@YourWife Thanks for your patient advice, it helps me a lot to improve
I've now downloaded and flown it, and I'm ready to give my critique.
Pros:
Absolutely stunning detail and livery. Thanks
The construction and physical shape is beautiful, very well made, and stays very true to the original design
The mechanical part of this aircraft is truly incredible. Using as many as over 100 rotators on an aircraft really shows the amount of effort put into it.
The afterburner exhaust looks great
The yawing motion doesn't roll the plane and its actually effective at turning
Cons:
The weight is entirely inaccurate, should be roughly 150 tons that's right, I did not think too much about the weight
It's also larger than the real thing, which is 202 ft long, 40 ft tall, and with an 84 ft wingspan Actually you can see all the part were double-size than the usual, I make the entire plane larger when I almost done
The weight causes it to accelerate multiple times faster than a Tesla car right, because the VTOL engine is so powerful, but it is necessary to maintain a high cruise speed, I will not appreciate opening the afterburner all the time. In fact, I mix the power of the VTOL engine with the power of the ordinary small jet engine to achieve the best effect.
Completely stops when engine power is cut drug, drug can be scary in such a huge aircraft
There's no suspension at all in the landing gear this is true, but also not true. The front landing gear has one. When I try to add a suspension system to the rear wheel, it always jitters, it might not endure that pressure, so I have to cancel it and use six pistons to stabilize it (three of it on each side, I hide it but you can still find it) and deal with the problem.
Roll rate is painfully slow, had a hard time adjusting my orientation to land yes, but I think the roll should not be so sensitive especially on a low wing-span passenger plane
Nitpicks and small issues:
There are no navigation lights on the wing you mean the blinking light? It has on each side of the wing, and even one on the tail
The trailing edge at the base of the vertical stabilizer is flat instead of like it is at the tip
The landing lights that fold out stay out when 7 is turned off, an issue I've encountered and know how to fix I do not have extra Activity group to control the folding light, so I use the landing gear group, that is why I called it "Landing Gear Linkage System"
The control surfaces don't entirely line up with the wing where they attach yes, especially on the edge of the wing, I noticed that
Overall, you did an amazing job on building and shaping it, but part of a SimplePlanes build is the flight experience. Paying attention to that is important for those who download and want to fly it. I do understand being finished with this project you probably don't have much motivation to work on it more, and i very much understand that. So I'll offer my own revision based on my critique, if you allow me to. well...you could make a try, but I have hidden all the rotators, it might be even harder to make a change based on it than build another plane
Call of Duty 6 Modern Warfare2
+1@BaconRoll ahaha, I don't want to be square
+1@ThomasRoderick I want to, but the trap is very complex
+1God, what’s a terrible joke
+1Btw, I never heard something like that.
(Just kidding)
@realluochen9999 @FastDan
Sure, I will change the size when I finish it @randomusername
+1@Strikefighter04 okay，u are right
+1One of the greatest creation！
+1@F104Deathtrap ahaha，Just stay at this point！;D
+1大佬
+1@BaconRoll okay
+1@BaconRoll thanks a lot！
+1WEBW is full of 人才
+1haha，my laptop is still alive!@lonejam472155
+1D-tail！
+1@aircraftarsenal123 Agree with you
+1I really love this car,simple but amazing
@RussianAS haha，I see，Actually I'm Chinese ;)
+1I love it!
+1Well...your school is close to a high mountain?
+1thanks
+1District-9@XjayIndustrys
@NANOMAN yes, my Laptop almost getting fire...
+1@TheNightmare811 :)
+1nice work！but...1733 parts...how ?
+1@RYANF34 thanks！
+1@ThomasRoderick interesting ...because the scan laser is gun bullet :)
+1@TTHHSSSS ahaha，thx！
+1@BaconEggs Farewell, my friend. I won't delete my account, because I'll be BACK！！
+1比之前的黄涂装要好看诶！
+1才255parts...
+1NICE
这么高级？现在已经可以用速度范围来input转轴了？
@Rexxtasd @Natedog120705 Thanks!!
Pretty cool
@Ryn176 what! You saw me, it seems that I can only destroy you.
@QingyuZhou 正是，前几天去的
@toxicgamer88 @ainanen Thanks
@TheFantasticTyphoon @ColonelStriker Thank you guys, but the problem is the Dev cannot feature someone who's higher than 25K
@Lyra @Jfalix @Georgereese1113 Thanks!
@YourWife Thanks for your patient advice, it helps me a lot to improve
I've now downloaded and flown it, and I'm ready to give my critique.
Pros:
Absolutely stunning detail and livery.
Thanks
The construction and physical shape is beautiful, very well made, and stays very true to the original design
The mechanical part of this aircraft is truly incredible. Using as many as over 100 rotators on an aircraft really shows the amount of effort put into it.
The afterburner exhaust looks great
The yawing motion doesn't roll the plane and its actually effective at turning
Cons:
The weight is entirely inaccurate, should be roughly 150 tons
that's right, I did not think too much about the weight
It's also larger than the real thing, which is 202 ft long, 40 ft tall, and with an 84 ft wingspan
Actually you can see all the part were double-size than the usual, I make the entire plane larger when I almost done
The weight causes it to accelerate multiple times faster than a Tesla car
right, because the VTOL engine is so powerful, but it is necessary to maintain a high cruise speed, I will not appreciate opening the afterburner all the time. In fact, I mix the power of the VTOL engine with the power of the ordinary small jet engine to achieve the best effect.
Completely stops when engine power is cut
drug, drug can be scary in such a huge aircraft
There's no suspension at all in the landing gear
this is true, but also not true. The front landing gear has one. When I try to add a suspension system to the rear wheel, it always jitters, it might not endure that pressure, so I have to cancel it and use six pistons to stabilize it (three of it on each side, I hide it but you can still find it) and deal with the problem.
Roll rate is painfully slow, had a hard time adjusting my orientation to land
yes, but I think the roll should not be so sensitive especially on a low wing-span passenger plane
Nitpicks and small issues:
There are no navigation lights on the wing
you mean the blinking light? It has on each side of the wing, and even one on the tail
The trailing edge at the base of the vertical stabilizer is flat instead of like it is at the tip
The landing lights that fold out stay out when 7 is turned off, an issue I've encountered and know how to fix
I do not have extra Activity group to control the folding light, so I use the landing gear group, that is why I called it "Landing Gear Linkage System"
The control surfaces don't entirely line up with the wing where they attach
yes, especially on the edge of the wing, I noticed that
Overall, you did an amazing job on building and shaping it, but part of a SimplePlanes build is the flight experience. Paying attention to that is important for those who download and want to fly it. I do understand being finished with this project you probably don't have much motivation to work on it more, and i very much understand that. So I'll offer my own revision based on my critique, if you allow me to.
well...you could make a try, but I have hidden all the rotators, it might be even harder to make a change based on it than build another plane
@TheXDimension32 I am going to write an essay about dat, please wait for few days
@GabetheDoge sorry about dat...it shouldn’t be happen
@DeidaraEnterprises thanks
@TheXDimension32 Differential Rotators Tech, I think it is not a new tech. But I discovered it by myself
@WIZARD2017 帅啊，看样子能垂直起降？
@WIZARD2017 诶嘿嘿(๑≧∀≦๑)
@SakuraSaku 顺便说一下，这个驾驶舱是真的强，我造AATIS的时候也搞过类似的，知道很难弄，尤其是细节部分
@WIZARD2017 这里
@WIZARD2017 嗯嗯，我当天还穿了一件协和的衣服呢c(ˆωˆc)
@Marine Thanks
@YL 嘤嘤嘤 (,,•́ . •̀,,)