@Panthers4741 I feel that it would be hard to make the upper windows properly, since they are slanted weirdly. I might have to use a new paneling technique. The entire fuselage and upper deck will need to be paneled for the inside to look proper. ++ parts. Any request for liveries?
@Panthers4741 The most part-intensive region of any aircraft with interior is the seats. 344 seats on the 747, and with the current seats I have, (no part count savings) the seats alone would be 9200 parts. I might need to make each seat about 10 parts if I'll even have a chance of making them all fit. that way they're only 3440 parts. then I could make the rest of the airplane 4034 parts, bringing the total to 7474. Cockpit on the 757 is about 3,000 parts, and I bet I could reuse a lot of the dials, switches, ETC to make the 747 much easier to build.
@Panthers4741 747 sounds nice, I haven't seen a 5000 part version here. I might make a really detailed one with full interior. The interior is the easy part, except for the spiral staircase. The cockpit is the harder part. I'll think about the 747 nose and experiment a little bit. If I can get a good nose shape I'll try.
@rexzion trust me, the next plane will be a lot better. This one is definetly my best so far, but I'm looking forward to creating a 6666 part airliner soon! (AKA 4 months)
Beautiful, extremely well done, attention to detail is amazing, everything is amazing, AMAZING. I know I already commented here, but you deserve it. Can I get your system specs and FPS while running this?
@SKYLINESTUDIO Very nice! However I do have a few things to fix:
The aircraft is a bit too low to the ground.
The cockpit shape is not quite accurate.
For the amount of points you have, this build is very good.
@MrSilverWolf cool concept! By any chance, do you know how to triangulate wings to get smooth shapes like Here (check out the third image in thumbnail)
@DerVito it's your graphics card, I have a 6GB GTX 1060.
@Hedero thank you!
@Boeing777x thanks for the kind words! This took all summer to make, and I'm glad my time wasn't wasted!
@EternalDarkness Hi, the only thing that didn't get finished is AG5 (autoland) and the back part of the cockpit. Autoland is unnecessary and the cockpit would crash if I added more. Flight speeds are realistic, fine-tuned to be as close as possible to the real thing. It does fly accurately.
I did not plan on the aircraft being exactly 4500 parts, but here it is.
System requirements- I5 6400 or better, GTX 1060 6gb or better.
Recommended: Infinity
Recommended settings: all maximum, MSAA X8, real-time reflections.
Yes, there are some small issues, but real life must come before SP. I am leaving to boarding school nine hours after making this comment, haven't packed and haven't slept. I cannot fix everything, though I wish I could.
@Panizon Yep. This single component has more parts than entire aircraft! My goal is 4321 or 4444 parts. It will be released on Thursday. (August 6)
@asteroidbook345 Thank you!
@SodiumChloride
this- 1082
Wings-900 (yes, the wings are 450 each)
Rest of cockpit so far- 1771 (overhead panel is 1000, main panel is 770)
Fuselage-200 (relatively simple)
3953 parts, you're right I will not make the 4000 part goal, new goal is 4321.
@asteroidbook345 Correct, three days till post. I will actually post on Thursday, because I'll be flying on Jetblue back to school early morning on Friday. Expect post late Thursday, between 5pm-12pm est. I don't have time to make RB211 before release, but I might be able to do it later in the year.
@TheKugelblitz This will not run on any phone, most likely not even an iPhone 11 Pro Max. Try and borrow your parents' pc. As long as you have an I5 6th gen+ and a GTX 1060 6GB+, you can run this fine. 8GB RAM is recommended, as this plane's model is actually a higher amount of MB than FSX/P3d Airplane models. There will be a system requirements page for those wondering. @FireFast212 Go ahead and send.
@TheKugelblitz Yes, the complete model so far has 3200 parts, and the cockpit and details are not finished.
@CRJ900Pilot
-Landing gear wobbles, but it won't be an issue because that part will be covered. I did increase mass.
-smoothing it out now.
-Thinned!
-Intake fixed, working on exhaust now, I know what you mean
-fighting fixed, I didn't know it was visible outside the editor.
rotators hidden, I'll work on making the landing gear more realistic now.
