@Texasfam04
Thanks for voting! Originally the XF-0002 was my gold build but I also wanted to do a replica of my friend's plane and I thought a transformer jet would be cool. I think I'll do the XF-0002 as my gold build, and I'll just do the Murphy Rebel replica as a side project. Not 100% sure if the transformer jet will happen, but it would be pretty epic.
There's a special reason why I'm even considering building the XF-0002 in SimplePlanes, and I'll unveil that reason when I finish and upload it.
@marcox43
I could try that with the hinge rotators. But without the gyro, it isn't the car's downforce that's the problem, the AI simply keeps veering left off the track at the start off the race.
@marcox43
I've done that before. I added a 100% custom suspension on the landing gear of my WIP fighter, but I have dampers maxed out on the tires and suspension set at 100% for the Blue Hound. Also, originally I had the 2 front tires steering only but I made all 4's steerable so it can cut the corners with the gyro. I'll probably make a more realistic Blue Hound after the race, with good detail like my planes. I mean I tried various wing and downforce techniques but the AI just keeps swerving my car off the track. I tried various angles at which the tires are allowed to turn at, but still, the AI keeps vering left off the road. I've tried almost everything without using the gyro. I mean, it wasn't really the car much, but just the stupid AI. Over and over it did the same thing: veer left off the track and flip over. If I could get the car to drive fine without the gyro I would but the AI is just really frustrating to me.
@marcox43
Nice! I tried going realistic with the Blue Hound by adding fins/wings, nudged tires, a 2nd engine, etc. but the AI just keeps swerving unless it has a gyro.
@marcox43
Well I had to put a gyro, because without it, the AI wont even make it past the first gate without swerving off the road and flipping over repeatedly. I tried everything, from nudging a whole other set of tires in with the normally placed tires, 2 engines, wings, but the AI just kept swerving at the start of the race. -_- I mean it's a pretty low-lying car, very fast, and the tires are maxed out on grip/traction, but the AI just kept swerving and flips the car once it goes of the track. That's why I put a gyro. And I assume this is your BMW?
@Jetpackturtle
Eh I've been pretty busy with school, but the new fighter I'm working on has been delayed a couple of times and as a result I'm going on to one month since my last official high quality build. Usually it takes me about a week or two for a high quality build. So I have actually been on SimplePlanes a lot, it's just I haven't uploaded my usual designs in awhile.
@marcox43
Nice! Are you using a gyro? Gyros can help your car in keeping stable and make tight turns. Here's my racer. This is my first car tournament.
I'm thinking of making a factory/assembly line/plant that produces my airplanes. I'll also probably make my HQ and I could make a terminal and control tower for wright airport.................................................................if I had time to do all of this... :(
Too bad Boeing didn't mass produce this. I think there is only one left in existence that is in flying condition.
It's based on the Su-33, but it's a major improvement.
Make another set of instruments that you can place in the cockpit, except they are analogue/dials/gauges (if it's possible).
@zap210
Thanks for the upvote!
@chancey21
Thought so.
Wonderful SST!
@InternationalAircraftCompany
No problem she's a beauty!
Let me guess you set the time between bursts at an infinite number?
@ZeDaru57
No problem!
Your arcade games are fantastic!
+1The Maverick was my first and favorite Nerf gun. It's pretty good.
@JonorBX
Lol
Wow. SP has come a LOOOOOOOONG way.
+1If I have some off-time I may recreate one of my older biplane designs.
Damn you've been through a lot. Glad to see your back!
Wow. Just wow this is incredible, especially the green leaf emblem!
@marcox43
Still looks epic though! Can't wait to see it race!
Two Words: SAM CITY
Those freaking SAMS are nuts!
Also how do you make these missions? I'd love to make WW2 style missions that follow a campaign.
+4Who needs an R/C Simulator when you got this!
@WeSeekANARCHY
+1Yea Maywar is pretty laggy. Also here is the fixed gyro version that I'll be racing (gyro has no activation groups)
Looks a lot like an F-86D Saber Dog. When I first saw the G.91 I thought it was an Italian copy/version of the F-86.
