exploration.
@UnmanagedReservoir
Please share your PC specs?
@AppyPappy
NARC 🤣🤣🤣
@mistrain Thank You
@klm747klm747 can't, as I said my comment was removed.
Remove my comment, I remove my upvote. Cancel Culture Communist
@UmbrellaCorporation Sorry, no.
Alright, where did you get the wood bub? lol
Depression sucks. But, the only cure for it is to live each day and not look at the future. The future is inevitable so live today and nothing more. Eventually this depression will pass like the storm. All dark clouds pass. Until it passes. Try not thinking what comes next. BTW, when you say you ran someone off due to your worrying. Do you mean due to your jealousy or due to actual worrying. Such as anxiety concerns? Because, jealously is an ugly beast and will drive off anyone.
Thanks for posting this. I was wondering of the mod was worth the hassle of downloading. Looks great
@Leahh Well said
There is a STAR TREK tag you can add for your tags
I wish I could upvote 1000 times
@se34ruy New and Old Japanese Server is down. Any idea why?
@SyntheticL Looks like that Chinese server is DOWN
If it was a Texan truck, where are the oversized truck tires? lol
@Vincent
I would think a 3D printed propeller would shred at high RPM's. Though, through some trial and error you may get it to work. Just keep messing with the infill pattern. I would think cubic subdivision would provide the best strength for all the forces. With the nozzle output set to the smallest you can go and don't do a solid fill but, set it to something like 90%. To give it strength and rigidity while still allowing flex. Maybe even bump it down to 80%.
I haven't touched my 3D printer in a year. I've just been too busy to sit there and calibrate it. Ends up taking hours and then I never seem to get it perfect across the entire bed. I have the Anycubic Chiron. Big BED so harder to get it to be perfectly even. It's so called automatic leveling is far from automatic or a leveling device.
Beautiful 3D print!
What printer do you have?
@human2019
Thanks. I would love a big 70HP Kubota like my neighbor bought last year but, I don't need one for what I do. He does landscaping and tree removal. Actually, it's nice to have him for a neighbor. He brings me free tree length firewood from the jobs he does. Just unloaded about a cord of Fir trees last week. IDC if it's fir, it burns hot and the coals last. Many areas of the world burn Fir since the world isn't filled with hardwoods.
The cab and chair movement really gives that authentic feel. I have a MUCH smaller tractor but, have used lots of larger ones. So, it's much appreciated you added those features.
HERE is a link to my tractor build of the tractor I actually own.
@StephenLynch It should say "Joining Room 0" then "Joined Room 0".
If it doesn't and you're using the Japan Server. Then follow the same steps we always do for technical issues. Reboot, Restart, Reinstall, Turn all mods off and then turn on only one (MP of course) and test. Then you can turn on each mod one by one to see if there is a conflict.
Also, double check the IP you are using. Delete the old one and re-enter it. NO COPY PASTE BS.
@Korzalerke @FeatherWing
So, we should ban all FLAGS.
The post was a flag of the Ukraine. Get bent
@Zippy6 Takes one to know one doesn't it 😉
@Bobyo Yes, I deleted it. I didn't want to draw any attention to any negative comments based on politics. I am well aware wars are based in politics. Though, I think you all see my point here. I just wanted to share an allegiance with the Ukrainians not based on anyone'sa political affiliation. I think we all have had enough politics for one lifetime here in the USA. It's spread itself all over the world. We all would be better off without politics and to go back to our normal lives where we didn't care who was running for the office of popularity.
That's a big boy
@Almostbutnotquite Well, now I know there is someone out there in the MOD world who is against some of us. It's interesting how my "Andrew" didn't have any successors but, another very similar "Andrew" TEXT build had 7 successors very quickly.
HERE
31
@BeanMaster69 I just joined the Japan server. So, it's up and working. 8:53 EST.
As for the others, if you get "Failed to Connect" it means the server is down.
@winterro I live in the best timezone. Eastern Standard Time or GMT-5. LOL
I know everyone lives all over. Though, I do see most on at that time. Yesterday I think it was. There were the most I had seen at once ever on the Japan server.
@Ubyk123 yes
@ThunderFang17 usually after 5 EST there are people on. But, try anytime.
@tucan AHHHHHHHHHHHHHHHHH!!!!!!!! THANK YOU!!! I totally get it now. That one went straight STEALTH over my head.
Now, I am laughing big time. I was like that as a white user too, I still am when new parts are added🤣🤣🤣🤣🤣
@tucan ???
@tucan If it's not about race then please enlighten me as to what it's about. If it's some Anime inside joke then I won't get it. That crap is the worst form of entertainment.
@Thomasthemaker4
Read the description.
@EliCandyYT69
I do feel guilty. I check SP daily for new builds. A few days after I posted, I saw tons. I felt bad. Then again, I felt like I started our very own Rick Astley meme and then really felt bad. :)
@ACGspOfficial Thanks
I wonder if anyone knows if the actual Dassault Mirage flies like a bowl of soup. Cause, this thing does. Otherwise it's a beautiful build.
Everyone should try something I did on accident. Take a nose dive and then when in a deep dive, choose Activate 1. It's really cool.
@hpgbproductions Ooooooooh. Gotcha now. Sarcastic humor is hard to read online. You have created an amazing tool.
@Getnoobed14162 Read the description please. The program that was created by hpgbproductions ONLY works on Windows. I provided links for everyone to easily find everything they need to make their own creations.
@hpgbproductions Oh Geez. I'm sorry. I didn't know that's what to look for on GITHUB. I swear websites like that need a popup which explains how to read and use their website.
Why can't anyone ever go that extra step and just package something like this into an executable package? 🙄
@HorizonHitingxt Thanks!
Here is an updated XML edit to prevent the parts from damage. Just copy, then next to where it shows how many downloads have happened. Click on the down arrow button. Choose update XML. Then Paste the Copy and save.
Some parts are getting damaged in flight. IDK which parts are hitting each other but, when SP said PARTS DAMAGED it didn't seem to effect the airplanes flight at all. I believe it's the ailerons.
Click here to see what my Discrete Mathematics class was like back in College
@DieLoaf I didn't just spend 10 years working on it. I actually grew up around the P-3 my whole life. My father spent 23 out of 30 years working on P-3's while he served in the Navy. Hope that boosts your happiness too. :)
As a former P-3 gas turbine mechanic for 10 years I can say this is a beautiful recreation. P-3's come in so many variations. Don't listen to the ones who are saying it's missing some details. Those details aren't necessary considering to reach most of the details on such a large aircraft would easily reach a 5,000 part count. As for the CoM, CoL, CoT. That's an easy fix. Lower the weight and drag of the weapons. If someone wants to they can do it themselves. Or you redo it and update the XML file.
Thank you for honoring this amazing aircraft with your artistic building skills. My favorite part was when I lowered the flaps at a high speed and they ripped off LOL.
Hey WNP78, I have tried a few variations to images I have chosen to test. I always seem to get some astronomical part count output like 571,746. Do you have any tips to make sure this doesn't occur?