I'm going to send two messages here, this one is the first. I'm really really sorry, because I genuinely love this plane, but I cannot allow it because too many of the requirements are broken. The wingspan and length I could shrug off, but the weight is off by a lot, the part count is too low (this plane looks good enough where I wouldnt mind though), and the jet and prop are too powerful, there are no weapons, and the plane is not carrier capable. For this reason, and once again I am sorry, this plane is
Also, I play on mobile as well, and I can run 1000+ parts, so just to make sure, what is your limit? Lately my builds have been 200-500 parts and my current one will likely be around 350
Oh! And another note, before anyone asks, realistically, you can have contra-rotating props, but they have to be "connected to one engine." No more than two props, and if there are two, they must be contra-rotating. If you have questions on horsepower, just contact me.
The hyperlink on the XF15C-1 leads to my shamelessly promoted build that is a great starter to look into its construction if anyone needs help with building techniques (although I am a poor example lmao)
Again, if anyone needs anything or has questions, contact me here or through an unlisted and I will help! But I will not give advice on people's builds or help them construct it, as this is unfair. Just a note.
@MrSilverWolf could you pretty please make this a successor to RepublicOfCursedPlanes' Never Built Challenge? Thank you so so much, I am sorry to bother
.
Code: 3xjkX6
@RepublicOfCursedPlanes
This is my submission to your challenge, I will work on making it a successor
.
Also, it has a wingspan of ~45-ish feet, the X was increased in size which makes the borders do weird stuff lol
@CaptFoxworth19 uhhh, I really just look up the plane model's blueprints, to to images, and then click on them. Once I click on one that doesn't have any grainyness, and is high resolution, I download it. I guess I just got lucky this time 😂
If you saw my previous message, I take it back because it has the same issue as the YFM-1 Airacuda did with it being put past production, if not, ignore this part
.
Could I do the XB-42 Mixmaster? There does not appear to be one on the site. I would specifically be doing the XB-42A, which was one of the modifications that added 2 jet engines alongside the props. The aircraft was never finished and was cancelled really early on
Could I submit my in-the-works YFM-1A Airacuda here? I think about 16 were built, but they were all scrapped and none remain, it never got into mass production
@HazerzIsBack you asked for a tag on my forum post!
.
Also, the reason I didn't finish this is becayse I lost inspiration and realized later on that I'd have to rebuild pretty much everything to make it accurate and smooth, so I'm just scrapping the project and starting anew
Once Again, I am sorry guys. This was certainly not my best, alas, I intend on making this brand spanking new and completely starting from scratch. Right now, I am working on an IAR 80 on my own, and a TBF-1C with my buddy PapaKernels. After that, I am going to start on a YMF-1A Airacuda and then on the official B-36J-III Peacemaker that I truly want to make the greatest build I have ever made. With that, I wish you all an amazing day
@Talon7192 thanks mate! XD
I've been off this site for quite some time due to school. I should finish this soon though
.
I have like 30 unfinished projects that vary in quality, but this build is pretty low now lmao
I will say, that cockpit was amazing
.
She's not a potato, and I can tell you put effort in to her. Good job man!
I'm going to send two messages here, this one is the first. I'm really really sorry, because I genuinely love this plane, but I cannot allow it because too many of the requirements are broken. The wingspan and length I could shrug off, but the weight is off by a lot, the part count is too low (this plane looks good enough where I wouldnt mind though), and the jet and prop are too powerful, there are no weapons, and the plane is not carrier capable. For this reason, and once again I am sorry, this plane is
Disqualified
Sorry mate, I suck at building helis, but I think this is a brilliant challenge, so take my updoot dude!
@Richflysplanes okay!! cool
Also, I play on mobile as well, and I can run 1000+ parts, so just to make sure, what is your limit? Lately my builds have been 200-500 parts and my current one will likely be around 350
If so, then I'm in!
