@DuckMint no need for an actual road, just a dirt road similar to rattlesnake but half the road wide. but needs to have a smooth surface so cars with real life size won't get stuck by a bump
maybe we could use 1:1 planes, cars, etc for the new image, either fictional or replica, so it represents the actual state of the game(I hope replaicas with logos don0t get copyrighted tho, like Audi's and such...
@Winstonlharambe at some point I had to re-make my patrol boat, it saw wide service in the Jundroo war two years ago, and I was lacking the skill to do it until now :3
@Winstonlharambe I do have the base chassis if that's what you want, although it doesn't feature the last minute upgrades(anti roll bar and shortened springs) :3
@Sulaiman123 because It's a car that I made a long time ago and took quite some effort to do it, besides, it competed in a tournament, but crashed due to bad timing and terrible AI. My dad has an 86' Mercedes benz w124 260E, wich is currently in repairs by me and my brother(as soon as we finished re-making the automatic tranny, the distributor rotor bolt broke and it got stuck in the camshaft, wich is a pain in the ass :D)
Yes!!!!, I really love that plane, just a small tip, the rear elevator is only for Trim, this plane has elevons, just as the Ho229, so the roll is also pitch, and the other ones are flaps. here's a link to a WarThunder forum, you can find lots of info about the plane there, since we've wanted that plane since game release but never got it. linky link
move main landing gear forwards just a bit behind the center of mass, and maybe enlarge the cockpit for better visual area. and put some details too. the reast is very good!
@ZHUAREVONI the wings are hidden inside the fuselages that mimic a real wing.
I know about the symetric problem, I put semi-symetric on the wingtips for the new one to compensate, although heavy use of Trim(new feature to come) is required.
So it's a 60's design type...hmm, interesting. that might come in handy with the new decals.
@ZHUAREVONI ok, I'll take note, although engine power nerf would be not a good idea, considering the competition(current power is twin 21000lbf engines, same as the A-6 Intruder), but I'll try messing with all the other stuff and see how it goes. thank you very much for your feedback!
@CDRxavier I'm sorry for it T-T, but the place where that sponsor goes(upper fender) is very tiny, and i was already quite tired after working on the car for more than half a year... pdt: the interior was rushed in no more than 3 hours xd
@WeSeekANARCHY no worries, It's a car that I've been developing for at least half a year, and it will have +700 parts when the interior is done. I primarily worked on the chassis, since I needed it to be as clsoe to irl as possible in therms of shape and handling(the most difficut part). i can tag you tho If you want to take a ride on it.
@JoshuaW hmm... well, I do have a piston engine that revs up to 856RPM, but torque is a bit low, my idea was to scale down the gears to 0.0625 so I could fit them in a gearbox small enough for the engine, but I was having truoubles with high RPM as the game loves to glitch and pull away the gears at high speed. I'll tag you in my engine
it has been years since I last saw a dragon on this site!
+1@DuckMint no need for an actual road, just a dirt road similar to rattlesnake but half the road wide. but needs to have a smooth surface so cars with real life size won't get stuck by a bump
+1maybe we could use 1:1 planes, cars, etc for the new image, either fictional or replica, so it represents the actual state of the game(I hope replaicas with logos don0t get copyrighted tho, like Audi's and such...
+1nice vrhicle mate, long time no see
+1@TheblueRobotProduct @SakuraSaku @Griffinthedragon thank you very much!
+1@Winstonlharambe at some point I had to re-make my patrol boat, it saw wide service in the Jundroo war two years ago, and I was lacking the skill to do it until now :3
+1tried to land it on my patrol boat, it nearly sunk my ship by just landing due to weight...
+1M.A is ready to provide aircraft support, with the both combat proven M.A Raven and M.A red arrow, being 5th and 3rth gen respectively
+1@mikoyanster Only operational plane with working flaps atm(with custom control surfaces)
+1@Winstonlharambe I had to reduce throttle in the straight because you car jumps all over the place lol
+139 seconds with the H7F S1 at 55% fuel mixture
+140 seconds in my Audi quattro S1
+1let's make it an official rally championship and each one post a video about it!
+1needs better grip and maybe some shock absorbers on the feets, but very interesting concept!
+1@hopotumon thank you very much, guess I'm back to fighter challenges hehehe
+1@Spikerya thank you very much! will you join the challenge?