@Thecatbaron Changing it now, thanks for the feedback! Really appreciated! I don't know how to "triangulate" the wing so I did it this kinda weird way. I might do a redo of the wings this Christmas, because some parts of the outboard flaps are a bit off.
Please let me know if there is anything I can improve. The final aircraft will be released in six days, and will have about 4000 parts. This is the PW2000 version, would you guys also want an RB211 version?
@Thebigassflyer Just make sure you pay as much attention to detail as possible. Use reference images from multiple angles, and make sure every single screw and switch is accurately done.
@FinnReignSUPREME The livery is very good but I believe everything else is a bit off. Landing gear retraction, tilt, and strut covers are not correct, cockpit has ?4? thrust levers, tail and engines are quite off in shape, etc. This is an Airbus, why does it have a yoke?? Ailerons point the wrong way when turning. I think you could make much better builds if you focus more on the model. It looks great from the screenshots and has very good livery, but once you start to fly it, it kinda falls apart since it has 3.9K parts and has basic things wrong like yokes AND sidesticks.
@Panthers4741 I feel that it would be hard to make the upper windows properly, since they are slanted weirdly. I might have to use a new paneling technique. The entire fuselage and upper deck will need to be paneled for the inside to look proper. ++ parts. Any request for liveries?
@piglin haha cockpit alone is 3k
@Panthers4741 The most part-intensive region of any aircraft with interior is the seats. 344 seats on the 747, and with the current seats I have, (no part count savings) the seats alone would be 9200 parts. I might need to make each seat about 10 parts if I'll even have a chance of making them all fit. that way they're only 3440 parts. then I could make the rest of the airplane 4034 parts, bringing the total to 7474. Cockpit on the 757 is about 3,000 parts, and I bet I could reuse a lot of the dials, switches, ETC to make the 747 much easier to build.
@Panthers4741 747 sounds nice, I haven't seen a 5000 part version here. I might make a really detailed one with full interior. The interior is the easy part, except for the spiral staircase. The cockpit is the harder part. I'll think about the 747 nose and experiment a little bit. If I can get a good nose shape I'll try.
@TiFosiF Very good job with the hump and nose, good detail for such low part count!
@rexzion trust me, the next plane will be a lot better. This one is definetly my best so far, but I'm looking forward to creating a 6666 part airliner soon! (AKA 4 months)
Beautiful, extremely well done, attention to detail is amazing, everything is amazing, AMAZING. I know I already commented here, but you deserve it. Can I get your system specs and FPS while running this?
@SKYLINESTUDIO Very nice! However I do have a few things to fix:
The aircraft is a bit too low to the ground.
The cockpit shape is not quite accurate.
For the amount of points you have, this build is very good.
@MrSilverWolf cool concept! By any chance, do you know how to triangulate wings to get smooth shapes like Here (check out the third image in thumbnail)
@TiFosiF Very nice, but it would be great if you made the CFM engines instead. It would add an extra level of realism.
@LostCausesIncorporated just make the number super high or attach the maximum angle to the time function or something, IDK
Why, are you mad cause you're bald?
@EternalDarkness thanks a lot for the feature, it's my first!
@DerVito it's your graphics card, I have a 6GB GTX 1060.
@Hedero thank you!
@Boeing777x thanks for the kind words! This took all summer to make, and I'm glad my time wasn't wasted!
@EternalDarkness Hi, the only thing that didn't get finished is AG5 (autoland) and the back part of the cockpit. Autoland is unnecessary and the cockpit would crash if I added more. Flight speeds are realistic, fine-tuned to be as close as possible to the real thing. It does fly accurately.
@Wallaby Maybe you can run it fine!
@CRJ900Pilot Thank you very much, feels good to have so many kind words!
@TheSavageManZ
@TheKugelblitz
@ACEPILOT109
@asteroidbook345
@jelybaca
@BigChunguss
@P0TET0Z
@Noname918181
@Thecatbaron
@CenturyAerospace
@WereOutOfNames
@2Papi2Chulo
@PointlessWhyShouldi
@DerVito
@CrushburnHQ
I did not plan on the aircraft being exactly 4500 parts, but here it is.
System requirements- I5 6400 or better, GTX 1060 6gb or better.
Recommended: Infinity
Recommended settings: all maximum, MSAA X8, real-time reflections.
