@TTL i was planning to buy a HP's Gaming laptop from Internet, but my mom forced me not to do that. But she said it is fine to buy from samsung, so i wouldn't be able get any other brand's laptop 😅
@126 i wish so. but my network service recently got ultra super extremely slower. While even a downloading a single light sized file is very slow, i couldn't even hope to try an multiplayer...
@126 oh.. ik, but the reason how it happened is because how i tagging the people on every post is using a word-binded text shortcut (samsung's built-in feature) to do that. I'll edit that the text shortcut later anyways ✔️
@126 of course. I'll accept the ai request. But later. I'm planning to make something like "official Ai request center (™)" thing. So i don't have to confused with other notifications.. XD
@126
I'm sure it's all because i changed the method of how i make the fenders.
My previous cars' fenders were made in the way like this. Place the hollow fuselage as same as wheel's direction.
Good thing in this method is, Requires very fewer part to make a fender.
But the minus is, hasn't much capable to make more accurate shape. And even it causes an texture glitch when you shorten its length way too much. (This thing happened very often, and it's even make me want to give the whole project up 💀)
And.. since i was making lightning mcqueen, i decided to change the method how i make the fenders.
It is looking like this.
Place the fuselage to facing forward, Instead of placing the fuselage as same as wheel's direction.
Minus thing is, there's no way to find efficient in this method.
But the Plus is, giving the modeler a capable of replicate more accurate shape without worrying of texture glitches or anything.
Oh or maybe because my code didn't find the "variable output" such as SS_R , SS_LWRPM_R and WRPM_L from two rear wheels. Try to give these names to each correct one at the variable output of each two rear wheels first, and then try to copy the codes to your car.
(I'm not sure am english'ing right, especially when it goes complicate like this..)
Instead copying all the variables one by one youself, what about to copy all the variables from here to there at onece? But ofcourse, you have to make a backup before you doing this kind of action.
@LunarEclipseSP yes, very much. :D
But while GT-R has interior without over 1000 part count, this R8 one is already over thousands of part count without interior. So i'm not sure am i'll be able to make the interior.
I'm, uh, kinda.. yes. But since that one of mine is too outdated, what about to take a look at this one instead? It's a bit newer, and has better modelings
@dyHU
Have you ever noticed/tried to activate my built-in function "CompatibleMode"? It's preventing the gear system from causing problem on low physics.
@QuebecorMotorCompany
every configuration between the version With Ai and without is exactly same (except 3 parts that were removed. Camera, Joystick base, label. These are only needed for human).
@L3FT2R1GHT also, the way i find this, i recently have to apply my Ai on the police car modified by the guy who named SPTuner. And i just spotted that his car has modified with the function that making a lot of smoke, and i was able to find this link from his original description.
@DatFiat126Fan19 Oh Did you find it? XD
And yes, it is the car i'll upload it some later, but don't expect too much, because it's just modifications on my previous simple hyper
And Don't worry, i've already got you on my auto tag list!
Introducing Apple i-Pie
+1@SPTNR btw, it's AWD.. are u sure u want me to make it a drift simulator?
+1Very relateable
+1A/T 3 @intruder72 @Zhixunlin23 @001
+1A/T 3 @intruder72 @Zhixunlin23 @001
+1@ThatRandomCouchPotato 1899 parts 💀
+1@TTL i was planning to buy a HP's Gaming laptop from Internet, but my mom forced me not to do that. But she said it is fine to buy from samsung, so i wouldn't be able get any other brand's laptop 😅
+1@126 i wish so. but my network service recently got ultra super extremely slower. While even a downloading a single light sized file is very slow, i couldn't even hope to try an multiplayer...
+1@126 Yes, a PC. Actually, it's a laptop. A budget one from samsung.
+1A/T 3 @intruder72 @Zhixunlin23 @001
+1A/T 3 @intruder72 @Zhixunlin23 @001
+1@126 oh sht!1! Definitely my mistake
+1Oh by the way, this huracan is also shares same platform & engine as Audi R8
+1A/T 3 @intruder72 @Zhixunlin23 @001
+1Pov: You've used a lot of your tickets and you finally see a truck appears🎉
+1@126 oh.. ik, but the reason how it happened is because how i tagging the people on every post is using a word-binded text shortcut (samsung's built-in feature) to do that. I'll edit that the text shortcut later anyways ✔️
+1@ThatRandomCouchPotato sorry, i haven't ever built a car with someone's request
+1Surprisingly well done!
