@swgrainger dang ..props to you man...never imagined this is much harder to build than normal planes..the balance is hard to get..ive tried with wings and having issues but yours seems to use only fuselage for wings or theres a hidden wing somewhere??
|
|
Haha look since ive tred to make a trike & i know nothing about this type of aircraf especialy how controls work only basis is this link video how to fly trike
Ahh i reckon it will be something like your TT FT shop but with parts...different suspension types..springs...interior seats..intrumentations dashboard..so you can choose and build
This is Not FT but Why not use trim? Roll plane(ailerons) till almost vertical and use trim(elevator with trim enabled) to pitch up using trim so it can hold the input so the planes goes in a circle
Thu FT solution is may be interesting ..possibly may include using the combination of locking rudder(yaw)and aileron(roll) to turn plane in a circle all in one Activationgroup
@Highground hihi gave me chuckles.. in my surprise from that whoosh sound on that exhaust...ohh you should have added that big jet engine Blasto BFE300 for the turbo lag-like whistle sound when releasing power from car engine
Surprized it cant climb hills with the grip of those spheres have but this is innovative stuff which I like..reminds me the old builds with choppers with this rocket turning method
@Eiro ohh do tell if you know how to make it fast ...tried infinite rotator and increased it speed but the RPM still slow compared to engine...do pls give share me a link to your project that have very fast rotator
This is not funky tree but effect is similar
Example: rotator on activate AG8 ...since AG8 is ON by default inputROLL=turn. So do the inputROLL while still holding it turn-OFF AG8.this result it locking its angle until AG8 is turned-ON again`--ONLY Activating AG8 and with no inputROLL rotator angle returns to default 0 by it self
@M4g1sh here my 1st attempt at pushrod not tested..maybe you put that car unlisted so some can download it and help to the issue
Anyways here the link to my attempt clicky link
Hard to imagine for me ...but try connecting the top control bar (the one connecting to push rod) to the upper wishbone or the lower wishbone instead of connecting to the kingpin(the hub near the wheels)
like this one on this..picturelink----->clickylink pushrod on picture the pushrod is connected to the lower wishbone
Do say if it solved it or otherwise ...ive been trying studying this stuff as well
Was scanning past offroad car with trailing arm links and found this love the details on the interrior have to put a camera on the drivers seat...why this was not upvoted as much..btw nice work
@SenSkysh tried the icebase coords from default wright airport spawnlocation.. im on android so its difficult to drag slider back to neutral 0 on the vtol and trim..my number input is a bit off but managed to hit the ice island..on PC must be easy..good work on the FT codes
@DClass oh ..on android ...on 3rd screenshot and suceeding ones quickly spam tap the take another button on top right..adjust screenshot and before hitting done be ready to spam again...not timed correctly SP wont let you take another. seem possible you can take more than 6 but havent tried
Did you just copy and paste it? In my end.. have to manually input all of those those on android to work ...btw do tell if it worked for you so i can revise my notes From my notes
type /d then ok and choose Designer(Clone)
type /c then ok choose cameratarget
type /c then ok choose camera
type > then ok choose camera
type .set_fi then ok (doing .set_fi give 2 options rather than just typing .set which gives a long list)
find & choose set_fieldOfView(single) and space
type 20 then ok (20 to 40 looks good) (default is 60)
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
go to main menu... tap settings.... and tap "settings" text on top five times (enables/dissable developer console)
mobile 3 finger tap for console pop up Use for testing funky trees codes
++++++++++++sample
type d then ok
click debugexpression [string] then space and type "ceil(GS)"
( Looks like this debugexpression "ceil(GS)" )
then
ok then execute = Groundspeed rounded off on upper left corner
++++++++erase stringdebugger
type d then ok
click cleardebugexpressions then ok then execute = erase GSexpression
CHANGING FIELD OF VIEW ON DEBUGGER (mobile/android)
go to main menu... tap settings.... and tap "settings" text on top five times (enables/dissable developer console)
go on editmode and load plane
3 finger tap for console pop up
Type /d then ok and choose Designer(Clone)
type /c then ok choose cameratarget
type /c then ok choose camera
type > then ok choose camera
type .setf then ok find & choose setfieldOfView(single) and space
type 20 then ok (20 to 40 looks good) (default is 60)
thanks @jamesPLANESii on how to on post how to change field of view
@nagisa hehe thank you i cant understand the FT codes on those new gyros but ill try to study them...never thought of adding more gyros would work but you did it.. Thank you for your time..ragdoll stands up like a drunk wih its noodle-like legs haha funny..Thank you again
@nagisa if you have time can you pls check if it's possible to make this stand when it hits the ground? Tried with gyro all it can do so far is sit..and also needs feedback on this project clicky link ragdoll
@swgrainger dang ..props to you man...never imagined this is much harder to build than normal planes..the balance is hard to get..ive tried with wings and having issues but yours seems to use only fuselage for wings or theres a hidden wing somewhere??
