@BARREND120 not working?
impossible, i tried it and it worked
check for each one:
• have you put the "rev"name in ActivationGroup attribute on the engine?
or atleast its similar to the name of the variable
• have you set the "zeroToDeactivate" attribute to true, or atleast delete it ? (bc the attribute will disappear if it's set to True)
• or it might be from the FT itself
check if theres abnormalities on it
or for atleast try to tell me whats the problem, i could help you
@BARREND120 you can use this:
put "rev" on activation input on the engine, make sure "zeroToDeactivate : false" attribute is deleted
then go to variable setter, put name the same as you put it on the engine (rev), then put this :
(Trim <= -0.005) & GS>1.5 ? 0 : 1
on the value
you could change the input to be Pitch, VTOL or anything else
to adjust the reverse speed, change the value after the "GS>"
it will limit the speed of reverse, very cool
please note this, this Stryker has high CoM, so its prone to flipping on high speed turns
its better to lower your height using the hydro suspension or just slow down while turning
@DiesenAndCornel sounds reasonable, but you dont need to said that to yourself like that
everyone has their own uniqueness, as for what you just said, i do sometimes think to myself what am i good at, or am i even have anything unique at all that makes me different than others
id say its pretty advanced for its time
intergrated soft/hard kill APS, better composite armor, gun launched ATGM (unlike its western counterpart)
and it can even become an IFV, with the cost of reduced ammo load
i think the side skirts have better armor againt CE than the front armor
NAVAL WARFARE MENTIONED !!!!!! 🔥🗣️
+112 hours has passed, and i didnt know the earth has exploded 11 hours 55 minutes ago
wannabe comet
+1coal powered dorito
+3@xNotDumb how.. ironic
@BARREND120 not working?
impossible, i tried it and it worked
check for each one:
• have you put the "rev"name in ActivationGroup attribute on the engine?
or atleast its similar to the name of the variable
• have you set the "zeroToDeactivate" attribute to true, or atleast delete it ? (bc the attribute will disappear if it's set to True)
• or it might be from the FT itself
check if theres abnormalities on it
or for atleast try to tell me whats the problem, i could help you
@SakiSenArmyIndustries well, you could use the VR seat to compare it, it would make more sense to the real life scale
i love the suspension on this tank, very smooth and not stiff
+1but i hope the scale on this thing would be more.. realistic?
its too large
@TemporaryReplacement afaik Zhixunlin quit SP for now, but he said to me probably he'll do a comeback
+1@BARREND120 you can use this:
put "rev" on activation input on the engine, make sure "zeroToDeactivate : false" attribute is deleted
then go to variable setter, put name the same as you put it on the engine (rev), then put this :
(Trim <= -0.005) & GS>1.5 ? 0 : 1
on the value
you could change the input to be Pitch, VTOL or anything else
to adjust the reverse speed, change the value after the "GS>"
it will limit the speed of reverse, very cool
not bad, i like the shape of it
wowowowowoow PLANE
i thought are there no reverse speed
+1when i stopped now the tank is reversing
funny tonk with no reverse speed
wher normal chally 2
i n e e d i t
please note this, this Stryker has high CoM, so its prone to flipping on high speed turns
its better to lower your height using the hydro suspension or just slow down while turning
@Kryos thank you 🙃
@DiesenAndCornel sounds reasonable, but you dont need to said that to yourself like that
everyone has their own uniqueness, as for what you just said, i do sometimes think to myself what am i good at, or am i even have anything unique at all that makes me different than others
as a matter of fact, the FT magic isnt mine, i kinda "stole" it, but thanks for crediting me anyway
we got the sturer emil
+1now we need the dicker max
@SuperSuperTheSylph its.. unrealistically fast
+1but i like it
@TheCommentaryGuy well, id say it is
but ill consider it
@B1BLancer b1 lancer propaganda 💔
+1@TheCommentaryGuy ayoo
hmmm i don really do much of chinese tanks
miku miku you can call me miku
+1blue hair blue tie hiding in yo wifi
and also congrats ,again ,for getting gold !! 😁✨
@novaskytwt ay congrats for gold !!!!
+2id say its pretty advanced for its time
+2intergrated soft/hard kill APS, better composite armor, gun launched ATGM (unlike its western counterpart)
and it can even become an IFV, with the cost of reduced ammo load
@Zhixunlin23 yuh, cheese
@AndiTontrando thanks
@Randomplayer afaik there's no deadline
i already asked the same question
@SomeSPGuyWhoLikesLore or.. i hope that so you can upload images from your file to be the thumbnail for your post
+1impressive
the wings has a finer tuner now, unlike the ones we already have
@ToroInoue no wonder 😗
i think it would have looked better with the smooth part disabled so it would look like it have "sharp corners"
+1@am096 oh wait i didnt read the description fully, my bad
+3i just scaled it until i feel like its the right scale
@Technicalstrat definitely 😁
+1but that part count.. i think ill pass
but this is definitely a great build, great job
@SuperSuperTheSylph a solution to everything
+1i love this
+1very well made
centurion with sharp corners
+2scary
very nice m1128, i really like it
+2@combinetheelite i couldnt really make it so you could zoom in more
+1the only thing you can do is aim and pray it hits the target
@Rb2h youre supposed to scale it to be larger
+1oh wow this is very good
i like it
@HeavyMetal your welcome
@novaskytwt oh you're right it does looks more like the Type 90 and the Leo 2A4
+1no SAM included?
@Object775blyat it wont fly straight.
whoa 😮
i like the overall design, it looks like the leclerc
@Object775blyat almost there, only lacking interior
but theres one problem with the missile..
@Object775blyat thanks !