@BOSKnight no. Do not pursue war with @Supersoli8 . I will provide protection for him as he is in a very important position for the IRoS. Do not invade him.
I agree. It is understandable to be like 5 years ahead like me if you pour billions into research and development, but if you have no manpower or money like RNJ you can’t just pull billions of dollars out of thin air and create a massive military 20 years ahead. I’ve been advancing at a faster rate than everyone else for the past 15 years of KE-RP, and that aligns with my GDP. I have the funds to do this because of my domain over Can’t-uh-duh, Pan-ma, Southern NIC, the Ah-frik-an colonies, and 70% of the Mid-It-Terrain-E-Yeah-N. I want realism too.
@SomeSPGuyWhoLikesLore i do not recommend being a country in the Mediterranean region, unless you want to mess with my international interests as the mighty Imperial Republic of Spin.
@keiyronelleavgeek566 hmmm, may I fund it? I am showing quite a bit of interest in it. Can I also make a -B model adapted for the desired requirements and criteria for the Spinnish Ground Forces?
@keiyronelleavgeek566 sure. I can give you a ton of Spinnish equipment. My tanks are suited for action in the Your-upean terrain and can be modified for desert conditions too. A new ship to replace the conquistador will come soon, and my GB-11B & AMH-100-UDM1 are perfect for for-rants. The SIAR-Mod.54 would be great to replace the old infantry rifles you still use from the late 30s because I know you haven't changed them yet. You can also develop your own stuff to suit your own needs but this is a more cost effective, practical and powerful solution.
@34mphetamine Lol, well that is an excellent question I was waiting to be asked. It is quite the unorthodox SPH. In KE-RP, I am the Imperial republic of Spin. (I need to make a quick history lesson to give you some reasoning behind the design btw) The Imperial Republic of Spin/IRoS is the most powerful nation. I am the golden country in Europe on the KE-RP map found here (I also have southern Mexico but it’s not shown.) As you can see, I also control a lot of territory. My old howitzer was the SPH-M1H2 Titan. It was very lightly armored, and had a very unreliable early version of an autoloader. It was designed like any other howitzer, to fire kilometers away from enemy positions to provide its role. But The IRoS has been in four conflicts with UDD/The Bristolian Empire. And during these conflicts, we learned that our howitzers were constantly being found and destroyed by small armored vehicles and tanks. This also happened with fighting the nation of Jerry after we had political opposition. Lesson learned, and now our howitzers are more armored around the crew compartment and ammunition. But about the layout: the front features 2/3 the armor of the sides. This is because everything is meant to protect the crew. You can repair or replace a SPH or tank, but not a trained experienced crew. The engine is placed very far forward with insulation behind it to eat enemy shots, and be separate from the ammunition and driver during a fire. The horizontally mounted conveyor is built in such a way that is improved from the Titan, that the nearest part is far enough away from the crew that there is room for internal armor plating to prevent the ammunition from cooking the crew. It has a side armor thickness of 110mm in some parts, making it less likely for the ammunition to be hit. Furthermore, in the RP there is an extended range of this cannon compared to the Titan. We can position them farther away to give more reaction time for the crew. All of this comes at the price of speed and acceleration. That is the least of our concerns however, as the AMH-100-UDM1 doesn’t need speed to protect itself. It has thick armor in the event of far enemy incursions, and angled turret armor to further protect the crew. The crew is also spread out very far making it a literal school bus sized monster. It isn’t practical for close-up engagements obviously, the shielded MG and thicker than usual armor are last resorts,
@SPsidearm just where the magazine is. I tried to make it lower part so the rifle isn’t that detailed. For the SIAR-Mod.60 maybe I’ll try and make it a higher part count for more detail like that.
@BOSKnight hmm, well realistically the SIAR-Mod.54 has 26 parts. Mainly consisting of the barrel, muzzle, safety mechanism (5 parts), grip, trigger, shoulder mount, cartridge ejection, and magazine holster.
@SPsidearm how does it look for my first firearm design? I tried to add a lot of detail but make it realistic. I think that grip and barrel-to-muzzle area is pretty cool. Based off the CETME model C
@AugustVonMartis it is 1955. The year goes up by one every Friday.
+1Are you a company or country?
+1@BOSKnight no. Do not pursue war with @Supersoli8 . I will provide protection for him as he is in a very important position for the IRoS. Do not invade him.
+1I agree. It is understandable to be like 5 years ahead like me if you pour billions into research and development, but if you have no manpower or money like RNJ you can’t just pull billions of dollars out of thin air and create a massive military 20 years ahead. I’ve been advancing at a faster rate than everyone else for the past 15 years of KE-RP, and that aligns with my GDP. I have the funds to do this because of my domain over Can’t-uh-duh, Pan-ma, Southern NIC, the Ah-frik-an colonies, and 70% of the Mid-It-Terrain-E-Yeah-N. I want realism too.
+1I will order 700 units and increase from there
+1@SPWithLizzie no. Access blocked for rocket development.
+1@SPsidearm it’s so funny to me that the Israeli knock-off AK47 was made by a guy with the last name balashnikov instead of kalashnikov 😭
+1@SchmooveBrain so you’re Finland now? Do you mean tube-land?
+1@RepublicofKomi well well well, you don’t have to it’s not possible to spotlight Lol.
+1But when it is you must…
Are you in KE-RP? Are you a country or a defense contractor and if so what’s the name
+1@DeeganWithABazooka sure
+1@SomeSPGuyWhoLikesLore i do not recommend being a country in the Mediterranean region, unless you want to mess with my international interests as the mighty Imperial Republic of Spin.
+1Unfortunately, the GB-7 will be made for Spin soon so we will not make any purchases for the brickbird at the moment.
