@BMilan reload time is edited to twenty five seconds on the gun that fires first, and close to zero on all other guns, so that all of the gun fire in rapid succession and then the first one takes a bit of time to fire again. I have left a bit of delay between guns as each is individually operated in real life and not all gunners have the same reaction time.
Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Interior looks very nice, and exterior is very detailed, but performance are not so good. Vehicle has way too much power, and throttle input for going forward is bad because it doesn't allow reverse.
Try putting horizontal stabilizers on rotators and adjusting their max angle to adjust pitch. Stock control surfaces are no good here, and too much deflection stalls elevators. Also, you don't need two sets of ailerons. Make one larger set closer to wingtips.
It looks great, but is a bit boring to drive. You should have allowed CoM to stay higher so we have to be at least a bit careful not to roll it over, and speed should have been limited to whatever the max speed of these was. You can do that by editing maxAngularVelocity property of wheels. That property shows up when you assign a wheel to an engine.
@X4JB you have accused me of only helping others to feed my ego. That is quite an insult. I have spent years helping to improve the community I love and to which I have dedicated most of my spare time. I was explaining that I have more than enough things to brag about if I want to, and that that's not what I'm working for.
@X4JB buddy, I'm a moderator and fifth highest rated user in the community. I have hosted the most successful challenge ever, I'm a member of SPMC almost since I started playing, reached platinum in just over three months, invented a prop that works under water... I don't need any more bragging rights, I've got plenty. Now, I'm just helping other guys get better at this game if they want to.
@Flash0of0green none. Two use lockback system, one uses frame lock and needed some thightening of the very poorly made axle (it's held by a screw). I didn't do the kind of chopping guys in YouTube videos do though. These are two 8cm pocket knives and a 20cm large folder. I did some playing with the big one, though not a lot, while the smaller ones are my everyday carry knives. My current one, lockback with wood and brass handle, is quite dirable and well fitted. Its steel is a bit soft, or so it seemed when I was remaking the blade, but I only paid some $5 for it and for that price range, it is incredible.
@Flash0of0green my folders never had any problem with some light chopping. They're chinese made cheap knives, though I redid blade geometry with some grinding and polishing. regardless, you need at least 85mm of handle (optimally at least 100) for a comfortable grip, and a blade for useable pocket knife doesn't need to be longer than 85mm. A knife with your mechanism would be a nice novelty, but it wouldn't surpass simpler designs in practicality.
Your post has been removed for excess profanity. Also, look on the bright side. I've made sure to not have a girlfriend on Valentine's. I've saved money on gifts and expensive dinners, and I'll treat myself to a few beers with a bunch of friends tonight.
@Datom activation group. Connect the custom missile body to the build via detacher that doesn't have a stock missile on the other end and activate it when all stock missiles have fired.
@P0TET0Z I'm glad you do :)
@CrashFighter05 @Tang0five thanks.
@BMilan no problem.
@Zanedavid :)
@BMilan reload time is edited to twenty five seconds on the gun that fires first, and close to zero on all other guns, so that all of the gun fire in rapid succession and then the first one takes a bit of time to fire again. I have left a bit of delay between guns as each is individually operated in real life and not all gunners have the same reaction time.
@Mustang51 thank you :)
+1@ChiChiWerx thanks man. I'm glad you like it.
@Skyler717 thank you :)
@Skyler717 until I post another build.
@ploptro7 @BuiltBionixInd10 thanks :)
@PointlessWhyshouldi I had to reupload as it wasn't a successor to the challenge.
Nice mushroom. That build is gonna be the best slice of pizza on the site :)
+4@Minecraftpoweer it was about a forums tag. This one is for builds tag.
@jamesPLANESii
@thecrusader good call.
You should have used structural wings and control surfaces on hinge rotators. It would have allowed you to have part of the roundel move with aileron.
+1@spefyjerbf of course you can. Dunno why they won't show though.
+1@Subnerdica thanks man.
:)
+1Your post has been removed. Please read these rules about posting planes.
