@TheLurkingVexedVortex have you disabled the magnet? If so, then the gyroscopes aren't the strongest so turret movement isn't the fastest. And for M1, I'll think about it since my replica skills are rusty
@CenturiVonKikie Thank you very much! And yeah it may not have as much upvotes as some other builds, but at the end of the day I'm just glad that I completed this tank as rhe build process was painful
@MetallicFox yeah I don't expect anyone to modify or have lots of fun with this due to how much parts she has, and if you can't download her that's also fine since I really went far. To be honest, I'm fine with your modifications, even though they're just the tracks. They'll get negative comments sure, but I understand you're starting out and I have no problem with people modifying my tanks. I'm sure you'll learn how to make your own tanks in the future, and I'll be interested to see what they will if you do make them.
@AsteroidAsteroidTheBook last minute design change and personal preference. I based it off the Sud-Est Grognard, and I exaggerated the "neck" on my design, however I relocated the intake to the chin but kept the weird neck, and that's how it got here
@DieDieTheLoaf I based the plane off the Sud-Est Grognard, a French prototype attacker. It had the intake on top, and when I was designing mine I exaggerated it a bit, though I moved the intake to the chin last minute but I kept the dip because I quite liked it
@RussOurs Thank you! Of course after a while and after you keep building you'll get the hang of it. My advice is check reference photos of actual vehicles, their dimensions and shapes and what not. It won't hurt to take inspiration of some real life vehicles and eventually you'll begin to create your own. I bid you good luck and am looking forward to your future builds!
@RussOurs the hull of this was indeed my first try at making a tank hull. My knowledge on tanks when building it was non existent and just based on pictures. I'm sure you'll improve as you go and will be able to build your own hulls. Am surprised and glad to see it getting upgraded!
@TastyTanks I did consider having the ball, but I thought the building is wide enough to not topple over. I also tested the building with SP's wind settings and the dampers worked against it too however the shock absorbers did break on stronger winds. If the building were to be higher, then I might add the ball
@AWESOMENESS360 Yeah! The teacher did say to just provide a sketch or illustration, but I saw this as a perfect excuse to practice with pistons and shock absorbers
@dTitanplanesb Yep, that's why when testing I used loose plates instead of the actual building. Not a full representation but I think its good enough. Maybe one day I can recreate a model of the base and see if it really works
@Embo thank you!
@TankerWithATankard I love EBRs when they're with me, hate them when they're my enemy
@TheLurkingVexedVortex actually not sure, though I think it will since I forgot to make the entire turret lighter
@TheLurkingVexedVortex oh, well its because the rotator the turret is attached to. Its set to free spin, so it doesn't turn with the tank
@TheLurkingVexedVortex somewhere in the bustle, the rear of the turret
@TheLurkingVexedVortex glad you love it :D
@TheLurkingVexedVortex Welcome
Absolutely beautiful
@TheLurkingVexedVortex have you disabled the magnet? If so, then the gyroscopes aren't the strongest so turret movement isn't the fastest. And for M1, I'll think about it since my replica skills are rusty
@MajorSix yes
@Stevengaming I use hinges for them, the game doesn't recognize those as control surfaces since they're "custom"
@Sadboye12 Thank you!
+1@Seeras Thank you! And yes you're correct, those three are some of the tanks I based it off, the others being the Abrams and the K2
@CenturiVonKikie Thank you very much! And yeah it may not have as much upvotes as some other builds, but at the end of the day I'm just glad that I completed this tank as rhe build process was painful
+1@MetallicFox yeah I don't expect anyone to modify or have lots of fun with this due to how much parts she has, and if you can't download her that's also fine since I really went far. To be honest, I'm fine with your modifications, even though they're just the tracks. They'll get negative comments sure, but I understand you're starting out and I have no problem with people modifying my tanks. I'm sure you'll learn how to make your own tanks in the future, and I'll be interested to see what they will if you do make them.
@ThomasRoderick no problem! These are really nice
+1@tsampoy Thank you!
@DieDieTheLoaf oversight on my part, I thought it was rolling too much on the earlier version and I changed it, I thought it was fine
@AsteroidAsteroidTheBook last minute design change and personal preference. I based it off the Sud-Est Grognard, and I exaggerated the "neck" on my design, however I relocated the intake to the chin but kept the weird neck, and that's how it got here
@DieDieTheLoaf I based the plane off the Sud-Est Grognard, a French prototype attacker. It had the intake on top, and when I was designing mine I exaggerated it a bit, though I moved the intake to the chin last minute but I kept the dip because I quite liked it
@Rillette21 oh I really like those
@MisterT I do like that a lot
@WarshipDude I tried to make it look unique as I didn't know what to build at first, I think it came out interesting
This is really awesome
+1@tucan oh, you're right, thanks for pointing it out!
@tucan thanks! I'm glad you liked it!
@FA50PH thank you!
@JS01 thank you!
@Bernkastel vielen danke
+1Very nice indeed
+1@JS01 uw
+1@mikoyanster Thank you! I will participate, and I'll definitely do my best!
@Norag33 thank you!
@Sovietstrike333 thank you!
+1@JS01 thanks!
Beautiful
@RussOurs Thank you! Of course after a while and after you keep building you'll get the hang of it. My advice is check reference photos of actual vehicles, their dimensions and shapes and what not. It won't hurt to take inspiration of some real life vehicles and eventually you'll begin to create your own. I bid you good luck and am looking forward to your future builds!
@RussOurs the hull of this was indeed my first try at making a tank hull. My knowledge on tanks when building it was non existent and just based on pictures. I'm sure you'll improve as you go and will be able to build your own hulls. Am surprised and glad to see it getting upgraded!
That's actually a pretty nice looking turret.
@tucan Thank you very much!
@ChrisPy Thank you! And yes, the drag did slip my mind during the build since I haven't built a plane in a while. I'll keep that in check next time.
Next build not sure yet. Either a CAS aircraft or a lightly armored tank destroyer.
Beautiful
+1@TastyTanks I did consider having the ball, but I thought the building is wide enough to not topple over. I also tested the building with SP's wind settings and the dampers worked against it too however the shock absorbers did break on stronger winds. If the building were to be higher, then I might add the ball
@tsampoy I'm always happy to use SP in a school project whenever I can, and its also allows me to build stuff I haven't tried before
@dTitanplanesb that sounds like a really cool project, and it standing up to 9.0 is really impressive
@AWESOMENESS360 Yeah! The teacher did say to just provide a sketch or illustration, but I saw this as a perfect excuse to practice with pistons and shock absorbers
@Aeromotive this is the first cool project we got, so I decided to make the most out of it
@dTitanplanesb Yep, that's why when testing I used loose plates instead of the actual building. Not a full representation but I think its good enough. Maybe one day I can recreate a model of the base and see if it really works
@YoDudeChase Thanks! And yeah from my research it's really uncommon, I decided to do this for complicated reasons