Profile image

Airbus Helicopters H160

13.4k Berulacraft  one month ago

Hello again! It's been a while since I posted anything, so here we go.This is probably the second best H160 in the history of this site, it was difficult but I managed to finish it in time, it is my most advanced and beautiful creation I have ever made :)


AIRBUS H160

Meet the most modern helicopter in the world. The Airbus H160. Have you ever imagined a helicopter that is not just an evolution, but a revolution in rotary wing aviation, with 68 patents? Well, this is the H160, with an innovative design, being the first new generation helicopter capable of performing any type of mission, be it for offshore transport, medical rescue, police operations or even executive flights.

The H160 is a medium-sized helicopter that came to fill a gap left by the AS365 Dauphin. The H160 is equipped with two powerful Safran Arrano 1A engines of 1,100 and 1,300 shp each. It also comes equipped with state-of-the-art onboard avionics. The Fenestron tilt configuration allows the H160 to have a more efficient flight while at the same time drastically reducing aircraft noise and noise.

Wiki:

The Airbus Helicopters H160 (formerly X4) is a medium utility helicopter developed by Airbus Helicopters. Formally launched at Heli-Expo in Orlando, Florida on 3 March 2015, it is intended to replace the AS365 and EC155 models in the firm's lineup. In June 2015, the first test flight took place. It received its EASA type certification in July 2020, and first deliveries were in December 2021.

The Airbus H160 is a next-generation helicopter developed by Airbus Helicopters, designed to be versatile, efficient and more sustainable. It belongs to the medium helicopter category and is designed to meet a wide range of missions, such as offshore transport (oil and gas industry), emergency medical services (EMS), search and rescue (SAR), executive transport and government missions.


Specifications:

Model: Airbus Helicopters H160
Capacity: 12 Passengers
Crew: 1 (Two in IFR operations)
Speed: 325km/h (201mph, 175kn)
Service Ceiling: 6,096m(20,000ft)
Price: $18,000,000,00 USD

Activation groups:

AG1 => Start Engine
AG2 => NAV Lights
AG3 => Speed Brake
AG4 => Parking Brakes
VTOL => Collective
Trim => Nose Angle

Gallery:

Builder's Note:
It is an extremely versatile, reliable and VERY FAST helicopter! Seriously this thing is very fast, has an excellent and comfortable semi-autonomous cruise flight. Furthermore, it performs very well in hovering flight, better than 90% of my helicopters. That said, have fun!

Spotlights

General Characteristics

  • Successors 1 airplane(s) +35 bonus
  • Created On Android
  • Wingspan 44.8ft (13.7m)
  • Length 53.5ft (16.3m)
  • Height 18.0ft (5.5m)
  • Empty Weight 13,805lbs (6,261kg)
  • Loaded Weight 13,982lbs (6,342kg)

Performance

  • Power/Weight Ratio 9.019
  • Wing Loading 1,630.1lbs/ft2 (7,959.0kg/m2)
  • Wing Area 8.6ft2 (0.8m2)
  • Drag Points 841

Parts

  • Number of Parts 305
  • Control Surfaces 0
  • Performance Cost 1,372
  • Log in to leave a comment
  • Profile image

    Amazing

    one month ago
  • Profile image

    this is the best helicopter i have used

    +1 one month ago
  • Profile image

    And the description is right. It's very fast. So fast, that it just reached 500 knots!

    +1 one month ago
  • Profile image

    BEAUTIFUL!!!!

    +1 one month ago
  • Profile image
    2,997 Pleco123

    This is the best heli ive ever seen before

    +1 one month ago
  • Profile image

    @Berulacraft please do so 🙏🙏🙏 also the H130, i seen it in your planned builds

    one month ago
  • Profile image
    600 Kryos

    New GOAT heli from GOAT creator 🔥

    +1 one month ago
  • Profile image
    13.4k Berulacraft

    @BARREND120 Great suggestion, I like that helicopter.

    +1 one month ago
  • Profile image
    13.4k Berulacraft

    @NewWorldAerospace First, take a hollow fuselage and make a circle, use overload to increase the thickness of the circle a lot (3.3), then apply the tail rotor inside the circle and disable the collision of the parts. The second step is to cover the circle with the tail design using the hollow fuselage, make smooth curves and use fuselage cutting to not let the covering enter the circle, making sure all the parts are disabled against collision. The third step is to finish with the vertical stabilizer, add some details to make it look cool and you are done. dissect the fenestron of my helicopter to understand better.
    I hope I helped.

    +1 one month ago
  • Profile image
    22.9k BARREND120

    I would suggest building an NH90

    +1 one month ago
  • Profile image

    Btw, @Berulacraft
    Can You Either Teach Me Or Help Me Building A Fenetsron Tail ?

    one month ago
  • Profile image

    Finally,

    Fenestron Tail !

    +1 one month ago
  • Profile image

    Yay! Finally! Thank you so much for this work, absolutely BRILLIANT!

    one month ago
  • Profile image

    @dekanii ye

    one month ago
  • Profile image
    38.1k dekanii

    @SuperSuperTheSylph its.. unrealistically fast
    but i like it

    +1 one month ago
  • Profile image
    2,997 Pleco123

    Finaly the H160!

    one month ago
  • Profile image

    Holy shit. Bro is BACK.

    +1 one month ago
  • Profile image
    13.4k Berulacraft

    @SouthJetLinhasAereas Thank you very much

    one month ago
  • Profile image

    Man... You are an absolute GOAT

    +1 one month ago
  • Profile image
    13.4k Berulacraft

    @SuperSuperTheSylph Lmao, Yes, it is very fast, users can choose between flying within the limit established by the manufacturer or flying like Maverick.

    one month ago
  • Profile image

    mf is fast
    750 km/h

    +1 one month ago
  • Profile image
    13.4k Berulacraft

    @HorizonTech5 Don't worry, just practice a little and you can master this machine ;)

    one month ago