|
|
Haha look since ive tred to make a trike & i know nothing about this type of aircraf especialy how controls work only basis is this link video how to fly trike
This is so cool Tag me if you publish
Very nice i may make something like this
Should have put tags on so it show up on search...will be a great candidate for auto aiming turret when 1.10 is released
Ahh i reckon it will be something like your TT FT shop but with parts...different suspension types..springs...interior seats..intrumentations dashboard..so you can choose and build
This is Not FT but Why not use trim? Roll plane(
ailerons) till almost vertical and use trim(elevatorwith trim enabled) to pitch up usingtrim so it can hold the inputso the planes goes in a circleThu FT solution is may be interesting ..possibly may include using the combination of locking rudder(yaw)and aileron(roll) to turn plane in a circle all in one Activationgroup
Yass!!! Glass and explodescale on other weapons ...hoping FT guys can finally make a working autoaiming turret for gunships planes and AA vehicles
@Highground hihi gave me chuckles.. in my surprise from that whoosh sound on that exhaust...ohh you should have added that big jet engine Blasto BFE300 for the turbo lag-like whistle sound when releasing power from car engine
Surprized it cant climb hills with the grip of those spheres have but this is innovative stuff which I like..reminds me the old builds with choppers with this rocket turning method
@LiftedCars seem this uses the differential to turn rather than the ackermann steering mechanism? Looks very complex
Innovation is always a plus for me...props for not giving-up on a build...sadly i cant run it thu
@Eiro ohh do tell if you know how to make it fast ...tried infinite rotator and increased it speed but the RPM still slow compared to engine...do pls give share me a link to your project that have very fast rotator
@Jauntyccmbr check the limbs on this one
articulated ragdolldummy quad riderive limited the motions on hinges and rotators >>>>link<<<<Is this fine? >>>>Click for direct link----<<<<<
@Hellosss38 oh fixed by FT? how?
This is not funky tree but effect is similar
Example: rotator on activate AG8 ...since AG8 is ON by default inputROLL=turn. So
do the inputROLL while still holding it turn-OFF AG8.this result itlocking its angleuntil AG8 is turned-ON again`--ONLY Activating AG8 and with no inputROLL rotator angle returns to default 0 by it self@M4g1sh here my 1st attempt at pushrod not tested..maybe you put that car unlisted so some can download it and help to the issue
Anyways here the link to my attempt clicky link
@M4g1sh perhaps something is unintentionally connected to a some part somewhere?
Hard to imagine for me ...but
try connectingthe top control bar (the one connecting to push rod)to the upper wishbone or the lower wishbone insteadof connecting to the kingpin(the hub near the wheels)like this one on this..picturelink----->clickylink pushrod on picture the pushrod is connected to the lower wishbone
Do say if it solved it or otherwise...ive been trying studying this stuff as wellWas scanning past offroad car with trailing arm links and found this love the details on the interrior have to put a camera on the drivers seat...why this was not upvoted as much..btw nice work
@Sm10684 kinda based my hammers buggy on the mudmarro with its steering but i dont have the skill to make the camarro body.
that lambo or wth to call that thing looks strange and cool..maybe get you some ideas
Hmmm..maybe
Mudmarro (used hummer suspension with rear steer& camarro body------> clickylink
OR600hp lambo-shape offroad truck(seems custom made)---->clickylink
Can you please on video..also give explaination on "nested" IF Else statements with 4 conditions or more?...I having issue with more than 3
Really looks nice and being low part build is a plus for me
Nice a low part classic car..awesome retractable roof too
Ive still to make something like this for skydiving dummy but lost interest...btw nice part count and flies well
the right joystick must be for steer and pitch??? Wondering what Yaw (left joystick) is...must be control for rotator or airbrake
Nice another innovative suspension ...innovations should get wayy more upvotes
This is a good idea..hoping youll do more of this
looks wonderful and drives well
Im about to download then holy c...1791 part
Nice something new!