Yes, there are some small issues, but real life must come before SP. I am leaving to boarding school nine hours after making this comment, haven't packed and haven't slept. I cannot fix everything, though I wish I could.
@PlaneFlightX Thanks!
@Wallaby I can run it at 25 FPS medium settings, 20 high.
@metaphysicalgnome updated by comment below, it will not run on your phone. It needs a device with a dedicated graphics card. GTX 1060+
@metaphysicalgnome a few hours, before midnight est, it will not run on your phone. It needs a device with a dedicated graphics card.
@metaphysicalgnome Yes if you have I5 6400 or better
@metaphysicalgnome 4107 so far
@Raptor787 ofc
@Panizon Yep. This single component has more parts than entire aircraft! My goal is 4321 or 4444 parts. It will be released on Thursday. (August 6)
@asteroidbook345 Thank you!
@SodiumChloride
this- 1082
Wings-900 (yes, the wings are 450 each)
Rest of cockpit so far- 1771 (overhead panel is 1000, main panel is 770)
Fuselage-200 (relatively simple)
3953 parts, you're right I will not make the 4000 part goal, new goal is 4321.
@Hedero Thank you very much. It is actually 1/4 of the airplane's part count.
@Userofplanes Absolutely. 4000 parts.
@asteroidbook345 yeah I've been trying to fix that but I can't. I'm not sure how to, but I'll keep trying.
@asteroidbook345 They do, you'll be fine, read the pinned comment for system requirements.
@Panizon Idk it will need to be an easy one cause I'm running out of timeeeee Might just do delta
@asteroidbook345 Correct, three days till post. I will actually post on Thursday, because I'll be flying on Jetblue back to school early morning on Friday. Expect post late Thursday, between 5pm-12pm est. I don't have time to make RB211 before release, but I might be able to do it later in the year.
@TheKugelblitz I can't make an 800 part version, the wings alone are 900 parts. And if I take things off, they will look REALLY bad.
@TheKugelblitz This will not run on any phone, most likely not even an iPhone 11 Pro Max. Try and borrow your parents' pc. As long as you have an I5 6th gen+ and a GTX 1060 6GB+, you can run this fine. 8GB RAM is recommended, as this plane's model is actually a higher amount of MB than FSX/P3d Airplane models. There will be a system requirements page for those wondering. @FireFast212 Go ahead and send.
@Panizon I've been busy with high school, doing my senior year this year.
@Panizon The minimum I can make on the 757 is about 1200-1500, you'll be fine in that case!
@FireFast212 If you look at my profile, you can find some things that I've been doing step by step. What do you need help with exactly?
@CRJ900Pilot check description, it's already done.
@TheKugelblitz Yes, the complete model so far has 3200 parts, and the cockpit and details are not finished.
@CRJ900Pilot
-Landing gear wobbles, but it won't be an issue because that part will be covered. I did increase mass.
-smoothing it out now.
-Thinned!
-Intake fixed, working on exhaust now, I know what you mean
-fighting fixed, I didn't know it was visible outside the editor.
rotators hidden, I'll work on making the landing gear more realistic now.
@Panizon Not really, maximum parts about 900, I can give you that if you want.
@Thecatbaron Changing it now, thanks for the feedback! Really appreciated! I don't know how to "triangulate" the wing so I did it this kinda weird way. I might do a redo of the wings this Christmas, because some parts of the outboard flaps are a bit off.
Please let me know if there is anything I can improve. The final aircraft will be released in six days, and will have about 4000 parts. This is the PW2000 version, would you guys also want an RB211 version?
@Thebigassflyer Just make sure you pay as much attention to detail as possible. Use reference images from multiple angles, and make sure every single screw and switch is accurately done.
@FinnReignSUPREME The livery is very good but I believe everything else is a bit off. Landing gear retraction, tilt, and strut covers are not correct, cockpit has ?4? thrust levers, tail and engines are quite off in shape, etc. This is an Airbus, why does it have a yoke?? Ailerons point the wrong way when turning. I think you could make much better builds if you focus more on the model. It looks great from the screenshots and has very good livery, but once you start to fly it, it kinda falls apart since it has 3.9K parts and has basic things wrong like yokes AND sidesticks.
Second Airliner ever to 300... 2:05AM UTC, Tuesday, July 21, 2020