+1@xXLouisPlayzXx
+1@Yourlocal737
@PaintBrushSP
@DogedogebreadWithAnAK47
+1@Emma159
@IzzyTheCat
@Noob101
+1@Maluch
@KPLBall
@Christiant2
+1@F16xl
@SuperSuperTheSylph
@Solent
+1@GeneralCorpInc
@lazerguidedmissile
@urlocalgorillawithaspork I’m gonna make a B model called the GAMBT-Y950M2 with ERA and improved features
+1FanTastic build
+1@keiyronelleavgeek566 hello
+1I don’t have a computer I can’t build with mods 😭
@crone Lol, I will just have to like shorten it off a little. Which one do I do, the one under the barrel/forestock or the one above the stock?
+1@keiyronelleavgeek566 hmmm, may I fund it? I am showing quite a bit of interest in it. Can I also make a -B model adapted for the desired requirements and criteria for the Spinnish Ground Forces?
+1@keiyronelleavgeek566 sure. I can give you a ton of Spinnish equipment. My tanks are suited for action in the Your-upean terrain and can be modified for desert conditions too. A new ship to replace the conquistador will come soon, and my GB-11B & AMH-100-UDM1 are perfect for for-rants. The SIAR-Mod.54 would be great to replace the old infantry rifles you still use from the late 30s because I know you haven't changed them yet. You can also develop your own stuff to suit your own needs but this is a more cost effective, practical and powerful solution.
+1For-Rants finally coming back! Please build up a defense force I can’t keep my military on your land to defend your borders 😭
+1@BOSKnight no thank you. I will stick to the Himler Class
+1Why in the name is that the designation 😭
+1@BOSKnight ok
+1@SPWithLizzie I was going to call them It-Tally and Mall-tbh but @BOSKnight named them so I didnt want to change it
+1@dabestsock ikr, over the Volga in 2014.
+1@Bugati87 so what I’m getting at here is, uh….
+1You’re a commie, eh?
@xXLouisPlayzXx ur choice. I don’t care what u do with it its ur build not mine Lol
+1@xXLouisPlayzXx Lol 😭
+1The B-one-R
+1@34mphetamine Lol, well that is an excellent question I was waiting to be asked. It is quite the unorthodox SPH. In KE-RP, I am the Imperial republic of Spin. (I need to make a quick history lesson to give you some reasoning behind the design btw) The Imperial Republic of Spin/IRoS is the most powerful nation. I am the golden country in Europe on the KE-RP map found here (I also have southern Mexico but it’s not shown.) As you can see, I also control a lot of territory. My old howitzer was the SPH-M1H2 Titan. It was very lightly armored, and had a very unreliable early version of an autoloader. It was designed like any other howitzer, to fire kilometers away from enemy positions to provide its role. But The IRoS has been in four conflicts with UDD/The Bristolian Empire. And during these conflicts, we learned that our howitzers were constantly being found and destroyed by small armored vehicles and tanks. This also happened with fighting the nation of Jerry after we had political opposition. Lesson learned, and now our howitzers are more armored around the crew compartment and ammunition. But about the layout: the front features 2/3 the armor of the sides. This is because everything is meant to protect the crew. You can repair or replace a SPH or tank, but not a trained experienced crew. The engine is placed very far forward with insulation behind it to eat enemy shots, and be separate from the ammunition and driver during a fire. The horizontally mounted conveyor is built in such a way that is improved from the Titan, that the nearest part is far enough away from the crew that there is room for internal armor plating to prevent the ammunition from cooking the crew. It has a side armor thickness of 110mm in some parts, making it less likely for the ammunition to be hit. Furthermore, in the RP there is an extended range of this cannon compared to the Titan. We can position them farther away to give more reaction time for the crew. All of this comes at the price of speed and acceleration. That is the least of our concerns however, as the AMH-100-UDM1 doesn’t need speed to protect itself. It has thick armor in the event of far enemy incursions, and angled turret armor to further protect the crew. The crew is also spread out very far making it a literal school bus sized monster. It isn’t practical for close-up engagements obviously, the shielded MG and thicker than usual armor are last resorts,
+1@Rb2h I noticed… 😭
+1Btw make the B-1R next…
+1Air Force humor
Everyone spotlight it or I will (kindly) make you build the tu-160, which as we all know is an insult in itself
+1@AviationLoverGEEK444 same as my name.
+1@AviationLoverGEEK444 @BOSKnight I don’t own Eat-a-lee. I own Grease. But I am attacking Eat-a-lee in the next few days
+1@GeneralCorpInc i see…
+1@SPsidearm just where the magazine is. I tried to make it lower part so the rifle isn’t that detailed. For the SIAR-Mod.60 maybe I’ll try and make it a higher part count for more detail like that.
+1@RB107 ok thank you!
+1@RB107 actually I’ll take number 3.
+1@GeneralCorpInc thank you. Can I get a hint at what it is you are making?
+1@BOSKnight hmm, well realistically the SIAR-Mod.54 has 26 parts. Mainly consisting of the barrel, muzzle, safety mechanism (5 parts), grip, trigger, shoulder mount, cartridge ejection, and magazine holster.
+1General Corp Inc:
+1@GeneralCorpInc pretty cool, right?
Umbra Defense:
@SchmooveBrain
You-Go-Slav-Yeah:
@NotRob119
@xXLouisPlayzXx
+1@Yourlocal737
@PaintBrushSP
@SPsidearm how does it look for my first firearm design? I tried to add a lot of detail but make it realistic. I think that grip and barrel-to-muzzle area is pretty cool. Based off the CETME model C
+1@DogedogebreadWithAnAK47
+1@Emma159
@IzzyTheCat