@DreamerIndusturies Although I am not the most experienced tank builder, if you need help, you can contact me, but I want to note for the future
1. If you are making coaxial weapons (for example, a cannon + a machine gun), put them on the same active group
2. You can try indicating the barrel length in calibers. Although this will not improve the appearance, it will improve the overall feel of the vehicle (The formula itself, although it’s embarrassing to call it a formula X * Y * 2 Where X means the barrel length in calibers, Y means the caliber in meters, for example, for a 120mm gun it will be 0.12. This way you will get the barrel length in conventional units for SP). 1-30 calibers are short barrels, 31-45 are medium-length, 46-80 are long barrels, 80+ are very long (80+ for coastal guns or for naval guns)
I don't understand that the maintenance of this tank is a quarter of its value, but I have a question: why is it so cheap or am I wildly overestimating the cost of tanks?
@Unwanted By the way, regarding the 1950s, I see that almost all MBTs have 150mm guns, although for the 1950s they should have been 90mm-125mm (the only MBT with a 150mm gun from real life that comes to my mind is the MBT-70 But he's from the late 1960-1970s)
@Unwanted Rheinmetall panzerwagen It was already ready, I think, but they didn't put it into production, and I honestly don't remember the Spähpanzer 1 C It seems like it was already an experimental tank / tank destroyer. I need to dig into the sources again
@voytek 90mm, 100mm, 105mm, 115mm, 120mm, 125mm, even 130mm are standard calibers for MBTs, but 150mm, 152mm, 155mm are usually used in artillery. I just wanted to say that the 150mm L/28 will be less effective against armour than the 120mm L/35 or 105mm L/45 (If you use APDS or APFSDS)
@voytek by the way, what about AMFK modifying the MBT-15 Chariot? Well, that is, AMFK requests licenses for the production and modernization of the product (with the possibility of testing it only for your market or the world market, depending on your preference)
Perma Tag list:
@Thedrmilpilot
@X99STRIKER
@Cripsoidus
Perma Tag list
@SchmooveBrain
@Mitterbin
@Trainz448
@Mitterbin I'm constantly amazed at how you and @SILVERPANZER respond to my posts so quickly
+1It should cost 4-8 times more.
@0V3R533R You understand that for these 20 thousand you can buy one 127 gun and maybe buy some more steel
Oke 2.9 meter is beter
@Unwanted 3.1 meter. He seemed to be lower...
@Unwanted wait a second
@Unwanted This turret is from another tank
If you want a perma tag, go here
Perma tag list
@SCtheONE
Perma Tag list:
@Thedrmilpilot
@X99STRIKER
@Cripsoidus
Perma Tag list
@SchmooveBrain
@Mitterbin
@Trainz448
@DreamerIndusturies Although I am not the most experienced tank builder, if you need help, you can contact me, but I want to note for the future
+11. If you are making coaxial weapons (for example, a cannon + a machine gun), put them on the same active group
2. You can try indicating the barrel length in calibers. Although this will not improve the appearance, it will improve the overall feel of the vehicle (The formula itself, although it’s embarrassing to call it a formula X * Y * 2 Where X means the barrel length in calibers, Y means the caliber in meters, for example, for a 120mm gun it will be 0.12. This way you will get the barrel length in conventional units for SP). 1-30 calibers are short barrels, 31-45 are medium-length, 46-80 are long barrels, 80+ are very long (80+ for coastal guns or for naval guns)
Not bad at all!
+1@0V3R533R WHY THE HELL DOES A TANK COST AS MUCH AS A 10 SNIPER RIFLE
Wait...
I don't understand that the maintenance of this tank is a quarter of its value, but I have a question: why is it so cheap or am I wildly overestimating the cost of tanks?
@Unwanted By the way, regarding the 1950s, I see that almost all MBTs have 150mm guns, although for the 1950s they should have been 90mm-125mm (the only MBT with a 150mm gun from real life that comes to my mind is the MBT-70 But he's from the late 1960-1970s)
I just realized that the V12 engine won't fit here, so I'll probably change it to a B8 or something.
@Unwanted Rheinmetall panzerwagen It was already ready, I think, but they didn't put it into production, and I honestly don't remember the Spähpanzer 1 C It seems like it was already an experimental tank / tank destroyer. I need to dig into the sources again
@Unwanted Spähpanzer 1 C, Rheinmetall panzerwagen,
@Mitterbin Maybe then I should make another submission too...
+1Blackbird
@0V3R533R
Very cool
Until I finish the new tanks I will throw Chariot today two and tomorrow also two
@voytek Then the choice of 150mm is clear, but I wanted to ask about the priority for the MBT-15 Chariot: speed or armor?
Although if you use HEAT or HE, then 150mm, 152mm, 155mm will be much better
@voytek 90mm, 100mm, 105mm, 115mm, 120mm, 125mm, even 130mm are standard calibers for MBTs, but 150mm, 152mm, 155mm are usually used in artillery. I just wanted to say that the 150mm L/28 will be less effective against armour than the 120mm L/35 or 105mm L/45 (If you use APDS or APFSDS)
@voytek oke
@voytek by the way, what about AMFK modifying the MBT-15 Chariot? Well, that is, AMFK requests licenses for the production and modernization of the product (with the possibility of testing it only for your market or the world market, depending on your preference)
I have a question why everyone puts 150mm guns on their MBTs?
Sweet-den:
@SomeSPguywholikeslore
Republic-Chill:
@Mitterbin
Bruh-zil:
@SuperSoli8
Tube-land:
@Schmoovebrain
General Corp. INC.
@Generalcorpinc
You-go-Slav-yeah
@NotRob119
Bristolian Empire:
@deutschFELLAtheLeopard2A7
Republic of For-Rants:
@keiyronelleavgeek566
Republic of Kinda:
@SamuelHayden
Socket Onion:
@DeeganWithABazooka
Rephaelis Defence:
@RB107
Kingdom of Pole-Land:
@BigHeadEngineering
Celestial empire:
@LunarEclipseSP
Jerry:
@RepublicofWrightIsles
Republic of Next-In-Co:
@Aeromax
Unity Steaks:
@Bugati87
Kingdom of Bell-Lands:
@SPWithLizzi
Yourpan:
@Unwanted
Republic of spin:
@B1BLancer
Swisher-man:
@Voytek
Check-or-slow-vak-air
@MIGFOXHOUND31BSM26
If you want to know about the classification, go here
If for some reason you want to know the composition of steel, go here
If you want a perma tag, go here
Perma tag list
@SCtheONE
Perma Tag list:
@Thedrmilpilot
@X99STRIKER
@Cripsoidus
Perma Tag list
@SchmooveBrain
@Mitterbin
@Trainz448
@Unwanted Oh, I already wrote your old nickname out of habit
@Mitterbin ?
+1I am waiting
+1I need your opinion too
@GeneralCorpInc
@Deeganwithabazooka
@BOSSentinel