@SpearSystems A 737 A320 sized fuelslage approximately 40m in length with a spacious width and height whilst maintaining a similar size to the above aircraft it’s designed as a 737 narrow body competitor
https://www.simpleplanes.com/a/8UM3NR/Eastern-International-EI-200-7-NG-CEO
Link to the Current Engine option non NEO as for some reason it’s auto crediting last gens model
@SpearSystems a job well done 👍an amazing job on the airframe @SpearSystems the RG-400 has now been released we’d be more than happy to supply engines for your builds in the future if needed thanks again - EAC
@SpearSystems Do you think you can help me out I’m working on a -400 for the punningham RG series it’s a narrow body regional airliner could you make a fuselage that’s 32 meters long for it if possible?
@SpearSystems I plane to make a couple of variants but I want to make a -200 model the plane is specific will be called the EI-600-200 so around 65 meters length would be good and it would also need to be quite wide as well mirroring kind of the width of wide body's such as the 777 it would also be great if it could be quite light as well
Hi I’m looking to build a 777 sized plane which is why I came to you as I’ve seen some of your work and am quite impressed do think you could make it happen and build the fuesualge of the aircraft
Announcement this engine is now back in the works after thinking about its viability and I vow to finish the engine by July stay tuned for more updates and thank you to those who have helped along the way
Hello would you be interested in a partnership in designing military aircraft as I am looking to move more into making military planes check out some of my fighters in particular the Phantom Edge and Attack Vortex if your interested let me know
It all depends on what your after I make 3 electric engines meant to power light aircraft called the ED-100 series if your interested in them let me know
@NewWorldAerospace Hello about the EI-225-100ER again I know it’s a big ask but out of time constraints and my limited knowledge with building wings could you possibly build a wing for my plane?
@NewWorldAerospace I’m building a new plane do you think you can make the landing gear for it ? I can send through an unlisted link of the aircraft in question.
Very nice would you be interested in collaborating with future GA aircraft? I mainly specialise in aircraft engines such as the ED-200-A I could also see potential in fly by wire systems if we decide to work together
@Skykid028 it’s a pretty weird sounding way to power an engine there’s a plane a recently made on my profile called the RG200 which is a small scale version pretty much of what I’m trying to do here
Hello Jundroo I’ve created a fighter aircraft that I think would really demonstrate innovation in simple planes 2 could you please take into consideration featuring it if there is to be a part 3 it’s called the Eastern International Phantom Edge
Punning ham is a sub brand of Eastern International and shares many of the same parts and systems to simplify building complexity punning ham aircraft are designed for short haul regional routes and excel in fuel efficiency
Working on a new ultimate series version with fly by wire more advanced wing design as well as optimising fuel efficiency for best in class range so far the prototype has achieved 4 percent in fuel efficiency gains just through changing the wing designs
Forgot to mention in the description it now uses a hollow glass composite fuselage that’s lighter than traditional fuselages it’s been painted white by stock you can change it if you would like etc
Nice Plane 😎 Does Zhukov use the same Flap and Trim style controls as NWA planes ?
+2@SpearSystems A 737 A320 sized fuelslage approximately 40m in length with a spacious width and height whilst maintaining a similar size to the above aircraft it’s designed as a 737 narrow body competitor
+1@SpearSystems Hey I wanted to see if you wanted to work on the fuselage for my next upcoming plane if your Interested ?
https://www.simpleplanes.com/a/8UM3NR/Eastern-International-EI-200-7-NG-CEO
Link to the Current Engine option non NEO as for some reason it’s auto crediting last gens model
Used On The Following Aircraft
RG-400
EI-818-200
EI-200-7 NEO
EI-200-8 NEO
EI-200-9 NEO
Very nice build I’ll be using this on future military aircraft
+1@SpearSystems a job well done 👍an amazing job on the airframe @SpearSystems the RG-400 has now been released we’d be more than happy to supply engines for your builds in the future if needed thanks again - EAC
+1@Bilibiligiaogod what sized planes is this engine designed for
@SpearSystems Do you think you could build a 737-8 sized fuselage around 40m long etc could we do it as an unlisted build ?
@NewWorldAerospace https://www.simpleplanes.com/a/F3zOW8/Eastern-International-EI-200-Next-Generation
+1@NewWorldAerospace I can send the spec sheet in an unlisted link as well if you wanted to have a look at it ?
+1@NewWorldAerospace Would you be interested in supplying for a next gen aircraft I can post an unlisted link if your interested?
