Sleek, simple, and beautiful. A great looking build. Good job on minimizing that part count. The plane looks like it should have double the part count.
@Joco80 There is some modding involved, but the modding isn't the easy part. All you do with the modding is scale the engine exhaust. The rest is aligning and scaling the engine exhaust so it looks like crosshairs.
Mostly what @RailfanEthan said. Ccooper always made single engine prop planes. They were, in one word, fine. Not bad, but not great either. I'm not sure why he got so much backlash, even if he did only make mediocre builds that were repetitive.
Disable the mods, then log into your account in the share aircraft feature. Putting your SP account into the upload aircraft window cannot be done with mods installed, to make sure that no one steals your login info.
@Swiftsure Yes, I am designing it as a concept (the curves and the structure overall would most likely be impractical due to how hard it would be to construct). The building isn't designed for any specific use.
@TheNCRranger Grab the cockpit, but it is nearly impossible to drag the intact escape pod into your subassemblies.... I would suggest just building around the escape pod.
@Rohan hehe, a joke i assume, but some might interpret that as something else. I also will use some (educational versions) of autodesk products, specifically inventor and revit.
@TheDoodleBanger My first idea came from a bug in an aircraft where the guns were nudged too close to the craft, so the bullets would hit the craft in such a way that the craft would lurch forward before exploding. So then I knew that bullets could propel a craft, but I couldn't make an engine, because it would explode. Months later, I found out that parachutes were immune to bullet damage. I made an armored aircraft, and then I finally made the impulse engine with XML modded guns that had large weight, shooting at a parachute.
@TheNCRranger Missiles can be intercepted with bullets. You can make a shotgun by XML modding a gun's fire rate and bullet spread, or you can use the fine tuner mod to make a multi-barreled gun that shoots bullets in definite angles.
@AfterShock Im not sure about how it could be crash resistant. Its not that it is resistant to impact, rather, it just cannot take damage from bullets, until the bullets move fast enough for an actual impact (which is much faster than a normal minigun bullet).
@MrSharp Yep. A few days ago I discovered that parachutes were invincible to (Unless if bullet speed and caliber are modded to be crazy) bullet weapons. My first course of action was to make armor. After that, I made this. This is a really simple contraption. The only thing modded abut the gun is its bullet weight, which makes sense, because if the bullet has no weight, then it wont push.
@Visify Yes, its armor soaks up minigun shots, bullets from AA tanks, and bullets from destroyers. It is, however, vulnerable to missiles and bombs, and has a few weak spots that aren't covered with armor.
Sleek, simple, and beautiful. A great looking build. Good job on minimizing that part count. The plane looks like it should have double the part count.
@AfterShock I'm not the one to ask about the cockpit. @Ephwurd designed the cockpit.
@Viper No, Ephwurd calls his fictional universe the Continuum.
+1@MechWARRIOR57 @TTHHSSSS Thanks! The desc has been completed.
@DestinyAviation Thanks!
@Joco80 Scale the exhaust for some engines to be long and skinny, and then put them over an exhaust that was scaled to be disk shaped.
@Joco80 There is some modding involved, but the modding isn't the easy part. All you do with the modding is scale the engine exhaust. The rest is aligning and scaling the engine exhaust so it looks like crosshairs.
Probably the best build with the replica tag on the website lol (jokingly). But real talk, this is awesome and it amuses me. Great job.
Mostly what @RailfanEthan said. Ccooper always made single engine prop planes. They were, in one word, fine. Not bad, but not great either. I'm not sure why he got so much backlash, even if he did only make mediocre builds that were repetitive.
Nice. Very precise, I haven't downloaded it yet, but I definitely will later.
Disable the mods, then log into your account in the share aircraft feature. Putting your SP account into the upload aircraft window cannot be done with mods installed, to make sure that no one steals your login info.
Ooh, this looks good.
@Swiftsure Yes, I am designing it as a concept (the curves and the structure overall would most likely be impractical due to how hard it would be to construct). The building isn't designed for any specific use.
@TheDoodleBanger Sure, go ahead!
@PyrusEnderhunter Sure, what do you need help with?
