@realSavageMan Ah ok. I found that it's easier to build entirely with 0 mass/drag parts then just add it back when its needed; it helps prevent autoroll. But no worries :)
Looks amazing! I love all the little details, like those slats and the wing roots; I have no clue how you get them so smooth. I do have to wonder how the pilot gets up to the cockpit tho, maybe an elevator or a jet pack ;D
Woah, this is stunning, best Beaver on the site by far! One quick question though; how did you get the prop to start up so slow? Its a super neat effect and rather realistic
Woah, this is going to turn out amazing when it’s finished! Just the body work is stunning, I can’t wait to see what funky tree magic you incorporate too
I was playing around with rotor blades when I found a solution to them never stopping. In the xml editor of the rotors, set the rotorTensor to 0.01 or lower. The lower the number the faster they stop
Very nicely done! The level of detail both inside and out is outstanding. I’m glad you built one; there has been a disturbing lack of flying boats lately lol
Use a detacher. Attach the weapon to very bottom of it, then attach whatever fuselage pieces to the back/flat surface of the detacher. Set all fuselage and details to 0 mass and drag, and it should work fine. Weapon will deploy the same way a stock one would. Check out the bombs on my P-51d-20 and see what I did there
Awesome job! Shape is dead on and is super smooth. It also handles very nicely, and I like how there is no need for a gyroscope. Only little suggestion is to make cameras return to center, but other than that you did a marvelous job
Amazing, absolutely amazing! The livery is spot on and insanely cool, plus the cockpit is a very cool experience. The rotary engine and the custom prop is the cherry on top, that must've took hours to make lol. Wings and engine cowling are super smooth which make me happy. Only little thing I recommend is to put damperMultiplier on the rotators for the control surfaces. They are quite lurchy and realistically, the pilot would ease in and out of maneuvers. In the JointRotator section, put damperMultiplieron the left and put 10000 on the right. You can change this value to your liking
Nice! I first saw this and thought it was a replica of some experimental aircraft, but then I looked a little closer and saw it was fictional lol. Great plane, I love the inlet design
Amazing work! It so hard to pick a favorite aspect, so I'll just list a few. The paint chips are very unique; they add a good sense of age and use. The gear sequencing is very cool, I like how it stutters, for a lack of a better word. Also the tail separating mechanism is wonderful, it gives a further sense of realism. Bravo!
Awesome job! The attention to detail is superb. I love how you recreated the pilots experiences though the low FOV, buffeting, and accurate cockpit. Landing gear is done exceptionally well; very smooth and the suspension absorbs the hardest of landings. Shockcone movement is certainly interesting, it's amazing you were able to replicate it. I can't wait to see what you have in store next!
@realSavageMan Ah ok. I found that it's easier to build entirely with 0 mass/drag parts then just add it back when its needed; it helps prevent autoroll. But no worries :)
+1Looks amazing! I love all the little details, like those slats and the wing roots; I have no clue how you get them so smooth. I do have to wonder how the pilot gets up to the cockpit tho, maybe an elevator or a jet pack ;D
+1Woah, this is stunning, best Beaver on the site by far! One quick question though; how did you get the prop to start up so slow? Its a super neat effect and rather realistic
+1Now build the whole rover lol. Looks great btw, keep it up!
+1Well I think its a little late now! :P @realSavageMan
+1It does! It’s called the Bf-109 zwilling @MrShenanigans
+1Woah, this is amazing! The shapes are spot on, and the colors really bring out the smooth lines. You’ve outdone yourself again! @realSavageMan
+1Very interesting!
+1Absolutely perfect. Just the level of detail, the flight performance, the livery; everything is just perfect
+1This is revolutionary! It should be in the stock game. Will it work with the smooth front and smooth back feature?
+1Wait, this is SimplePlanes?!? It looks so real!
+1Sure, I can give it a shot. Anything in mind?