+1@SpearSystems Thank you for the fuselage I look forward to working with you sometime in the future amazing job!
+1@SpearSystems The specifications for the fuselage are :
+1Length 32.6m
And a height of anywhere between 4.5m to 5m
Thanks again.
@SpearSystems Do you think you can help me out I’m working on a -400 for the punningham RG series it’s a narrow body regional airliner could you make a fuselage that’s 32 meters long for it if possible?
@Subsere no problem electric tech is quite limited I’ve only recently been able to speed it up by 20km
@SpearSystems I plane to make a couple of variants but I want to make a -200 model the plane is specific will be called the EI-600-200 so around 65 meters length would be good and it would also need to be quite wide as well mirroring kind of the width of wide body's such as the 777 it would also be great if it could be quite light as well
+1Good stuff very well detailed
+1Hi I’m looking to build a 777 sized plane which is why I came to you as I’ve seen some of your work and am quite impressed do think you could make it happen and build the fuesualge of the aircraft
🤣 well done
@SleepyKitty that is actually very impressive well done 👍
Announcement this engine is now back in the works after thinking about its viability and I vow to finish the engine by July stay tuned for more updates and thank you to those who have helped along the way
Hello would you be interested in a partnership in designing military aircraft as I am looking to move more into making military planes check out some of my fighters in particular the Phantom Edge and Attack Vortex if your interested let me know
@NewWorldAerospace https://www.simpleplanes.com/a/o2Xx01/EI-225-100ER-Proto-4
+1It all depends on what your after I make 3 electric engines meant to power light aircraft called the ED-100 series if your interested in them let me know
This is very innovative I’ve never seen anything like this in a military aircraft the PID system sounds one of a kind
@NewWorldAerospace Hello about the EI-225-100ER again I know it’s a big ask but out of time constraints and my limited knowledge with building wings could you possibly build a wing for my plane?
+1@NewWorldAerospace Thanks! https://www.simpleplanes.com/a/QvI/EI-225-100ER-Gear-Revision
+1@NewWorldAerospace I’m building a new plane do you think you can make the landing gear for it ? I can send through an unlisted link of the aircraft in question.
+1@NewWorldAerospace That’s great to hear! happy to help
+1@NewWorldAerospace including the NGA engine I previously built?
+1@NewWorldAerospace https://www.simpleplanes.com/a/lFVQV4/NRP-70-200-neo
+1@NewWorldAerospace Do you need a hand with making an engine for one of these other 3 series?
+1Just a quick one the testing was conducted using the mentioned Boeing 777-9
Very nice would you be interested in collaborating with future GA aircraft? I mainly specialise in aircraft engines such as the ED-200-A I could also see potential in fly by wire systems if we decide to work together
+1Used in the following aircraft
EI-200-7 NG
EI-200-8 NG
EI-200-9 NG
EI-200-9XR NG
Do you either use the base game engines or make your own to suit your individual needs of your aircraft
@Skykid028 it’s a pretty weird sounding way to power an engine there’s a plane a recently made on my profile called the RG200 which is a small scale version pretty much of what I’m trying to do here
Based off Pigpen and Boeing F18 design
Hello Jundroo I’ve created a fighter aircraft that I think would really demonstrate innovation in simple planes 2 could you please take into consideration featuring it if there is to be a part 3 it’s called the Eastern International Phantom Edge
Punning ham is a sub brand of Eastern International and shares many of the same parts and systems to simplify building complexity punning ham aircraft are designed for short haul regional routes and excel in fuel efficiency
Replaced with EI200 Ultimate I & II refer to those aircraft instead
Aircraft Powered by ED-100-B Updated Frequently
EI-GEN-X EcoPlus+
Finally finished 3 prototypes later btw forget to mention the feusalage as all glass construction as well as the electric engine cowlings
Working on a new ultimate series version with fly by wire more advanced wing design as well as optimising fuel efficiency for best in class range so far the prototype has achieved 4 percent in fuel efficiency gains just through changing the wing designs
Can i use the wing design of this aircraft for a proto type plane I’m working on
+2H-400 NG helicopters coming soon H-400, H-500, and 600 will be out at the same time
Order the all new EI 200 Ultimate Series with 2X range advanced aerodynamic properties and more responsive fly by wire control systems today
Forgot to mention in the description it now uses a hollow glass composite fuselage that’s lighter than traditional fuselages it’s been painted white by stock you can change it if you would like etc
Fly today power and efficiency intertwined into the most advanced regional airliner ever built will you be the one to push its limits?