I used it to attack a convoy, but the AA accuracy was so good that it hit the pilot right, the plane fell and continued rolling on the ground and firing uncontrolled bursts until it disappeared over the horizon. It was a spectacular scene!
I know this eVTOL is autonomous, but my desire to make a basic cockpit won out XD
To be honest, I think this is the most mature eVTOL currently available on the market, and I would definitely fly in one of these; The Chinese do a great job.
I was doing aerial refueling right after getting out of a dogfight. When out of nowhere the oil tanker explodes in front of me and I receive a missile alert immediately afterwards, it was a shocking scene.
So I, very angry, went after the aggressor, but this time he ripped off my 2 vertical stabilizers with a cannon blast. I left the fight desperately looking for a place to land, I flew for minutes without the vertical stabilizers, until I managed to stabilize on the short Wright final, I lowered the landing gear and I touched down gently on the runway, but I couldn't overuse the brakes, as I risked flipping the aircraft over.
I braked gently but the jet wouldn't stop for anything. It was then that I saw the end of the runway slowly approaching before my eyes, my heart raced and I slammed on the brakes, the jet started to skid and I crossed the runway, and fell into the ravine.The left landing gear collapsed, and the jet finally came to a stop.
Fortunately, the pilot suffered only fractures to his ribs, chest, and spine from the blunt impact with the ground. Due to the severity of his injuries, the pilot will be forced to retire, and his family will receive compensation from the Air Force.
Very good! I like the fact that you dedicated yourself to making animated doors. Here's a tip to cancel out the main rotor torque:Go into overload and drag up until you reach RotorPerfScarlas, Once there you will find several properties all with the number 1, there you must Reset (0) the following properties: collectiveTorque and cyclicMotorDragTorque. Like in this image here. After that, just apply it to cancel the torque, I hope I helped you ;)
@NewWorldAerospace First, take a hollow fuselage and make a circle, use overload to increase the thickness of the circle a lot (3.3), then apply the tail rotor inside the circle and disable the collision of the parts. The second step is to cover the circle with the tail design using the hollow fuselage, make smooth curves and use fuselage cutting to not let the covering enter the circle, making sure all the parts are disabled against collision. The third step is to finish with the vertical stabilizer, add some details to make it look cool and you are done. dissect the fenestron of my helicopter to understand better.
I hope I helped.
First you need to practice your talent using blueprints of real aircraft designs on the internet. Choose an image saved in the gallery and open the image inside the game, after that just follow the lines carefully. This is how I create my projects
@Ericshideout I confess that I didn't really like the look of the R88, it kind of strays a bit from Robinson's traditional design. Regarding the H140 I also found it average, it is just another variant/update of the already old EC135
It's very rare to find such a well-made Saudia aircraft on the site. Good job!
+7I love the fact that Ace Combat is present in all virtual aviation games
+5The controls are extremely user-friendly and a pleasure to fly. You did an amazing job!
+3Built on Android? Impossible 🤯
+3Very good concept, I just need to avoid rough maneuvers with the Yaw so as not to destroy the rotors. This is good
+3I totally get you man, don't feel bad. It's normal to get exhausted after a while.
+3This is really very helpful
+3@Rb2h Thanks, but I'm not new, I had stopped playing in 2017
+3Red bull: You're hired!
+2The combination of a very well-made construction with very high-quality images makes this publication simply unbeatable, magnificent work.
+2I love the controls on your tanks, smooth and consistent.
+2@SemedianIndustries I look forward to seeing the results of your work!
+2@MA2211CwCABaerospace That's true, this Orni-03 is more of a performance demonstrator than something really practical.
+2Another innovation, congratulations!
+2The fact that you fixed the scale makes it even better
+2I used it to attack a convoy, but the AA accuracy was so good that it hit the pilot right, the plane fell and continued rolling on the ground and firing uncontrolled bursts until it disappeared over the horizon. It was a spectacular scene!
+2@MrCOPTY How cool! A tip, make the fuselage as light as paper, otherwise it won't leave the ground
+2Is this flower chasing me here? 🌹
+2True, most of the records and sightings are just civilian aircraft or are fake created by people who want to take advantage of that moment.