Do penetration fighters count? (XF-88)
@ColonelCanada 😂
@CL125 OH
@CL125 huh? 😂
Ayo this is sick dude! I'm working on making an XF-88B Voodoo right now! You did a brilliant job on this. Take my updoot!
@RYAviation Cool!
Also, please leave a comment on here if you are planning on joining!
Alright! She's posted! Godspeed, y'all
Oh! And another note, before anyone asks, realistically, you can have contra-rotating props, but they have to be "connected to one engine." No more than two props, and if there are two, they must be contra-rotating. If you have questions on horsepower, just contact me.
The hyperlink on the XF15C-1 leads to my shamelessly promoted build that is a great starter to look into its construction if anyone needs help with building techniques (although I am a poor example lmao)
Again, if anyone needs anything or has questions, contact me here or through an unlisted and I will help! But I will not give advice on people's builds or help them construct it, as this is unfair. Just a note.
@MrSilverWolf crap. Alright, sorry mate
@MrSilverWolf could you pretty please make this a successor to RepublicOfCursedPlanes' Never Built Challenge? Thank you so so much, I am sorry to bother
.
Code: 3xjkX6
@RepublicOfCursedPlanes
This is my submission to your challenge, I will work on making it a successor
.
Also, it has a wingspan of ~45-ish feet, the X was increased in size which makes the borders do weird stuff lol
@CaptFoxworth19 uhhh, I really just look up the plane model's blueprints, to to images, and then click on them. Once I click on one that doesn't have any grainyness, and is high resolution, I download it. I guess I just got lucky this time 😂
@SemedianIndustries and thank you!
@VittonVitor
Thanks!!!
@PapaKernels
Got her posted!
If you saw my previous message, I take it back because it has the same issue as the YFM-1 Airacuda did with it being put past production, if not, ignore this part
.
Could I do the XB-42 Mixmaster? There does not appear to be one on the site. I would specifically be doing the XB-42A, which was one of the modifications that added 2 jet engines alongside the props. The aircraft was never finished and was cancelled really early on
@RepublicOfCursedPlanes darn. Okay!! No worries dude! 😂
Could I submit my in-the-works YFM-1A Airacuda here? I think about 16 were built, but they were all scrapped and none remain, it never got into mass production
I'm looking forward to it's release!
Sick bro!!!
@TrojanAircraftSystems hey bro!! Thank you!! I actually have been wondering 😂 it's been some time, old friend!!
@Kangy I bet it'll come out amazing!!
Awesome job, mate!!!! This loooks amazing, even in simplicity!!
@Talon7192 okay good!!
@Talon7192 did that work? hope it helps dude!
Or rather, VTOL up
@Talon7192 did you VTOL forward? You need to get the props to stabilize. They don't automatically control their pitch
LINK TO FORUM
@HazerzIsBack you asked for a tag on my forum post!
.
Also, the reason I didn't finish this is becayse I lost inspiration and realized later on that I'd have to rebuild pretty much everything to make it accurate and smooth, so I'm just scrapping the project and starting anew
@HazerzIsBack wdym?
@Ren @Gx
I made a new account, I deactivated my old one because it got hacked like 5 times in a row
Once Again, I am sorry guys. This was certainly not my best, alas, I intend on making this brand spanking new and completely starting from scratch. Right now, I am working on an IAR 80 on my own, and a TBF-1C with my buddy PapaKernels. After that, I am going to start on a YMF-1A Airacuda and then on the official B-36J-III Peacemaker that I truly want to make the greatest build I have ever made. With that, I wish you all an amazing day
~REQUESTED TAGS~
@Bryan05
@Astro12
@Default4
@TheSolarFlare
@Asrold
@TatsuTheOtaku
@PlaneFlightX
@Scratchoza
@Nekopankake3222
@Talon7192
@HazerzIsBack
@KerlonceauxIndustries
@asteroidbook345
@Talon7192 thanks mate! XD
I've been off this site for quite some time due to school. I should finish this soon though
.
I have like 30 unfinished projects that vary in quality, but this build is pretty low now lmao
Sick bro!!