+1@Texasfam04
No problem this is very cool!
@Texasfam04
Thanks for voting! Originally the XF-0002 was my gold build but I also wanted to do a replica of my friend's plane and I thought a transformer jet would be cool. I think I'll do the XF-0002 as my gold build, and I'll just do the Murphy Rebel replica as a side project. Not 100% sure if the transformer jet will happen, but it would be pretty epic.
There's a special reason why I'm even considering building the XF-0002 in SimplePlanes, and I'll unveil that reason when I finish and upload it.
@Texasfam04
It sucks mobile users don't have Maywar on their maps. Also thanks for the compliment!
@Texasfam04
Thanks for the upvote!
What a classic of an airplane!
+1I kid you not, at first glance I thought that was an actually photo from WW2! 😂
+2@marcox43
I could try that with the hinge rotators. But without the gyro, it isn't the car's downforce that's the problem, the AI simply keeps veering left off the track at the start off the race.
@marcox43
I've done that before. I added a 100% custom suspension on the landing gear of my WIP fighter, but I have dampers maxed out on the tires and suspension set at 100% for the Blue Hound. Also, originally I had the 2 front tires steering only but I made all 4's steerable so it can cut the corners with the gyro. I'll probably make a more realistic Blue Hound after the race, with good detail like my planes. I mean I tried various wing and downforce techniques but the AI just keeps swerving my car off the track. I tried various angles at which the tires are allowed to turn at, but still, the AI keeps vering left off the road. I've tried almost everything without using the gyro. I mean, it wasn't really the car much, but just the stupid AI. Over and over it did the same thing: veer left off the track and flip over. If I could get the car to drive fine without the gyro I would but the AI is just really frustrating to me.
@marcox43
Nice! I tried going realistic with the Blue Hound by adding fins/wings, nudged tires, a 2nd engine, etc. but the AI just keeps swerving unless it has a gyro.
@marcox43
@SkylineAero
Thanks!
Also,
@Tully2001
@SledDriver
@Jetpackturtle
Thanks!
@marcox43
Well I had to put a gyro, because without it, the AI wont even make it past the first gate without swerving off the road and flipping over repeatedly. I tried everything, from nudging a whole other set of tires in with the normally placed tires, 2 engines, wings, but the AI just kept swerving at the start of the race. -_- I mean it's a pretty low-lying car, very fast, and the tires are maxed out on grip/traction, but the AI just kept swerving and flips the car once it goes of the track. That's why I put a gyro. And I assume this is your BMW?
@Jetpackturtle
Eh I've been pretty busy with school, but the new fighter I'm working on has been delayed a couple of times and as a result I'm going on to one month since my last official high quality build. Usually it takes me about a week or two for a high quality build. So I have actually been on SimplePlanes a lot, it's just I haven't uploaded my usual designs in awhile.
@Jetpackturtle
Ah so.....that means I can't use a gyro?? This racer from the last tournament had a gyro.
@marcox43
Nice! Are you using a gyro? Gyros can help your car in keeping stable and make tight turns. Here's my racer. This is my first car tournament.
Mostly Normal Christmas Gift
I got down to 1:21 without missing a ring.
I'll probably enter this race, it would be my first car race.
@PlanesAndThings2
Thanks!
2 people that's it?
Congrats Tully!
No problem!
+1@SkylineAero
No problem!
@SkylineAero
Thanks for upvoting such an old design of mine!
@MethaManAircraft
Thanks!
The 777x in a nutshell: A giant glider with 2 powerful and efficient engines. AKA: The A380 slayer and the 747 successor!
Nice job!
FINALLY someone made a good F/A-27C (or something like it) in SimplePlanes! Thanks!
It's a Cessna 310B just FYI. I have an uncle that has one, a 310 A model.
I'm thinking of making a factory/assembly line/plant that produces my airplanes. I'll also probably make my HQ and I could make a terminal and control tower for wright airport.................................................................if I had time to do all of this... :(