@AndrewGarrison
Sorry to bother you. I have removed my upvote before, but I found that my upvote came back and so did some of people who didn't upvote either. Do you know why?
You can add livery and modify some white versions if you like. Just give credit and let me know.The links are in the description:)
(The "stretcher" is typed incorrectly as "strecher" in the description due to my poor English. Please do not mind it.)
@WarthogTheHog Thanks!
As for the spinning, I already set the tail rotor to head hold. Setting the torque to 0 caused it to tilt to another side even harder, so I decided not to change it.
(It will spin when I was flying EC135 in Aerofly as well, so I think it will be more realistic if it is not changed.)
@Thunderbolt916 Thanks for your comment!
For the livery, maybe i will give it a new one, but i haven't watch the film now... I am trying to make fly-by wire these days, so i will update the control system. For the afterburners, it will activate when the throttle is over 98%, the thrust will increase but it doesn't have flames, which i will also update when i have time. And the HUD needs to be updated as well.
@PlaneFlightX the angle of glideslope is 3 degrees(tan3=0.0524), and these things are calculated in meters(distance to the glideslope), maybe as many as you can fly away from it:)
NICE
+1@Reworkable OK let me see:)
+1@TheBuilder24 Maybe hard to make mobile friendly one, because there are too many parts on the fuselage...
+1NICE
+1@PlenBoiPro There are two buttons on the rear door
EC135 [Helionix on board] D-HECB
(Livery made by @MIG31FoxhoundBM)
@AndrewGarrison
+5Sorry to bother you. I have removed my upvote before, but I found that my upvote came back and so did some of people who didn't upvote either. Do you know why?
-2 minutes ago (doge)
+1@DesertRatDavid I will make it when i have time(sorry maybe i didn't notice your comment that day)
You can add livery and modify some white versions if you like. Just give credit and let me know.The links are in the description:)
(The "stretcher" is typed incorrectly as "strecher" in the description due to my poor English. Please do not mind it.)
@Keagangraye EC135 Mobile Friendly no interior(422p)
@Keagangraye OK
+1@Winterfield Is the rotor rotating?
If it is, just VTOL up slowly
If not, start up again.
woc这更新速度。。。
（T）
@teddyone02 yeah
@Zaineman OK :)
@WarthogTheHog No no no Thank you anyway
+1@WarthogTheHog Thanks!
+1As for the spinning, I already set the tail rotor to head hold. Setting the torque to 0 caused it to tilt to another side even harder, so I decided not to change it.
(It will spin when I was flying EC135 in Aerofly as well, so I think it will be more realistic if it is not changed.)
@NothingLikeAnything Because they are big and the suspension is too soft.
The diameter of the rotor is too small, and I will fix it.
Comment if there's any problem, and i will try to fix it.
@AkifProDude2077 okay:)
@KnightOfRen Thanks!
棒
@Thunderbolt916 Thanks for your comment!
+1For the livery, maybe i will give it a new one, but i haven't watch the film now... I am trying to make fly-by wire these days, so i will update the control system. For the afterburners, it will activate when the throttle is over 98%, the thrust will increase but it doesn't have flames, which i will also update when i have time. And the HUD needs to be updated as well.
来晚了）
@klm747klm747 I am wrong it is 01R
@PlaneFlightX the angle of glideslope is 3 degrees(tan3=0.0524), and these things are calculated in meters(distance to the glideslope), maybe as many as you can fly away from it:)
太强了
@CR929thenewSPplayer 看到了：）
WOC这个绝了
+3@Superwiffools don't you mean this in your comment in my former Supra?
For those who are used to drive on the left side
@Superwiffools
@CSNStudio 2640766112
@CSNStudio 现在没有时间啊，要不等到暑假？
@DroneDroneTheBoi @HorizonOfficial
@wfy312
I removed the old post because it had too many bugs. You can try this
+1I just removed it because it had too many bugs. Sorry for that.
I just uploaded the xml because of some landing gear issue.
@MrShenanigans2020 contact @HorizonOfficial
@MrShenanigans2020 yes maybe
+1@wfy312
Nice, drives good👍
@MAHADI Thanks
@Bummer update on your PC
元宵节快乐~
+1@donkski Maybe friction. I don't konw...
+1And the new wheels look definitely better
@Random04 no, but you can modify it :)