@ACEPILOT109
Just some constructive criticism...
You should probably edit your video so that you don't cut off your own voice, but otherwise, great vid!
@ACEPILOT109
Actually, after experimenting a bit with the connections (like you said to, kind of), I found that it works perfect to connect the wheel to the floppy rotator which is attached to the shock. Thank you for your advice!
Then don't auto reconnect.
Just add a connection on the back of the fuselage you are looking to grow off of and then add another fuselage. Do this with each fuselage in the row. When you are done building with those fuselages, then auto reconnect them back into your plane.
@Ayvieyation
@Thelionslipstonight
While I believe skill and experience is a huge part of it, it all comes down to time and effort. I put a lot of time into this to get each detail right. Another thing is just going the extra mile. I didn't need custom missiles, but it made it better didn't it? I think anyone can make a quality build if they spend the time on it.
Are you sure @SPMaker and @SPmaker2000 aren't upvote generating accounts?
@SPbuilder1
I have proof. One of your fake accounts has a plane that is nearly identical to this plane and the successor system didn't indicate that they were based on each other... Therefore those two accounts are on the same device, and we know what that means... Also, these two other accounts have both upvoted all of your builds, and you all of theirs.
Read the rules.
You need to make sure the fuselage you are trying to grow off of doesn't have a connection on the side you are trying to add a new fuselage to.
@Ayvieyation
@WNP78 @SnoWFLakE0s
I have a question.
I need to know how to make an input with a range.
For example, I need to make a control surface that is only active when pitch is between certain values. How would I do such a thing?
tiny engine for tiny plane
+2GeT iN tHe VaN
+2tHeRe'S cAnDy I pRoMiSe
Minecraftrunner 2013
So you use disconnect all @Ayvieyation
@Alta2809
+1No Problem!
Me neither @Diloph
Neat
@ACEPILOT109
Try some 3d party software like WeVideo or iMovie for the editing, maybe it will work then
Oh I get it now
You take the cube out of cube
Lol
@ACEPILOT109
Just some constructive criticism...
You should probably edit your video so that you don't cut off your own voice, but otherwise, great vid!
@ACEPILOT109
I just need to add some more things and I will release it and tag you.
Astronauticus Pilatus Drivus yeetus
@ACEPILOT109
Actually, after experimenting a bit with the connections (like you said to, kind of), I found that it works perfect to connect the wheel to the floppy rotator which is attached to the shock. Thank you for your advice!
@ACEPILOT
Okay
BTW I tried reconnecting it and it still did that.
@ACEPILOT109
Are you on multiplayer right now?
@ACEPILOT109
Oh. Okay.
Thanks for the upvote tho!
And I will tag you
@ACEPILOT109
lol
that too
@ACEPILOT109
ikr
Sometimes they make the WWII planes seem to go like 700 mph.
Lol
@SnoWFLakeos
@ACEPILOT109
@Diloph
@Hedero
Sorry to tag you guys, but I have a problem, and I thought I would come to the best builders I knew.
@Diloph
XF not F
@Diloph
The number
And the designation
@Diloph
You might want to correct the title
Also you might want to add to the differences that your horizontal stabilizer is bigger.
Watch your brother make one too
+1@Shnippy
Np
Then don't auto reconnect.
Just add a connection on the back of the fuselage you are looking to grow off of and then add another fuselage. Do this with each fuselage in the row. When you are done building with those fuselages, then auto reconnect them back into your plane.
@Ayvieyation
@SPmaker2000
@SPMaker
@SPbuilder1
Okay. I am sorry for wrongfully accusing you.
@Thelionslipstonight
+1While I believe skill and experience is a huge part of it, it all comes down to time and effort. I put a lot of time into this to get each detail right. Another thing is just going the extra mile. I didn't need custom missiles, but it made it better didn't it? I think anyone can make a quality build if they spend the time on it.
Bruh you got two things on the front page at once!
@Nickil0212
Thank you so much!
@Notaleopard
(I'm not gonna thank you one each post individually, that would be spam)
Oh. Did removing the connection solve your problem?
@Ayvieyation
@EternalDarkness
+1I think something fishy may be going on here...
Are you sure @SPMaker and @SPmaker2000 aren't upvote generating accounts?
@SPbuilder1
I have proof. One of your fake accounts has a plane that is nearly identical to this plane and the successor system didn't indicate that they were based on each other... Therefore those two accounts are on the same device, and we know what that means... Also, these two other accounts have both upvoted all of your builds, and you all of theirs.
Read the rules.
Are you sure you didn't just repaint the stock bush plane?
@Notaleopard
Thanks for upvoting a bunch of my posts!
But I have to ask, why?
(Not a problem I'm just curious)
Thanks!
@Notaleopard
Thanks!
@Notaleopard
Thanks!
@Notaleopard
Thanks!
@Notaleopard
Thanks @Notaleopard
I like the Trump 757 and the Citation
Oh
That's sad
@Notaleopard
Also, can you please check out my latest forum? I think you might be able to help.
I want to sea dat Italian Seaplane
Are you saying your gonna leave when you complete this list?
You need to make sure the fuselage you are trying to grow off of doesn't have a connection on the side you are trying to add a new fuselage to.
@Ayvieyation
Thanks
@Kimfri
Lol nice
@Kimfri
@TheSlimeInATor
+1My guess is Kimfri just saved the cat girl as a subassembly and stuck her in the cockpit for the picture.
30th updoot
@WNP78 @SnoWFLakE0s
I have a question.
I need to know how to make an input with a range.
For example, I need to make a control surface that is only active when pitch is between certain values. How would I do such a thing?