+1Woah, this is going to turn out amazing when it’s finished! Just the body work is stunning, I can’t wait to see what funky tree magic you incorporate too
+1Cool! It looks like it would need a bigger rudder to counteract the torque though
+1Woah, I think this is your best cockpit yet! And the detail on the pilot is amazing too!
+1Ok, thanks for the feedback. It worked great! I should be done within a day or two, I'll tag you before the release! @spefyjerbf
+1Awesome!
+1I love this plane! You did a great job with this one, I can't wait to see more!
+1Works great! @spefyjerbf
+1clamp01(Throttle > 0.8) * clamp01(TAS < 76)
+1This did the trick, thank you for the help! @spefyjerbf
Cool!
+1@spefyjerbf That works great! Thank you so much!
+1Darn, thanks anyway guys @AsteroidAsteroidTheBook @edensk
+1Woah, this is looking amazing! I can’t wait to try out that ILS
+1Absolutely stunning! Your cars are amazing! Perhaps a Mk4 Supra next?
+1Yes @lianken
+1Any idea on official release date?
+1Nice and cute!
+1cool!
+1Nice! The details are very cool!
+1Oh ok, no worries! Thank you @RicardoAs1515
+1Cool! Kinda would’ve liked a mention or credit about my mustang though
+1I was playing around with rotor blades when I found a solution to them never stopping. In the xml editor of the rotors, set the
+1rotorTensorto 0.01 or lower. The lower the number the faster they stopVery nicely done! The level of detail both inside and out is outstanding. I’m glad you built one; there has been a disturbing lack of flying boats lately lol
+1Awesome job! Would’ve never expected a fighter from you, but it looks great
+1Cool! Looks great
+1Use a detacher. Attach the weapon to very bottom of it, then attach whatever fuselage pieces to the back/flat surface of the detacher. Set all fuselage and details to 0 mass and drag, and it should work fine. Weapon will deploy the same way a stock one would. Check out the bombs on my P-51d-20 and see what I did there
+1Neat! @PlaneFlightX
+1Awesome work! The text on the side is very well done!
+1Awesome job! Shape is dead on and is super smooth. It also handles very nicely, and I like how there is no need for a gyroscope. Only little suggestion is to make cameras return to center, but other than that you did a marvelous job
+1That’s exactly what I was talking about, it looks great @KLM_747
+1Amazing, absolutely amazing! The livery is spot on and insanely cool, plus the cockpit is a very cool experience. The rotary engine and the custom prop is the cherry on top, that must've took hours to make lol. Wings and engine cowling are super smooth which make me happy. Only little thing I recommend is to put
+1damperMultiplieron the rotators for the control surfaces. They are quite lurchy and realistically, the pilot would ease in and out of maneuvers. In the JointRotator section, putdamperMultiplieron the left and put10000on the right. You can change this value to your likingNice! I first saw this and thought it was a replica of some experimental aircraft, but then I looked a little closer and saw it was fictional lol. Great plane, I love the inlet design
+1Thank you very much! I will be sure to credit you @Marine
+1I agree. This is why I like to use the Small Rotators, because you can rotate them on the Z axis and since they are circular, it follows the same path
+1Amazing work! It so hard to pick a favorite aspect, so I'll just list a few. The paint chips are very unique; they add a good sense of age and use. The gear sequencing is very cool, I like how it stutters, for a lack of a better word. Also the tail separating mechanism is wonderful, it gives a further sense of realism. Bravo!
+1Indeed! @SledDriver
+1Cool! Reminds me a little of a parasite fighter with its wings swept, but a stock SP plane with its wings extended lol
+1Awesome job! The attention to detail is superb. I love how you recreated the pilots experiences though the low FOV, buffeting, and accurate cockpit. Landing gear is done exceptionally well; very smooth and the suspension absorbs the hardest of landings. Shockcone movement is certainly interesting, it's amazing you were able to replicate it. I can't wait to see what you have in store next!
+1Nicely done! I’m glad to see another build from you
+1