I'm working on a flying runway to but I need to shorten it! 1000 ft length and 150 ft wide makes it very problematic for building. I think i should give it either the length of the tiny or the Titan because. the half Yeager scail is too hard on the game. As well as I can't get my parts to connect properly! May I get some ideas on what to and not do?
Thanks I appreciate this very mutch! as for upvotes it's always been like this for some reason. A Lot of these are three to four hour projects that I work hard on. I think That the main problem here is that theirs a lack of followers on my profile and I could use a shout out or two to just expand the profile so my creations don't get buried as badly in all the posts during the day. All the help I can get counts and it's all EXTREMELY APPRECIATED as I hope you understand. @BogdanX
I think it wouldn't be as likely to lag if it's coded in a simple fashion. heres a example if the impact just changes the dihedral of the wing in till it hits a set max angle .When that max is hit or exceeded it would break off. That way it wouldn't affect performance and it would be easy on the devs. @Ihatelava123isacommunist
@BaconAircraft If it's fine with you may I ask for ideas for my color scheme I've always liked my red, orange and black but I feel like Their needs a little something else. maybe I need I to look at a diffrent color scheme then the casual PHOENIX that I use.
I might as well just take this down because it think it's a hardware issue and that I should prabably get a proper internet card instead of usb Internet @HellFireKoder
I switched it to the global ip it's but it still doesn't seem to be working I'm looking at the server EXE to see if theirs a issue and from what it looks like the UPnP gateway wasn't found @HellFireKoder
@HellFireKoder my mistake (again) I looked up the global and it didn't work! as well as earlier it gave me a IPv6 instead of a IPv4 my apologys for all the issues
@Seraphinium until my laptop updates I can't test it on another computor so for now I'm kind of stuck until I can figure out why my global IP is acting up
@Seraphinium @HellFireKoder
I fixed it the global ip I searched was wrong so I had to go back and look at the server to see what ip it was useing and it was a diffrent ip thain what the search told me and now I got it tested and working
@MechWARRIOR57 ok I changed it to another big user
Thanks @Flightsonic
@Flightsonic sory for butting in like this but is the server up right now? It's been down for most of the day.
That's awesome @jamesPLANESii
@MrSilverWolf @TheBigEgg thank you this took a lot of time and effort
@ChunderDownUndeR lol I saw my plane in the background of one of the pictures I find it funny how small it is compared to this
Thanks @Treadmill103
Thanks I didn't notice great attention to detail there @ForeverPie
Yup @jamesPLANESii
thanks @CaptainFrosty
AWSOME my dads a pilot and I've logged about 4hrs so far in a piper arrow
Some times it can be you're keyboard try plugging in another one it's part of why I use x52 proflight HOTAS and proflight pedals
I'd say 7 sometimes my planes take longer due to being busy IRL but at that point it stretches out the time period another couple of hours
@ShatSlanger thanks
@letsgofast11 I had the same problem on my laptop testing it try starting and useing the dev console use the Connect command
@DandruffCat btw the test plane crashed the game twice due to having huge fine tuned massive parts
@DandruffCat thanks
I'm working on a flying runway to but I need to shorten it! 1000 ft length and 150 ft wide makes it very problematic for building. I think i should give it either the length of the tiny or the Titan because. the half Yeager scail is too hard on the game. As well as I can't get my parts to connect properly! May I get some ideas on what to and not do?
I looked it up and German tracers are yellow,orange ,green,white and red@BogdanX and thanks for the note
As for the guns I prabably should have looked up the German cannon tracer color @BogdanX
Here's a question did you notice how the camra moves to the roll effects are a realism experiment @BogdanX
Thanks I appreciate this very mutch! as for upvotes it's always been like this for some reason. A Lot of these are three to four hour projects that I work hard on. I think That the main problem here is that theirs a lack of followers on my profile and I could use a shout out or two to just expand the profile so my creations don't get buried as badly in all the posts during the day. All the help I can get counts and it's all EXTREMELY APPRECIATED as I hope you understand. @BogdanX
Yup that's why I think it would make a good option because my aircraft feature cockpits and moving parts @Sunnyskies
I think it wouldn't be as likely to lag if it's coded in a simple fashion. heres a example if the impact just changes the dihedral of the wing in till it hits a set max angle .When that max is hit or exceeded it would break off. That way it wouldn't affect performance and it would be easy on the devs. @Ihatelava123isacommunist
I'm not even sure if that's even possible @gazagold13
THANKS it was a very fun challenge for me and I'm glad you like it@gazagold13
Thanks @Mumpsy
Thanks @4404
@BaconAircraft If it's fine with you may I ask for ideas for my color scheme I've always liked my red, orange and black but I feel like Their needs a little something else. maybe I need I to look at a diffrent color scheme then the casual PHOENIX that I use.
Yeah I could @MechWARRIOR57
I have theirs only two left @MechWARRIOR57
A huge amount of servers have been disappearing from the forums @MechWARRIOR57
I might as well just take this down because it think it's a hardware issue and that I should prabably get a proper internet card instead of usb Internet @HellFireKoder
Testing it but it still won't open the ports right I think it might be my internet adapter and that its usb is my guess @HellFireKoder
Ok it ran it through hamachi and it seems to be working but just to makes sure I'll test it on my vista laptop @HellFireKoder
I switched it to the global ip it's but it still doesn't seem to be working I'm looking at the server EXE to see if theirs a issue and from what it looks like the UPnP gateway wasn't found @HellFireKoder
@HellFireKoder my mistake (again) I looked up the global and it didn't work! as well as earlier it gave me a IPv6 instead of a IPv4 my apologys for all the issues
@Seraphinium until my laptop updates I can't test it on another computor so for now I'm kind of stuck until I can figure out why my global IP is acting up
Ugh trying to figure out what's wrong with it in computorasurus REX @poenix
I'm going to pull out my lap top and check it out @Seraphinium
I could have sworn it was working @Seraphinium
And that was very mutch a pain to get to work
@Seraphinium @HellFireKoder
I fixed it the global ip I searched was wrong so I had to go back and look at the server to see what ip it was useing and it was a diffrent ip thain what the search told me and now I got it tested and working
So I looked up the global ip and I put it in but it's still not working @HellFireKoder
@Seraphinium this is strange it's the global ip but it's not working
@Seraphinium I think I need to look back at it because I searched it but testing it it doesn't work
@Seraphinium fixed
@HellFireKoder fixed it I looked it up wrong
It just gave me a very long ip that doesn't look like the ones that we use @HellFireKoder
Thx @HellFireKoder