+1@SimpleCreate i'm building an R8 but it's way too much part counts 📈📈
+1@126 of course. I'll accept the ai request. But later. I'm planning to make something like "official Ai request center (™)" thing. So i don't have to confused with other notifications.. XD
+1@126
+1I'm sure it's all because i changed the method of how i make the fenders.
My previous cars' fenders were made in the way like this. Place the hollow fuselage as same as wheel's direction.
Good thing in this method is, Requires very fewer part to make a fender.
But the minus is, hasn't much capable to make more accurate shape. And even it causes an texture glitch when you shorten its length way too much. (This thing happened very often, and it's even make me want to give the whole project up 💀)
And.. since i was making lightning mcqueen, i decided to change the method how i make the fenders.
It is looking like this.
Place the fuselage to facing forward, Instead of placing the fuselage as same as wheel's direction.
Minus thing is, there's no way to find efficient in this method.
But the Plus is, giving the modeler a capable of replicate more accurate shape without worrying of texture glitches or anything.
Oh or maybe because my code didn't find the "variable output" such as
+1SS_R,SS_LWRPM_RandWRPM_Lfrom two rear wheels. Try to give these names to each correct one at the variable output of each two rear wheels first, and then try to copy the codes to your car.(I'm not sure am english'ing right, especially when it goes complicate like this..)
Instead copying all the variables one by one youself, what about to copy all the variables from here to there at onece? But ofcourse, you have to make a backup before you doing this kind of action.
+1The Power of Agera is 💪💪💪
+1@LunarEclipseSP yes, very much. :D
+1But while GT-R has interior without over 1000 part count, this R8 one is already over thousands of part count without interior. So i'm not sure am i'll be able to make the interior.
I'm, uh, kinda.. yes. But since that one of mine is too outdated, what about to take a look at this one instead? It's a bit newer, and has better modelings
+1@SamTheUncle
+1This is nice.
+1@dyHU as you can check it out from my profile, i'm from south korea :D
+1Reminds me a Clutch plate??
+1@dyHU
+1Have you ever noticed/tried to activate my built-in function "CompatibleMode"? It's preventing the gear system from causing problem on low physics.
@QuebecorMotorCompany
+1every configuration between the version With Ai and without is exactly same (except 3 parts that were removed. Camera, Joystick base, label. These are only needed for human).
Gaming mouse?
+1No, the Racing Mouse!!
@Majakalona yeah 🌊🌊🌊
+1Idk why it does, but this car reminds me Assetto corsa 🏎
+1@ConvoyPerson
+1Kinda arcade'ish, because the car it self is real quick and has very light weight. You can get it on here anyway
@Zhixunlin23 Exactly. 😄 nice to meet you
+12
+1@Lwillswith2sentryguns not actually "This" one here, but i'll upload Ai controlled one soon later
+1T @BadahhMuscleCar001
+1A/T 3 @intruder72 @Zhixunlin23
+1A/T 2 @TheMouse @RealMicroZackSP @TheSPTuner
+1A/T 1 @MAPA @DatFiat126Fan9 @Lwillswith2sentryguns
+1@L3FT2R1GHT also, the way i find this, i recently have to apply my Ai on the police car modified by the guy who named SPTuner. And i just spotted that his car has modified with the function that making a lot of smoke, and i was able to find this link from his original description.
+1@L3FT2R1GHT
+1Here
@Majakalona toaster?? Lol My Samsung phone is literally just Torbjörn's ult skill (Molten Core!!!!)
+1❌️📦
+1↓↓ OMG HOW THE DEAD ACCOUNT COMMENTING!?!??!?
+1@DatFiat126Fan19 Oh Did you find it? XD
+1And yes, it is the car i'll upload it some later, but don't expect too much, because it's just modifications on my previous simple hyper
And Don't worry, i've already got you on my auto tag list!
ØHhh!!1! NEW!!!!!!
+1