+2This is the heaviest and most sophisticated helicopter I have ever created, ironically it was easier to build compared to smaller helicopters
+2Helicopters are very underrated around here
+2@Eagleman101SP @Firecharge123 Thank you guys <3
+2That big nose in the front is the 429's optional radar, you can remove it if you want .
+2@MitsubishiTritonMyBeloved I know, but I avoid using carrier names or real registrations to avoid copyright issues.
+2Although I can't download this, I can say that it is really well crafted and beautiful.
+2@Maruk @Superliner350 @Eagleman101SP Thanks guys!
+2I'm impressed that this was done on Android, it's an amazing ship
+2I know this eVTOL is autonomous, but my desire to make a basic cockpit won out XD
To be honest, I think this is the most mature eVTOL currently available on the market, and I would definitely fly in one of these; The Chinese do a great job.
+1So majestic and incredible!
+1@BluesynVN You were faster than me XD
+1It looks really good, I really want to get my hands on it!
T
+1T!
+1This deserves much more recognition, the launch system until the end of the missile's burn is simply brilliant and realistic. I loved it!
+1@NewWorldAerospace Yes, the jet proved to be quite robust, reliable and brought the pilot back alive. We are grateful to the NWA engineers.
+1I was doing aerial refueling right after getting out of a dogfight. When out of nowhere the oil tanker explodes in front of me and I receive a missile alert immediately afterwards, it was a shocking scene.
So I, very angry, went after the aggressor, but this time he ripped off my 2 vertical stabilizers with a cannon blast. I left the fight desperately looking for a place to land, I flew for minutes without the vertical stabilizers, until I managed to stabilize on the short Wright final, I lowered the landing gear and I touched down gently on the runway, but I couldn't overuse the brakes, as I risked flipping the aircraft over.
I braked gently but the jet wouldn't stop for anything. It was then that I saw the end of the runway slowly approaching before my eyes, my heart raced and I slammed on the brakes, the jet started to skid and I crossed the runway, and fell into the ravine.The left landing gear collapsed, and the jet finally came to a stop.
Fortunately, the pilot suffered only fractures to his ribs, chest, and spine from the blunt impact with the ground. Due to the severity of his injuries, the pilot will be forced to retire, and his family will receive compensation from the Air Force.
The attacker was the Wasp of Jundroo
+1If they had used this helicopter, they would have already avoided 99% of the Jurassic Park tragedy.
+1Congratulations! Happy birthday!
+1Very good! I like the fact that you dedicated yourself to making animated doors. Here's a tip to cancel out the main rotor torque:Go into overload and drag up until you reach RotorPerfScarlas, Once there you will find several properties all with the number 1, there you must Reset (0) the following properties: collectiveTorque and cyclicMotorDragTorque. Like in this image here. After that, just apply it to cancel the torque, I hope I helped you ;)
+1This flies like a real helicopter
+1@WinsWings Thanks!
+1@BARREND120 Great suggestion, I like that helicopter.
+1@NewWorldAerospace First, take a hollow fuselage and make a circle, use overload to increase the thickness of the circle a lot (3.3), then apply the tail rotor inside the circle and disable the collision of the parts. The second step is to cover the circle with the tail design using the hollow fuselage, make smooth curves and use fuselage cutting to not let the covering enter the circle, making sure all the parts are disabled against collision. The third step is to finish with the vertical stabilizer, add some details to make it look cool and you are done. dissect the fenestron of my helicopter to understand better.
+1I hope I helped.
Very beautiful! It reminds me of Chilean LAN Airlines
+1It should be ready in a few days, it's the hardest project I've ever done.
+1@OverlordPrime I thought the problem was only on my phone, thanks for letting me know about this.
+1First you need to practice your talent using blueprints of real aircraft designs on the internet. Choose an image saved in the gallery and open the image inside the game, after that just follow the lines carefully. This is how I create my projects
+1Long time no see, welcome back
+1@Ericshideout I confess that I didn't really like the look of the R88, it kind of strays a bit from Robinson's traditional design. Regarding the H140 I also found it average, it is just another variant/update of the already old EC135
+1@Tingly06822 Thank you!
+1Fantastic! And it even comes with three more livery options, great job
+1