@xNotDumb
I can only say that this is the result of looking at photos of actual airplane interiors and roughly reproducing them with the technology I have. I have no intention of imitating or plagiarizing.
@Yourlocalhuman
Sorry, I did not understand the intent of your comment. Of course I know that the P-51 B is available as a stock plane. Is there some rule that says you can't upload the same model as a stock plane...?
@Killer123562
Thank you for your compliments and appreciation. You compliment me a little too much and I am embarrassed.
There are many players of this game who create amazing works. I hope you will enjoy the works of various players and vote in favor of them. I will do the same.
@PapaKernels
Thanks for the advice! I will try to see what kind of flying model I can get with the wing shape as it is on the actual aircraft.
Thanks. Your A-3 looks nice and realistic with the timing of the landing gear folding :)
@JustDragon
@Kangy
@Kittyhawk208
@Oxen
Thank you for your comments.
I will continue to do my best to create good works.
By the way, I have been working on this piece from the beginning. This is the first time I submitted it.
@EternalDarkness
Thank you very much! It took a lot of trial and error and time to make this crawler. I am very happy to hear you say so.
Thank you also for your advice. I did think it would have been interesting to have a viewpoint looking into the sights, etc.
@dekanii
I made it with the aim of creating an aircraft that could defend itself, bomb, and look good in less than 600 parts. I omitted some details. I hope you enjoy it!
@MrCOPTY
Thank you very much!
Thanks also for the advice. However, the "calculate Drag" was already set to "false" on my build of the Raundel text label parts….
@WinsWings
Thank you very much! I am so honored to have won a prize.
It is always inspiring to participate in your challenges and to see the wonderful work of so many different builders. This was another very enjoyable challenge.
I look forward to another opportunity to participate :)
@EternalDarkness
Thank you for flying my piece and for telling me about the various issues, I was not aware that the CoM was out of alignment. I will take your advice into consideration the next time I make one.
@WinsWings
Thank you for your comment. The deadline for the Challenge is approaching, so this plane will likely be the last piece to participate. I hope you like it :)
@WinsWings
Oh my...thank you so much! I am very pleased.
Only 85 parts were used, but it's beautiful... less than 1/7th the number of parts of the ZERO I once created.
The flap controls are interesting.
As someone who plays KSP and loves Kerbals, I give you the upvote.
+2@xNotDumb
+2I can only say that this is the result of looking at photos of actual airplane interiors and roughly reproducing them with the technology I have. I have no intention of imitating or plagiarizing.
@Yourlocalhuman
+2Sorry, I did not understand the intent of your comment. Of course I know that the P-51 B is available as a stock plane. Is there some rule that says you can't upload the same model as a stock plane...?
@Kangy
+2Thank you for your comment!
@Killer123562
+2Thank you for your compliments and appreciation. You compliment me a little too much and I am embarrassed.
There are many players of this game who create amazing works. I hope you will enjoy the works of various players and vote in favor of them. I will do the same.
@99807
+2Thank you! I'm glad you like it.
@Kangy
+2Thanks for the advice!
I will try different things in SP to see how the flight characteristics change depending on the wing shape.
@PapaKernels
+2Thanks for the advice! I will try to see what kind of flying model I can get with the wing shape as it is on the actual aircraft.
Thanks. Your A-3 looks nice and realistic with the timing of the landing gear folding :)
@Kangy
+2Thank you!
...I always wonder how much maneuverability I should have in my aircraft.... I will look into it and try it out in the future.
@GrentonAircraftCo
+2Thanks for letting me know. I have added in the description section that you flew this plane in VR.
@SimplyPlain
+2Thanks for the comment! Glad you like it :)
@Alisuchanka
+2Thank you! Indeed. But I think your modeling and painting is far more beautiful and realistic :)
@TatsuTheOtaku
+2@JuliusCeasor98
Thanks!
@GrentonAircraftCo
Thanks for the comment. As beenz said, I don't know if this will work in VR. Sorry.
@CheckOneTwo
+2Thanks for your comment!
@JustDragon
+2@Kangy
@Kittyhawk208
@Oxen
Thank you for your comments.
