@Ironman2613 go to your simpleplanes appdata files and delete the file called __editor__.xml and replace it with a copy of __new__.xml. This should clear the editor.
There are two obvious reasons that this is fake:
1. The target boxes are at the front of the trucks. On the real trucks, they are in the middle. Pretty sure it's actually an "aircraft" which is a replica of the truck.
2. It's clearly a very old photo as you can see the old-style instrument panel. I highly doubt you're still running 1.5, two major versions behind.
@Rodrigo110 I read your comment, and I can confidently say it's got about 1% sense in it, (combining meshes, which the game already does where applicable).
@kukimuki1234 if you have a HTML colour code (ie #3E2F32), set the mode to hexadecimal (if it says decimal click it to toggle it) then split the color code into 3, 2-digit values (if there are 4 then ignore the last one because it's for opacity). Put them in the R, G, and B fields.
tl;dr if it's #3E2F32
then set Hexadecimal R 3E G 2F B 32
@ShockRF source code is not a concrete entity, it is a far-reaching concept which cannot be described in NTFS format. Compiled code being the rationalised end product, the process to create it requires you to divide the approximation for the output stack size by the amount of times it takes to find this value. These difficulties make it an NP-complete task so imma drop the mic here and leave
Mac: looks cool from a distance, you get in the cockpit and it won't let you control the flaps, instead it uses a rubbish algorithm to auto-set them and if you scratch it it must be sent back to the manufacturer for a full engine overhaul.
PC: you get in, set everything how you like it, shove up the throttle and look epic.
@JohnnyBoythePilot find your SimplePlanes files (appdata\locallow\jundroo\simpleplanes\aircraftdesigns) and delete __editor__.xml. This should clear the current editor design.
@PorkyClown3
1. Get Tampermonkey
2. Click Tampermonkey Icon
3. Click Dashboard
4. Click the new script button (in the top right, it has a green plus and some paper next to "Installed Userscripts").
5. Delete everything in the big text box
6. Paste the script I linked
7. Ctrl + S
8. Refresh Simpleplanes.
@Jacobdaniel sure
you're like me, putting loads of work into several projects simultaneously, switching to other projects before you finish the one before.
Make sure the gear isn't too far behind the CoM. If you see the suspension getting compressed when you pull up, move it forward.
@Ironman2613 go to your simpleplanes appdata files and delete the file called
__editor__.xmland replace it with a copy of__new__.xml. This should clear the editor.uh, what?
@BeryllCorp ah yes, that's a problem. I don't think that feature was documented, so just don't mix and match and be glad it exists at all :P
@RedstoneAeroAviation nope. Unless you get two different missiles and somehow attach them to each other.
@Awsomur Congratulations, you took a few comments from this post, added a screenshot and made it an excuse for a forum post.
There are two obvious reasons that this is fake:
1. The target boxes are at the front of the trucks. On the real trucks, they are in the middle. Pretty sure it's actually an "aircraft" which is a replica of the truck.
2. It's clearly a very old photo as you can see the old-style instrument panel. I highly doubt you're still running 1.5, two major versions behind.
@Rodrigo110 I read your comment, and I can confidently say it's got about 1% sense in it, (combining meshes, which the game already does where applicable).
@LBYSteven If you have the latest version of overload, there should be a Health attribute in the part menu
@RedstoneAeroAviation tested it, it works. Make sure you're doing
AirToSurfaceand NOTAirToGround. and make surefunctionis all lowercase.or you could use a calculator. Or this
@1997toyotasupra done!
@1997toyotasupra I'm sorry. I'm terrible at putting stuff on the workshop. Took me like a year to put overload on there. I'll try tomorrow. Hopefully
@kukimuki1234 if you have a HTML colour code (ie
#3E2F32), set the mode to hexadecimal (if it says decimal click it to toggle it) then split the color code into 3, 2-digit values (if there are 4 then ignore the last one because it's for opacity). Put them in the R, G, and B fields.tl;dr if it's
#3E2F32then set
HexadecimalR 3EG 2FB 32@alexchub1 yes! Clouds, we need clouds!
@ShockRF source code is not a concrete entity, it is a far-reaching concept which cannot be described in NTFS format. Compiled code being the rationalised end product, the process to create it requires you to divide the approximation for the output stack size by the amount of times it takes to find this value. These difficulties make it an NP-complete task so imma drop the mic here and leave
bulletScalefor big bullets. To change the damage they cause, setdamage@ShatSlanger not sure
@Stellarlabs
damagechanges that.ammoCountdoes absolutely nothing. Guns can't run out of ammo (once upon a time maybe they did and this is a relic)@jamesPLANESii I don't know, really.
@jamesPLANESii I don't really know, I'm using firefox android beta... do you have tampermonkey installed?
U = toggle music (so you can play musical chairs)
@ShockRF nope xD
@Spacedoge12345plane a very very low centre of mass. I modded the block on the bottom.
@AstleyIndustries no,
!beats.This, and sort planes by recently used. Our planes will no longer have to be called
!!!_00heli2.xmlto get them to the top xDMac: Sorry but I'm not gonna let you take that water bottle on board, it's not been through the 3-month review process
@KASA they should... If you re-open overload after adding them, do they disappear?
Mac: looks cool from a distance, you get in the cockpit and it won't let you control the flaps, instead it uses a rubbish algorithm to auto-set them and if you scratch it it must be sent back to the manufacturer for a full engine overhaul.
PC: you get in, set everything how you like it, shove up the throttle and look epic.
@QingyuZhou I agree, that last screenshot looks pretty damn cool.
and well done @Dipper
@DemonSniper8 but your "funny message" is basically a criticism of the feature designed to prevent you from spamming upvotes...
You shouldn't be spam-upvoting. Upvotes are for recognising quality builds rather than doing someone a personal favour by upvoting all of their stuff.
@GermanWarMachine I don't think you're really supposed to do that.
@Alienbeef0421 instead of
1e+35just writeInfinity.@kerothehero Scroll down to rewards
@JohnnyBoythePilot if it happens again, try replacing
__editor__.xmlwith a copy of__new__.xml@DemonSniper8 can't you google "google docs dark theme"?
@JohnnyBoythePilot ah, steam sync trying to be helpful. Glad you got it fixed.
@JohnnyBoythePilot find your SimplePlanes files (
appdata\locallow\jundroo\simpleplanes\aircraftdesigns) and delete__editor__.xml. This should clear the current editor design.@EternalDarkness @Mostly @Fjorge see updated download.
@PorkyClown3 ok, open this link, then select all (ctrl+a) and copy to make sure you didn't copy something else as well by mistake.
@PorkyClown3 when you click new script, you should see something like
@PorkyClown3
1. Get Tampermonkey
2. Click Tampermonkey Icon
3. Click Dashboard
4. Click the new script button (in the top right, it has a green plus and some paper next to "Installed Userscripts").
5. Delete everything in the big text box
6. Paste the script I linked
7. Ctrl + S
8. Refresh Simpleplanes.
If not, open developer console (F12 > Console) and see if there are errors.
@PorkyClown3 if you click the tampermonkey icon can you see "simpleplanes.com tweaks" next to a switch set to "on"?
@PorkyClown3 huh. What browser? Make sure the script and the plugin are both enabled and you saved the script.
@Pilotmario make sure it works before you thank me!
@Fjorge I happen to like it more at
but I'm about to post a newer version with a load of improvements.