Could you re-link me to the collab build? I have been incredibly busy and might have some time to add to the build.
@TheNCRranger Grab the cockpit, but it is nearly impossible to drag the intact escape pod into your subassemblies.... I would suggest just building around the escape pod.
+1@TheNCRranger Maybe put your physics to a higher level, or redownload the plane.
@TheNightmare811 Damage, as in caliber? I think that works too, but the numbers need to be excessively high.
@TheNightmare811 Modded bullet speed can pierce through the armor. Also, heavy bullet weight can knock the aircraft around.
@Rohan mmm, forgot about that
@Rohan hehe, a joke i assume, but some might interpret that as something else. I also will use some (educational versions) of autodesk products, specifically inventor and revit.
@MechWARRIOR57 Yes, I think my builds prove that statement.
I think KDS already said this, but download the fine tuner and overload mod. They make the possibilities for your creations endless.
@TheDoodleBanger My first idea came from a bug in an aircraft where the guns were nudged too close to the craft, so the bullets would hit the craft in such a way that the craft would lurch forward before exploding. So then I knew that bullets could propel a craft, but I couldn't make an engine, because it would explode. Months later, I found out that parachutes were immune to bullet damage. I made an armored aircraft, and then I finally made the impulse engine with XML modded guns that had large weight, shooting at a parachute.
@TheDoodleBanger I don't like to make replicas, so probably no.
@PyrusEnderhunter Haha, thanks! I have finished the desc.
@MrTyTheGreat Haha, thanks! Could you send a link to a picture of the print? (when it is done, of course) I would greatly appreciate it.
@TheNCRranger Missiles can be intercepted with bullets. You can make a shotgun by XML modding a gun's fire rate and bullet spread, or you can use the fine tuner mod to make a multi-barreled gun that shoots bullets in definite angles.
Nice. Let me know when you are finished.
@TemDesBur Not only does it look like it, but the parachutes also absorb bullet damage much like armor. Thanks!
@AfterShock Im not sure about how it could be crash resistant. Its not that it is resistant to impact, rather, it just cannot take damage from bullets, until the bullets move fast enough for an actual impact (which is much faster than a normal minigun bullet).
@MrSharp Yep. A few days ago I discovered that parachutes were invincible to (Unless if bullet speed and caliber are modded to be crazy) bullet weapons. My first course of action was to make armor. After that, I made this. This is a really simple contraption. The only thing modded abut the gun is its bullet weight, which makes sense, because if the bullet has no weight, then it wont push.
Great! Thanks for testing it out on a plane! Its good to see that it works quite well, too!
@zealt Awesome. Tell me when you finish.
@AnonyMoose Thanks! Could you also link me to your design? I would like to take a look at it. Also, I have finished the desc.
@saturn28 @EternalDarkness Thanks! I have finished the desc.
@TheNCRranger Unfortunately it doesn't work on misssiles, but no worries, there are plenty of ways to evade or intercept missiles.
@TnTDestroyer You predicted the concept that I am going to post in a few hours.
Edit: I started the concept right as I finished this armored aircraft.
@Ephwurd Ok, I think I'm ready.
@Supercraft888 Speed is great, but it doesn't help too much against the beast fleet or a convoy that takes a few passes to destroy.
@Supercraft888 The chassis will be the only thing left, and the plane will loose control., since the CoM will shift.
@Sarpanitu Sounds like a good idea. I might try that.
@cobalT Yes, those are parachutes.
@zackattack316 AH! I forgot to put that in the desc! Thanks for reminding me!
@zackattack316 Thanks! Also I have posted an aircraft that uses the armor plates. It gives it a rugged, puffy appearance.
@Dllama4 Also if you want to see an example of the armor on a plane, I have just posted this.
@DatGuy117 Thanks! I have also put this concept into motion by making an armored plane.
@CALVIN232 @marcox43 @CRAZYONE1423 I have posted a plane with this armor. You can find it here. Thanks!
@Visify Yes, its armor soaks up minigun shots, bullets from AA tanks, and bullets from destroyers. It is, however, vulnerable to missiles and bombs, and has a few weak spots that aren't covered with armor.