Please try to make major changes to a plane before posting it. Simply painting an object a different color, or adding a few guns is not enough to consider it your own. In the future please credit the original maker, and try to post your own work.
Will you people give up already? Your post has been removed as spam.
Interior looks very nice, and exterior is very detailed, but performance are not so good. Vehicle has way too much power, and throttle input for going forward is bad because it doesn't allow reverse.
@WorldofWarships no problem.
You should have made bottom of the hull circular. Other than that, nice boat.
Congratulations on silver :)
+2I don't think they fly on any side of the road.
+16Try putting horizontal stabilizers on rotators and adjusting their max angle to adjust pitch. Stock control surfaces are no good here, and too much deflection stalls elevators. Also, you don't need two sets of ailerons. Make one larger set closer to wingtips.
@FCparis it takes persistence and constant improving to get anywhere these days. It was a lot easier when I was new.
@Skyler717 207k.
+2@rickyho188 anytime. If you need anything else, feel free to ask.
It looks great, but is a bit boring to drive. You should have allowed CoM to stay higher so we have to be at least a bit careful not to roll it over, and speed should have been limited to whatever the max speed of these was. You can do that by editing
+1maxAngularVelocityproperty of wheels. That property shows up when you assign a wheel to an engine.@FCparis it's nothing special really. I don't post for points, I'm more into nice comments.
@FCparis I'm glad you like it :)
Nice work.
@X4JB sorry for the misunderstanding then :)
+1Your post has been removed for being too far off-topic and for potential for starting toxic arguments.
@X4JB you have accused me of only helping others to feed my ego. That is quite an insult. I have spent years helping to improve the community I love and to which I have dedicated most of my spare time. I was explaining that I have more than enough things to brag about if I want to, and that that's not what I'm working for.
@X4JB buddy, I'm a moderator and fifth highest rated user in the community. I have hosted the most successful challenge ever, I'm a member of SPMC almost since I started playing, reached platinum in just over three months, invented a prop that works under water... I don't need any more bragging rights, I've got plenty. Now, I'm just helping other guys get better at this game if they want to.
@Cobrahuey no problem.
@Cobrahuey nope, it's different enough.
@P0TET0Z one more. This is your first, second is also free, third brings temp ban, fourth a longer temp ban, fifth usually seals your fate.
+1Congratulations, your logo is so close to the real thing that Google recognised it. You won a strike for NSFW material.
+1- mods never sleep;
- you have said that this logo is questionable yourself, so I removed it unil we clarify what it's for.
+1@jamesPLANESii it takes less than two seconds. It wouldn't take you less to take a new part from the list every time.
@Flash0of0green none. Two use lockback system, one uses frame lock and needed some thightening of the very poorly made axle (it's held by a screw). I didn't do the kind of chopping guys in YouTube videos do though. These are two 8cm pocket knives and a 20cm large folder. I did some playing with the big one, though not a lot, while the smaller ones are my everyday carry knives. My current one, lockback with wood and brass handle, is quite dirable and well fitted. Its steel is a bit soft, or so it seemed when I was remaking the blade, but I only paid some $5 for it and for that price range, it is incredible.
@Flash0of0green my folders never had any problem with some light chopping. They're chinese made cheap knives, though I redid blade geometry with some grinding and polishing. regardless, you need at least 85mm of handle (optimally at least 100) for a comfortable grip, and a blade for useable pocket knife doesn't need to be longer than 85mm. A knife with your mechanism would be a nice novelty, but it wouldn't surpass simpler designs in practicality.
+1Your post has been removed for excess profanity. Also, look on the bright side. I've made sure to not have a girlfriend on Valentine's. I've saved money on gifts and expensive dinners, and I'll treat myself to a few beers with a bunch of friends tonight.
@Datom no problem.
Your post has been removed as it calls for political discussion.
@Flash0of0green extra length allow you to grip it further from the center of mass, allowing you to chop with it.
@Datom activation group. Connect the custom missile body to the build via detacher that doesn't have a stock missile on the other end and activate it when all stock missiles have fired.