@Object775blyat this is a bit tricky, firstly connect the wheel to an engine, then open up XML for the wheel
.
go to "ResizableWheel" tab (i think this is the name) and find variable with this name: "maxAngularVelocity"
.
the default value is 300 (i suppose), now adjust this value to your desired speed, i recommend around 50 or below to get speed below ≈150km/h
you need to use a formula to calculate the exact value to get the top speed you wanted, i forgot what formula it is
@KAIST it is possible, i tested it myself with some FT wizardy, although it has a bit of delay when its correcting itself when the tank is turning
.
i found gyroscope is much simpler, and has a better response than FT stabilization
@BARREND120 not working?
impossible, i tried it and it worked
check for each one:
• have you put the "rev"name in ActivationGroup attribute on the engine?
or atleast its similar to the name of the variable
• have you set the "zeroToDeactivate" attribute to true, or atleast delete it ? (bc the attribute will disappear if it's set to True)
• or it might be from the FT itself
check if theres abnormalities on it
or for atleast try to tell me whats the problem, i could help you
@BARREND120 you can use this:
put "rev" on activation input on the engine, make sure "zeroToDeactivate : false" attribute is deleted
then go to variable setter, put name the same as you put it on the engine (rev), then put this :
(Trim <= -0.005) & GS>1.5 ? 0 : 1
on the value
you could change the input to be Pitch, VTOL or anything else
to adjust the reverse speed, change the value after the "GS>"
it will limit the speed of reverse, very cool
please note this, this Stryker has high CoM, so its prone to flipping on high speed turns
its better to lower your height using the hydro suspension or just slow down while turning
@DiesenAndCornel sounds reasonable, but you dont need to said that to yourself like that
everyone has their own uniqueness, as for what you just said, i do sometimes think to myself what am i good at, or am i even have anything unique at all that makes me different than others
@Mal0ne that autoreconnection part mech made me develop mental illness just by using it 💔
@Mateoooo well, i might make one
but i will take it as a suggestion
@Object775blyat yep
you probaly havent set it to the highest of all time, you only set it to "this year" only
@Mal0ne genuinely i thought you were replying to yourself 💔
im gonna be honest, i can smell the individual pixels in the thumbnail from far away
@Object775blyat this is a bit tricky, firstly connect the wheel to an engine, then open up XML for the wheel
.
go to "ResizableWheel" tab (i think this is the name) and find variable with this name: "maxAngularVelocity"
.
the default value is 300 (i suppose), now adjust this value to your desired speed, i recommend around 50 or below to get speed below ≈150km/h
you need to use a formula to calculate the exact value to get the top speed you wanted, i forgot what formula it is
@Zero0Two2 sure, go ahead
actually i have made my own 120S, but i wanna see yours
@KAIST it is possible, i tested it myself with some FT wizardy, although it has a bit of delay when its correcting itself when the tank is turning
.
i found gyroscope is much simpler, and has a better response than FT stabilization
@Randomplayer holy meat rider
@Object775blyat its the best i can do, and also it has interior so its kinda acceptable
@SumateraIndustries hell yeah 🔥🔥
and yes that's what differs my builds from others, it has interiors closely match to real life
@Th3Missil3 i believe you didnt read the description fully to know that there is an interior on this M60A1 i build, didnt you ? 😏
@DJRianGamerTheHololiveFan YEAHHHHHHH
@EagleMan010
@novaskytwt
@Winko
@HordTechnicians
@FLANEFANCY1235
@DeeganishCountryball
@SuperSuperTheSylph
@Rob119
@NEOCORP
@DJRianGamerTheHololiveFan
@Rjenteissussy
@M109simp
@MrOofington
@Christiant2
@TheMouse
@SLSD11ph
@Zero0Two2
@MonsNotTheMonster
@Apollo018362
@BYardley
@YarisHatchback
@Hahahahaahahshs NOOOOOOOO 😭😭😭😭😭😭😭
Hey you dropped a pin, can i have it ? 🥺🥺🥺
ooh you're putting descriptions now
nice
@Graingy oh wow, you're absolutely right
but not really, i based it off the M60A1, specifically the AOS variant
@Kg2013 i mean it kinda shares the same design, thats why i said it as a rip off
@BARREND120 ah alr
i recognized that 155mm gun
its mine :D
@BARREND120 well yk what
ill just add it myself, its not that hard right ? 😗
whoa, i like
but this T-90 doesn't have atgm?
i thought it does
amx-13 ripoff
raid poland all over again
i make plen
and ship
and tanks
mostly tanks now
my builds are mobile friendly , yes
@MAHADI you just.. gotta believe that it will get in there somehow
@MABURv2 sounds reasonable
i think the side skirts have better armor againt CE than the front armor
12 hours has passed, and i didnt know the earth has exploded 11 hours 55 minutes ago
@xNotDumb how.. ironic
@BARREND120 not working?
impossible, i tried it and it worked
check for each one:
• have you put the "rev"name in ActivationGroup attribute on the engine?
or atleast its similar to the name of the variable
• have you set the "zeroToDeactivate" attribute to true, or atleast delete it ? (bc the attribute will disappear if it's set to True)
• or it might be from the FT itself
check if theres abnormalities on it
or for atleast try to tell me whats the problem, i could help you
@SakiSenArmyIndustries well, you could use the VR seat to compare it, it would make more sense to the real life scale
@BARREND120 you can use this:
put "rev" on activation input on the engine, make sure "zeroToDeactivate : false" attribute is deleted
then go to variable setter, put name the same as you put it on the engine (rev), then put this :
(Trim <= -0.005) & GS>1.5 ? 0 : 1
on the value
you could change the input to be Pitch, VTOL or anything else
to adjust the reverse speed, change the value after the "GS>"
it will limit the speed of reverse, very cool
not bad, i like the shape of it
wowowowowoow PLANE
wher normal chally 2
i n e e d i t
please note this, this Stryker has high CoM, so its prone to flipping on high speed turns
its better to lower your height using the hydro suspension or just slow down while turning
@Kryos thank you 🙃
@DiesenAndCornel sounds reasonable, but you dont need to said that to yourself like that
everyone has their own uniqueness, as for what you just said, i do sometimes think to myself what am i good at, or am i even have anything unique at all that makes me different than others
as a matter of fact, the FT magic isnt mine, i kinda "stole" it, but thanks for crediting me anyway
@TheCommentaryGuy well, id say it is
but ill consider it