Rotation sounds useful. Dunno how much I’ll use it but it’s good to have, especially seeing as the old WASD rotation seemed to essentially re-place parts in the same pattern causing faulty autoconnections.
view tool that lets you move the camera around without accidentally grabbing parts.
So like middle mouse button but for camera placement? Will it be key bindable?
whether to move parts relative to their local rotation or the world coordinates.
If that works how I’m interpreting that sounds very useful for posing models.
…
A suggestion I have for mirroring (alongside retaining an old-style button) would be something to show what the other part has for a value. I assume that, if in the gif, wheel size were altered while set to mirror mode both sides would suddenly snap to the same. I reckon it’d be good to show in parenthesis what the other side is at (I.e. 70% (100%) & 100% (70%)). I’m also reminded of how fuselage slicing will display the in-between value (I.e. between 100% and 50% it’ll be something like 75% displayed) which is neither correct nor allows you to change it while connected seeing as both parts will suddenly share the same slice.
…
The undo history looks very useful. While this will probably be bad for RAM, having to save vastly more craft files while playing, I’ll at least be able to know when I accidentally judged a part hundreds (or was it hundreds of thousands?) of kilometres forward causing my craft to shift backwards into the endless void, forcing me to undo until that step is gone.
…
Oh!
Will the editor be bigger?
Currently the editor has a tiny render distance and doesn’t let you move the camera out very far at all. While this was fine in SP’s block and panel days, that era is long gone and this simply is not adequate. Frankly I’d consider this one of SP’s biggest faults.
For the low low price of only 5% of your country's GDP
So you're telling me I can create the Republic of Shitfuckistan (territory: the corner of my bedroom) with a GDP of whatever spare change I throw into it periodically and forget about and get this missile for cheaper than a candy bar?
That’s great if you’re doing replicas, but not quite as useful for original works. That being said, being able to compare to the silhouettes of existing aircraft can be helpful.
@MarkTheDesignGuy Doing the FT would be immensely complicated.
I suppose you could use AGs to pose each limb... however that would be extremely difficult, especially if you wanted to pose to the finger. Don't forget how many degrees of freedom a humanoid body has. A lot.
@HuskyDynamics01 Poor part optimization? No, no! I'm simply bringing back the old art of stop motion! Now shut up and download the 30,000 part cube.
@Axartar Aight
@DecallViper This place is niche enough to not have so many outspokenly vile degenerates as other sites. It's slow, but overall much prefer it to other places.
@Kikikokikomarumaru15000 Our dearest friend Kei is simping for a digital deer person nobody has ever seen, is all.
total area of approximately 1.5 square kilometers and over 1000 buildings
My Laptop is shivering rn
what do you imagine the history of this city being like?
Couldn't tell you, but I certainly have a few ideas about its future. Most of them could be described as "explosive".
if you listen closely, you may hear her in Juno: New Origins
Oh, well, that provides a convenient excuse for the shrink...
These textures utilize normal mapping and physically based rendering (PBR) techniques to achieve a sense of depth and higher detail, despite the buildings being extremely simplistic behind the scenes.
Is that like where a wall responds to moving lighting as if it had bumps, when in reality it is completely flat?
@Boeing727200F "I want to escape the Nazis!" Moves to Poland
@SchmooveBrain Idolization of any country is a surefire way to be disappointed.
@X99STRIKER That is not very nice :(
Press him on why you should play. If he can't give you a good reason, don't.
Be wary of reasons about having something in common, don't get roped into enduring something you don't like because you feel obligated to have a common "interest".
Rotation sounds useful. Dunno how much I’ll use it but it’s good to have, especially seeing as the old WASD rotation seemed to essentially re-place parts in the same pattern causing faulty autoconnections.
So like middle mouse button but for camera placement? Will it be key bindable?
If that works how I’m interpreting that sounds very useful for posing models.
…
A suggestion I have for mirroring (alongside retaining an old-style button) would be something to show what the other part has for a value. I assume that, if in the gif, wheel size were altered while set to mirror mode both sides would suddenly snap to the same. I reckon it’d be good to show in parenthesis what the other side is at (I.e. 70% (100%) & 100% (70%)). I’m also reminded of how fuselage slicing will display the in-between value (I.e. between 100% and 50% it’ll be something like 75% displayed) which is neither correct nor allows you to change it while connected seeing as both parts will suddenly share the same slice.
…
The undo history looks very useful. While this will probably be bad for RAM, having to save vastly more craft files while playing, I’ll at least be able to know when I accidentally judged a part hundreds (or was it hundreds of thousands?) of kilometres forward causing my craft to shift backwards into the endless void, forcing me to undo until that step is gone.
…
Oh!
Will the editor be bigger?
