@xjean05
That's weird, you can always come to my SP page and download it again and again.
Or you can post it as unlisted plane and save yourself from violation of the rules.
Hmm...
* a little bit concerned noise *
You put your ultimate faith in your machine, it's a prove that the machine is of good quality.
But I have more concern about vertical stabilizer though, when you flying at low throttle I think it'll be too much for the tvc to compensate for the lack of vertical stabilizer.
@WiniMii
What's the point calling this a challenge while flying that slow, it is so easy because you have all the time in the world to adjust you flight path.
I bet this is easy for you because it is insultingly easy for me.
@aTerra
At 10km IAS will be super low, I just climb at 10 degrees at high altitude.
I guarantee you that it can go to 20km.
And I can't complain about acceleration either, I got it's mass and it's thrust equal to the source and acceleration will be for SP physics to decide.
Also there are no source that I can get my hand on that clearly specify acceleration.
I recently got some tips from edensk that add more air intake will fix loss of thrust at altitude, I think it'll fix it's max speed too.
Maybe next build I'll fix it.
@aTerra
I'll say that you're right about top speed but there's a catch.
"i cant get faster than 1.300 km/h" -> That's top speed at low altitude, most fighter struggle at this speed at low altitude because the air is too dense, they can achieve top speed by flying at high altitude.
And I can get to around 1700km/h TAS at high altitude, the problem come from SP itself that model thrust loss at altitude as it is and there is no way to fix the problem directly, only increase throttle or reduce drag mid-flight which is not a good solution after all.
Also, I think you got wrong idea about max altitude the plane can climb to.
I assume that you only get to 10km of altitude is because you just go straight up, that's quick but inefficient way to climb, instead you should fly fast and make a steady climb like irl fighter jet do and you'll get to 20km with no struggle.
@MAHADI
lol
I'll use more inlets.
Actually I learned about inlet when I got about half way building this so there will be a few "noob inlets control surface" here and there.
@PaulJohnLozada
You've learned FT and how about flight characteristic?
Both of them is equally important.
Google "Aviation stackoverflow" can be useful, but it'll be random topic about flight lol.
@AnHNWhiteCornet
You can modify it the way you want I don't really mind it, as long as you credit.
@Radioactiven
Yes Jeff!!
@xjean05
Then what was the modification.
There are not many and barely notiecable.
@MrShenanigans
My pc is not high grade by any means but it might handle 15k part ok with some loss of fps.
@MrShenanigans
My pc can handle 15k parts.
I can test it and give you some feedback.
@xjean05
That's weird, you can always come to my SP page and download it again and again.
Or you can post it as unlisted plane and save yourself from violation of the rules.
@Astro12
Am I?
Never knew that before.
@WiniMii
Confusion of da highest order.
@KnightOfRen
If you know, you know.
Why repost my plane.
@xjean05
Just go to setting and see the controls.
@JuanNotAnAlt
lol
His name is really Jeff.
@JuanNotAnAlt
lol
idk what is kaplan.
@xjean05
I think you forget to turn on radar and select target.
In dogfight it turn on by default but in sandbox you have to do it manually.
@Tetrodotoxin
His name is Jeff.
@JuanNotAnAlt
idk if it'll be twist enough when I reveal it.
@AN2Felllla
Not just any bullet, it's match grade.
It can shoot through the same hole at 50m with the right gun.
And it's super expensive lol.
@MrShenanigans
What do you need.
I'm quite busy but I'll see what I can do.
@MentallyDistorted
Thanks.
Hmm...
* a little bit concerned noise *
You put your ultimate faith in your machine, it's a prove that the machine is of good quality.
But I have more concern about vertical stabilizer though, when you flying at low throttle I think it'll be too much for the tvc to compensate for the lack of vertical stabilizer.
@yackdeculture
Yes.
@WiniMii
What's the point calling this a challenge while flying that slow, it is so easy because you have all the time in the world to adjust you flight path.
I bet this is easy for you because it is insultingly easy for me.
@Kago
Thanks.
This is old plane lol, my newer plane have better controls.
But if you like it, who am I to judge.
@ALRX
I used exactly what SnoWFLakE0s said.
Although my code is a bit messy lol.
@aTerra
At 10km IAS will be super low, I just climb at 10 degrees at high altitude.
I guarantee you that it can go to 20km.
And I can't complain about acceleration either, I got it's mass and it's thrust equal to the source and acceleration will be for SP physics to decide.
Also there are no source that I can get my hand on that clearly specify acceleration.
I recently got some tips from edensk that add more air intake will fix loss of thrust at altitude, I think it'll fix it's max speed too.
Maybe next build I'll fix it.
@CityAirThemeCityxt
I've come for the plane, stayed for the song.
@Vladimir97
Tvc is easy.
The code is the hard part lol.
@AngryMaus
Propellers turn the plane to the target.
@aTerra
I'll say that you're right about top speed but there's a catch.
"i cant get faster than 1.300 km/h" -> That's top speed at low altitude, most fighter struggle at this speed at low altitude because the air is too dense, they can achieve top speed by flying at high altitude.
And I can get to around 1700km/h TAS at high altitude, the problem come from SP itself that model thrust loss at altitude as it is and there is no way to fix the problem directly, only increase throttle or reduce drag mid-flight which is not a good solution after all.
Also, I think you got wrong idea about max altitude the plane can climb to.
I assume that you only get to 10km of altitude is because you just go straight up, that's quick but inefficient way to climb, instead you should fly fast and make a steady climb like irl fighter jet do and you'll get to 20km with no struggle.
@Idkwhattocallthis
Just use Overload mod which I think pre-installed in the game.
You can find the code in rotators.
I love how the antenna bouncing when it get in the way of the cannon.
That's attention to detail at it's finest.
@Samhimstone
No need to complain.
This can be easily fixed by yourself.
@MyCatIsBarking
You can add it yourself.
There is plenty of room under the plane.
@Formula350
Oh yeah..
Definitely Лука Скайуокер.
@Tookan
lol.
@Kangy
NP
@MRpingouin
Thanks.
Try the maneuver and see how easy it is lol.
@MAHADI
lol
I'll use more inlets.
Actually I learned about inlet when I got about half way building this so there will be a few "noob inlets control surface" here and there.
@BogdanX
Agreed.
I'll learn more about modelling.
@Thunderhawk
Nice.
But how.....
Even I got it in like a 5th try.
@AWESOMENESS360
Thank you.
Now I'll be practicing in modelling so my plane will be truly perfect lol.
@ChrisPy
Thanks.
@Higuy453
Thanks.
It's insane indeed.
@aaronneit
It's a "free cam" mod.
(I don't know Spanish lol.)
@PaulJohnLozada
You've learned FT and how about flight characteristic?
Both of them is equally important.
Google "Aviation stackoverflow" can be useful, but it'll be random topic about flight lol.
@MrShenanigans
I know that.
@MrShenanigans
I'm confused.
TF2 have plane?
@Astro12
lol.
Try the potato version if 900 parts is too much load for your machine.
@BBCP117
It's twitchy because it is unstable by nature.
It's the best I can bend the law of mother nature lol.
@PioThePioneer
Thanks.