+1@Winstonlharambe I do have the base chassis if that's what you want, although it doesn't feature the last minute upgrades(anti roll bar and shortened springs) :3
+1@Winstonlharambe thank you very much! I really apreciate it! >w<
+1can we have more than one entry?
+1can we nudge parts?
+1somehow it looks like a samurai lol
+1@Sulaiman123 because It's a car that I made a long time ago and took quite some effort to do it, besides, it competed in a tournament, but crashed due to bad timing and terrible AI. My dad has an 86' Mercedes benz w124 260E, wich is currently in repairs by me and my brother(as soon as we finished re-making the automatic tranny, the distributor rotor bolt broke and it got stuck in the camshaft, wich is a pain in the ass :D)
+1@JohnnyBoythePilot thank you very much! hope you enjoy the aircraft and good luck on the BNRV contract
+1Looks really amazing, also it seems like the competition for the BNRV contract seems tougher every week hahaha
+1jokes aside, I check SP like 4 times more often than my facebook xd.
+1Merry christmas mate, cheers!
Yes!!!!, I really love that plane, just a small tip, the rear elevator is only for Trim, this plane has elevons, just as the Ho229, so the roll is also pitch, and the other ones are flaps. here's a link to a WarThunder forum, you can find lots of info about the plane there, since we've wanted that plane since game release but never got it. linky link
+1I think I saw this thing flying on the MP yesterday...
+1@JohnnyBoythePilot np, things like this are very useful and hard to find
+1@randomusername @ACEPILOT109 thank you very much guys, I hope you enjoy this engine(quite underpowered, but good for light tasks)
+1@Caveman999 this car, is an interesting concept, a box, and also related to the video
+1move main landing gear forwards just a bit behind the center of mass, and maybe enlarge the cockpit for better visual area. and put some details too. the reast is very good!
+1@tylerdeveneuxmusic @BlackhattAircraft thank you very much guys!
+1@BaconRoll plane is up, now I need to add the description, but first, I'll go wash the dishes xd
+1@ZHUAREVONI the wings are hidden inside the fuselages that mimic a real wing.
+1I know about the symetric problem, I put semi-symetric on the wingtips for the new one to compensate, although heavy use of Trim(new feature to come) is required.
So it's a 60's design type...hmm, interesting. that might come in handy with the new decals.
@ZHUAREVONI ok, I'll take note, although engine power nerf would be not a good idea, considering the competition(current power is twin 21000lbf engines, same as the A-6 Intruder), but I'll try messing with all the other stuff and see how it goes. thank you very much for your feedback!
+1np, take your time
+1@CDRxavier I'm sorry for it T-T, but the place where that sponsor goes(upper fender) is very tiny, and i was already quite tired after working on the car for more than half a year... pdt: the interior was rushed in no more than 3 hours xd
+1@XjayIndustrys thank you very much!
+1@tylerdeveneuxmusic >w< looking forward to that Lancia!
+1@TakicraftCorporation thank you very much mate, see you in the race!
+1@tylerdeveneuxmusic @munchakoopa @destroyerP thank you very much guys!
+1@RailfanEthan @Spikerya @Hayhayjam664 thank you very much for the spotlight!
+1@Hayhayjam664 thank you very much! >w<
+1@WeSeekANARCHY yeah xdd, I posted it at like 2AM
+1@WeSeekANARCHY no worries, It's a car that I've been developing for at least half a year, and it will have +700 parts when the interior is done. I primarily worked on the chassis, since I needed it to be as clsoe to irl as possible in therms of shape and handling(the most difficut part). i can tag you tho If you want to take a ride on it.
+1@JoshuaW hmm... well, I do have a piston engine that revs up to 856RPM, but torque is a bit low, my idea was to scale down the gears to 0.0625 so I could fit them in a gearbox small enough for the engine, but I was having truoubles with high RPM as the game loves to glitch and pull away the gears at high speed. I'll tag you in my engine
+1@Sarnnox thank oyu very much!
+1have fun there mate! I'll try to join when I have money to buy the game xd
+1@Hayhayjam664 @AchuTMM @KidKromosome Thank you very much guys, really apreciate it <3
+1@Spikerya it had like 50 until I started adding details xd
+1