Currently the editor has a tiny render distance and doesn’t let you move the camera out very far at all. While this was fine in SP’s block and panel days, that era is long gone and this simply is not adequate. Frankly I’d consider this one of SP’s biggest faults.
+2So you're telling me I can create the Republic of Shitfuckistan (territory: the corner of my bedroom) with a GDP of whatever spare change I throw into it periodically and forget about and get this missile for cheaper than a candy bar?
+2@Monarchii Christ that’s old. Yeah, it is a very demanding website. Everything lags, even on desktop, phones run hot. It’s not light work.
+2That’s great if you’re doing replicas, but not quite as useful for original works. That being said, being able to compare to the silhouettes of existing aircraft can be helpful.
+2The SpongeBob Squarepants Movie
+2@Ashdenpaw1 Damnit
+2We're hitting reverse and hitting lightspeed.
+2Pure 100% Khrushchevium.
+2Corn. It's made of corn.
@MarkTheDesignGuy Doing the FT would be immensely complicated.
+2I suppose you could use AGs to pose each limb... however that would be extremely difficult, especially if you wanted to pose to the finger. Don't forget how many degrees of freedom a humanoid body has. A lot.
@HuskyDynamics01 Poor part optimization? No, no! I'm simply bringing back the old art of stop motion! Now shut up and download the 30,000 part cube.
@Axartar Aight
@DecallViper This place is niche enough to not have so many outspokenly vile degenerates as other sites. It's slow, but overall much prefer it to other places.
+2@Kikikokikomarumaru15000 Our dearest friend Kei is simping for a digital deer person nobody has ever seen, is all.
Moss Point
+2@miloz13 Good news, Devs liked your 2019-vibe retro-future jet.
+2@Boeing727200F Not allowed to, or it’s considered a faux pas?
+2Cool looking!
+2@BOSSentinel Cool. They can go to hell so I don't care. If they fling more shit I'm reporting their ass and giving them no further mind.
+2@qpdb aren’t you supposed to be banned?
+2@crazyplaness I’m reasonably sure this guy is XEP
Insert overused joke about being underaged here
+2I’M LISTENING.
Ah crud, one of those “Oh-says”.
Hm.
I’m calling it, so much questionable stuff is gonna be done with this guy. War crimes, terrorism, gang violence,
Inappropriately placed joysticks.
+2Yep, he’ll be playing trombone in no time flat, mark my words. Dreadful, dreadful.
@FoxtrotTheSergal I necromanced again.
+2Someone I know used one of these cockpits, is all.
Ah, great. China-Taiwan nonsense on SimplePlanes.com.
+2Cease, please.
cool jets
+2@Rjenteissussy Why in tarnation did you censor die
+2Russia didn’t do anything, the plates did.
+2@Kerbango Must be the weather.
+2@crazyplaness Please, step into my shower :)
+2That looks nice.
+2@JayStream no no no, more German Corsair. We need more German Corsair.
+2I love that thing.
@BOSSentinel Ah, yes, that makes sense.
+2Nic car
+2MOOOAAAAAAAARRRRRRRR
+2MOAR
MOAR CANNON
+2This thing is so uncomfortable to look at
+2The hand of Andrew and a couple of D20s
+2@SamuelHayden Ding ding ding ding ding
+2Guh.
My Laptop is shivering rn
Couldn't tell you, but I certainly have a few ideas about its future. Most of them could be described as "explosive".
Oh, well, that provides a convenient excuse for the shrink...
Is that like where a wall responds to moving lighting as if it had bumps, when in reality it is completely flat?
Good I want to eat them hand them over
+2@SuperSuperTheSylph Have you tried mechanical advantage?
+2Smash, next question.
🔨
If I break the bones it cannot run nearly so easily. That pelt will be MINE.
+2@JP11 Poetry. Pure poetry.
+2Yeah I don't think that's a car bud
+2Incomprehensible, have a nice day.
+2@keiyronelleavgeek566 Someone else was using the brain. It needs to be passed around, I get it.
+2AH! THING!
+2Heads up, conversion therapy DOES NOT work.
+2"Dear people with OCD,
+2Fuck you.
Best regards, WinsWings."
@Jaspy190 SHHH!
+2Not in front of the lawyers!
Publishing after 21 minutes
+2@Boeing727200F "I want to escape the Nazis!"
+2Moves to Poland
@SchmooveBrain Idolization of any country is a surefire way to be disappointed.
@X99STRIKER That is not very nice :(
Press him on why you should play. If he can't give you a good reason, don't.
+2Be wary of reasons about having something in common, don't get roped into enduring something you don't like because you feel obligated to have a common "interest".
@Kikikokikomarumaru15000 who are those guys?
+2They steal our trademarks?!
WE’LL DESTROY THEM!