Cool ...nice to see new stuff here.. thats pretty unique suspension you got there..also survived a 30ft straightdrop
Nice .. Where is that propeller engine located and is it a new function that you not mentioned on description?
@SenSkysh tried the icebase coords from default wright airport spawnlocation.. im on android so its difficult to drag slider back to neutral 0 on the vtol and trim..my number input is a bit off but managed to hit the ice island..on PC must be easy..good work on the FT codes
@SenSkysh ow do you know some target coordinates?
@DClass anyways have you seen any thing like a bug or recommendation on the car build? TY in advance
@DClass oh ..on android ...on 3rd screenshot and suceeding ones quickly spam tap the
take another buttonon top right..adjust screenshot andbefore hitting done be ready to spam again...not timed correctly SP wont let you take another. seem possible you can take more than 6 but havent triedNice this can yaw turn!...did you used gyro for yaw turn? Or is it something else?
What a pleasant surprise and gigled on that samsumg thingy on handlebars. nice smooth rider movement as well
@232287168147825 you said on description _ "Android version is REMOVED due to bugs. There will not be android support in the future for my mods."_
Me sad and most likely all android users
@brians1209 havent tried that though
idk why just pasting it wont work ..on FoV manually inputing it is annoying
Did you just copy and paste it? In my end.. have to manually input all of those those on android to work ...btw do tell if it worked for you so i can revise my notes
From my notestype
/dthen ok and chooseDesigner(Clone)type
/cthen okchoose cameratargettype
/cthen okchoose cameratype
>then okchoose cameratype
.set_fithen ok(doing
.set_figive 2 options rather than just typing.setwhich gives a long list)find & choose
set_fieldOfView(single)and spacetype 20 then ok (20 to 40 looks good) (default is 60)
@Belloaka try substitute the ok into enter...found debugger usefull in funkytree if the string is wrong it wont show on upperleft
@Belloaka it will work same ...just dfference is how to enable console
This is from my personal notes (mobile)
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
go to main menu... tap settings.... and tap "settings" text on top five times (enables/dissable developer console)
mobile 3 finger tap for console pop up
Use for testing funky trees codes++++++++++++sample
type d then ok
click debugexpression [string] then space and type "ceil(GS)"
( Looks like this debugexpression "ceil(GS)" )
then
ok then execute = Groundspeed rounded off on upper left corner
++++++++erase stringdebugger
type d then ok
click cleardebugexpressions then ok then execute = erase GSexpression
CHANGING FIELD OF VIEW ON DEBUGGER(mobile/android)go to main menu... tap settings.... and tap "settings" text on top five times (enables/dissable developer console)
go on editmode and load plane
3 finger tap for console pop up
Type /d then ok and choose Designer(Clone)
type /c then ok choose cameratarget
type /c then ok choose camera
type > then ok choose camera
type .setf then ok find & choose setfieldOfView(single) and space
type 20 then ok (20 to 40 looks good) (default is 60)
thanks @jamesPLANESii on how to on post how to change field of view
@JaeBeansS ow yeah ..I'll try that
part colision response is set to "none" in this..the cockpit"the hat" thu detaches on purpose
Nice details on a low part count build. Anyways where is the car engine located?
@nagisa hehe thank you i cant understand the FT codes on those new gyros but ill try to study them...never thought of adding more gyros would work but you did it.. Thank you for your time..ragdoll stands up like a drunk wih its noodle-like legs haha funny..Thank you again
@nagisa if you have time can you pls check if it's possible to make this stand when it hits the ground? Tried with gyro all it can do so far is sit..and also needs feedback on this project clicky link ragdoll