I will continue to do my best to create good works.
By the way, I have been working on this piece from the beginning. This is the first time I submitted it.
@EternalDarkness
+1Thank you very much! It took a lot of trial and error and time to make this crawler. I am very happy to hear you say so.
Thank you also for your advice. I did think it would have been interesting to have a viewpoint looking into the sights, etc.
@Boeing727200F
+1@Monarchii
@Bugati87
Thank you! I'm glad to hear you say so :)
@LunarEclipseSP
+1Thank you! :)
@ShinyGemsBro
+1Yeah, I make jets sometimes.
Sometimes.Not often.
@ThomasRoderick
+1My previous work
@WinsWings
+1Thank you very much! :)
@Apollo018362
+1Ah, I have tried it too. Very effective technique.
Lovely picture, by the way.
@Apollo018362
+1Indeed, it looks more like glass when painted in black.
I will try it on my next piece. Thanks for the advice :)
@Apollo018362
+1Thank you very much! I've been absent for a bit, but I'm going to start building planes again :)
@dekanii
+1I made it with the aim of creating an aircraft that could defend itself, bomb, and look good in less than 600 parts. I omitted some details. I hope you enjoy it!
@ShinyGemsBro
+1@TheUltimatePlaneLover
It was my first time building a heavy bomber. I hope you like it :)
@ShinyGemsBro
+1Beautiful winter camouflage. It is further implemanted in various places. Nice :)
Very beautiful replica. Love it.
+1@WinsWings
+1Low Parts and beautiful looks. Nice :)
@WinsWings
+1I have the same thoughts as you.
Stealing someone else's hard work and gaining accolades for it...it's inexcusable. It makes me very sad.
@WinsWings
+1No problem. I am glad you remembered his Sea Vane. That is my favorite piece. It's a masterpiece.
@VRCaPable
+1Thanks for trying it out in VR. I made the cockpit in a very lazy way, so it looks like some parts didn't work well. Sorry.
@TheUltimatePlaneLover
+1@Jaspy190
Thank you :)
@Omoriboy
+1@Rb2h
@Boeing727200F
Thank you all for your comments!
@WinsWings
+1Thanks for the comment!
I wanted to build a turboprop engine airplane, so I built this build.
@WinsWings
+1Thank you very much.
I also like your "vampire", low parts and high quality.
@MrCOPTY
+1Thank you very much!
Thanks also for the advice. However, the "calculate Drag" was already set to "false" on my build of the Raundel text label parts….
@WinsWings
+1Yeah, I know...it must be difficult for you to award me prizes, lol.
Thank you for always appreciating my work :)
@WinsWings
+1Thank you very much! I am so honored to have won a prize.
It is always inspiring to participate in your challenges and to see the wonderful work of so many different builders. This was another very enjoyable challenge.
I look forward to another opportunity to participate :)
@EternalDarkness
+1Thank you for flying my piece and for telling me about the various issues, I was not aware that the CoM was out of alignment. I will take your advice into consideration the next time I make one.
@WinsWings
+1Thank you for your comment. The deadline for the Challenge is approaching, so this plane will likely be the last piece to participate. I hope you like it :)
@ShinyGemsBro
+1I had never used that technique...I will try it next time. Thanks for the advice :)
@WinsWings
+1Thank you for your comment, upvote and spotlight to me.
I hope you like it :)
@Speedhunter
+1@Hahahahaahahshs
@TheAviator77
@LonelySea22
Thank you very much. I'm glad to hear it :)
@Bird6369
+1Oops, it's true. Thanks for pointing that out. The formula seems to have disappeared. I'll upload a fixed version later.
I would like to participate in this challenge.
+1@WinsWings
+1Thanks for the comment.
I had a hard time deciding what kind of paint to use until the very end.
Cool, simple, nice.
+1Nice representation of the radiator on the side.
@WinsWings
+1Oh my...thank you so much! I am very pleased.
Only 85 parts were used, but it's beautiful... less than 1/7th the number of parts of the ZERO I once created.
The flap controls are interesting.
@LonelySea22
+1Thanks for the comment.
I think the Tiger Moth you built is great too :)