@Liquidfox @RandyAndSonsAircraft Thank you! At first I tried to do with delta wings. But 5,000 mph wings were broken and did not allow me maneuverability I wanted. Reducing the size of the wing surface and improving the result.
@BogdanX btw, check out this photo . If you look at the surface you say is roll also acts as pitch. Pitch detail of F-16. The new version of F- 16 overcomes all problems. Thanks for the help.
@Johndfg sorry my friend. If it makes you feel better. It is taking me a long time to manufacture these aircraft. I still have not an ideal candidate for the race. I would create a plane that always make 1:43 and flew to 758mph. I'm behind it, but I'm not sure to get it.
@Johndfg @Typhlosion130 @AviownCorp @Tully2001 @EnderWiggin Thank you very much to all! This is probably the best aircraft that I have built for the race "Bandit run". Although its maximum speed is not the highest, it does have a great maneuverability that allows you to reduce the time. Thanks again!
Thanks! @BaconAircrafts @TTHHSSSS @AviownCorp @Quintasoarus I have not been able to improve the drag coefficient, but I think it is a competitive plane.
Thanks @VailinPeral usually use negative weights to improve the performance of the replicas. But it is not a secret, is available in https://www.simpleplanes.com/a/M45KGP/Parts-Lost-and-Found-Fuel-Cells
However if it is to make a plane fly really well for a tournament without design limitations, I think I can do quite well ;-)
Thanks all! @ollyvalentine @Harharhoman @EternalDarkness @Sunnyskies @ElGatoVolador @Johndfg @zed @grizzlitn @AviownCorp @RAF1 @oDDDynamics @Cplgocho @ACMECo1940 @SimpleFlow @Himynameiswalrus This aircraft has been very difficult to manufacture. The landing gear has been made specifically for the plane. On the other hand I have tried to maintain the maneuverability that has the original. I hope you like it and enjoy it as much as I do. Thanks again!
@Liquidfox @RandyAndSonsAircraft Thank you! At first I tried to do with delta wings. But 5,000 mph wings were broken and did not allow me maneuverability I wanted. Reducing the size of the wing surface and improving the result.
Very Nice!
@BogdanX no problem ;-)
@Cplgocho ;-) thanks!
Thanks! @PINK
I was referring to the original so well resolved is it ;-)
@Supermini555 Thanks!
I really like this plane. It's very original. Good job
Thank you! @BaconAircrafts
@BogdanX btw, check out this photo . If you look at the surface you say is roll also acts as pitch. Pitch detail of F-16. The new version of F- 16 overcomes all problems. Thanks for the help.
@BogdanX You are right, tomorrow will Fix this problem, i find it. I had an oversight. Sorry 🙃
Thank you!! @oDDDynamics
Good plane!
Bonito Mirage F-1!
Thanks all! @KnightOfAraluen The thing sticking out its refueling probe. Allows the plane refueled in flight. Look at this Mirage 2000 of Armée de l'air
I will make an F-16 for you 😉
Thanks for your support @adamcurpier @JShay and @Ninja1235678
Thank you @Ownedpilot It has been this exciting tournament
Very cool!
Congratulations! Good race!
Thank you! @Johndfg Good luck! ;-)
@Quintasoarus This plane is less powerfull than this one https://www.simpleplanes.com/a/mfvhH3/Mbo-Piston-Contra-6-mk4-R
Cool plane! ;-)
Thank you very much!! @SPCWorkshops @MEGANOOB @Pearl @SimpleFlow @BaconAircrafts @DestinyAviation @SkullHunter29 @SteadfastContracting :-)
@Johndfg sorry my friend. If it makes you feel better. It is taking me a long time to manufacture these aircraft. I still have not an ideal candidate for the race. I would create a plane that always make 1:43 and flew to 758mph. I'm behind it, but I'm not sure to get it.
Impresive!
@Johndfg @Typhlosion130 @AviownCorp @Tully2001 @EnderWiggin Thank you very much to all! This is probably the best aircraft that I have built for the race "Bandit run". Although its maximum speed is not the highest, it does have a great maneuverability that allows you to reduce the time. Thanks again!
Thanks! @BaconAircrafts @TTHHSSSS @AviownCorp @Quintasoarus I have not been able to improve the drag coefficient, but I think it is a competitive plane.
Thanks all! @bjac0 @TheRussianBrothers69 @BaconAircrafts @Jetspeed1001 @TAplanes @JMicah4 @SteadfastContracting @metalsaurus @oDDDynamics @General360 @AviownCorp @GearGuy123 @EternalDarkness @Ichko @DestinyAviation @Pearl @Cplgocho
Now i building a Blohm & Voss P.212 i hope you like this next ;-) enjoy it!
@Typhlosion130 @Tully2001 I have the feeling that the race will be very close
Precious!!!!
@Typhlosion130 there are 3 engines ;-)
F-16 its your favorite plane?
Got 1:43 or 1:44 aprox
Thanks @VailinPeral usually use negative weights to improve the performance of the replicas. But it is not a secret, is available in https://www.simpleplanes.com/a/M45KGP/Parts-Lost-and-Found-Fuel-Cells
However if it is to make a plane fly really well for a tournament without design limitations, I think I can do quite well ;-)
@BogdanX it's fixed in the next version with semi-symmetrical wings. Thanks!
Pretty! ;-)
@BaconAircrafts Ok no problem ;-) Thanks
may i send other plane??? :-)
Thank you! @BaconAircrafts 😉
I am building a "Fw Project VII Flitzer" its allowed?
Pretty!! Very nice!
Thank you very much! @Odge
Excellent design and flight. Feature now! Good job! You have a new follower
Jejeje very nice!
Thanks for your support! @BaconEggs @General360
Thanks all! The next version you will like more. I just correct the forward fuselage and some details. Sorry, I hope you like it! ;-)
Hi @Harharhoman no problem. Will make a new part relative to landing gear ;-)
Thanks all! @ollyvalentine @Harharhoman @EternalDarkness @Sunnyskies @ElGatoVolador @Johndfg @zed @grizzlitn @AviownCorp @RAF1 @oDDDynamics @Cplgocho @ACMECo1940 @SimpleFlow @Himynameiswalrus This aircraft has been very difficult to manufacture. The landing gear has been made specifically for the plane. On the other hand I have tried to maintain the maneuverability that has the original. I hope you like it and enjoy it as much as I do. Thanks again!
Me encanta!!