I did not plan on the aircraft being exactly 4500 parts, but here it is.
System requirements- I5 6400 or better, GTX 1060 6gb or better.
Recommended: Infinity
Recommended settings: all maximum, MSAA X8, real-time reflections.
Yes, there are some small issues, but real life must come before SP. I am leaving to boarding school nine hours after making this comment, haven't packed and haven't slept. I cannot fix everything, though I wish I could.
@Panizon Yep. This single component has more parts than entire aircraft! My goal is 4321 or 4444 parts. It will be released on Thursday. (August 6)
@asteroidbook345 Thank you!
@SodiumChloride
this- 1082
Wings-900 (yes, the wings are 450 each)
Rest of cockpit so far- 1771 (overhead panel is 1000, main panel is 770)
Fuselage-200 (relatively simple)
3953 parts, you're right I will not make the 4000 part goal, new goal is 4321.
@MasterAvicenna Pw2000 is nice, I sat right next to them on a delta 757 last year and they made me smile uncontrollably. JT8D sounds just about as good, probably better though.
@asteroidbook345 Correct, three days till post. I will actually post on Thursday, because I'll be flying on Jetblue back to school early morning on Friday. Expect post late Thursday, between 5pm-12pm est. I don't have time to make RB211 before release, but I might be able to do it later in the year.
@HorizonWXR
@HorizonOfficial
This plane is absolutely great. These high quality, 1000+ part airliners are what I like to see on SP. Very good job. Maybe consider adding full interior next time?
@TheKugelblitz This will not run on any phone, most likely not even an iPhone 11 Pro Max. Try and borrow your parents' pc. As long as you have an I5 6th gen+ and a GTX 1060 6GB+, you can run this fine. 8GB RAM is recommended, as this plane's model is actually a higher amount of MB than FSX/P3d Airplane models. There will be a system requirements page for those wondering. @FireFast212 Go ahead and send.
@TheKugelblitz Yes, the complete model so far has 3200 parts, and the cockpit and details are not finished.
@CRJ900Pilot
-Landing gear wobbles, but it won't be an issue because that part will be covered. I did increase mass.
-smoothing it out now.
-Thinned!
-Intake fixed, working on exhaust now, I know what you mean
-fighting fixed, I didn't know it was visible outside the editor.
rotators hidden, I'll work on making the landing gear more realistic now.
@PlaneFlightX Thank you for the feedback! I will be redoing a lot of the funky trees control system (which will take hours) but I will be able to get most cockpit instruments working (already did artificial horizon, trim indicator, light switches, etc.) You might have seen that I have designed an autoland system for this aircraft.
@Thecatbaron Changing it now, thanks for the feedback! Really appreciated! I don't know how to "triangulate" the wing so I did it this kinda weird way. I might do a redo of the wings this Christmas, because some parts of the outboard flaps are a bit off.
Please let me know if there is anything I can improve. The final aircraft will be released in six days, and will have about 4000 parts. This is the PW2000 version, would you guys also want an RB211 version?
@Thebigassflyer Just make sure you pay as much attention to detail as possible. Use reference images from multiple angles, and make sure every single screw and switch is accurately done.
@ChrisPy yeah I feel like this thing is just an upvote magnet with a crap ton of parts and if you fly it, the illusion falls apart. If you take a look at the A330 Finn made you'll see a post of mine explaining that one as well. He is very good at detail but not at actual flight performance. If he focuses more work on the flight dynamics it will be much better.
@FinnReignSUPREME I think you are doing well at outside appearance, but the flight dynamics need fixing. This plane is pretty unresponsive and doesn't control correctly.
@FinnReignSUPREME The livery is very good but I believe everything else is a bit off. Landing gear retraction, tilt, and strut covers are not correct, cockpit has ?4? thrust levers, tail and engines are quite off in shape, etc. This is an Airbus, why does it have a yoke?? Ailerons point the wrong way when turning. I think you could make much better builds if you focus more on the model. It looks great from the screenshots and has very good livery, but once you start to fly it, it kinda falls apart since it has 3.9K parts and has basic things wrong like yokes AND sidesticks.
@jelybaca I meant that you are starting out the same way Qingyu is, by building airliners and getting better and better lol
It's unlisted currently, you are now tagged on it.
it's a PW2000 -200, and it's the version with 3 main doors and two overwing exits.
@BubbleLukasie The computer I am using for building individual modules is an Intel Celeron running at 2.5 Ghz boost with 4GB DDR3 RAM, a 128GB SSD, and no graphics card.
However, the computer that I assemble all the modules on is an I5 6400 with a GTX 1060 and 16GB RAM.
If you have a I5 6th gen+ and a GTX 1060 6GB+ You will have no issues with performance.
@jelybaca Glad I came back to this, didn't see your comment because the tag was not my username.
Trust me, I'm not offended at all. In fact, I like to be updated about all 757 and especially since it came from you, the next Qingyu. Different detail builds take different amounts of time, so I don't think it'd be rude. Mind if I tag you on my latest update for my 757? When it comes out I'd really like for you to make a low detail version (maybe about 800 parts). To me, that's your best strong suit, making builds the average person can actually enjoy as compared to some other 1K+ builds.
@asteroidbook345 Thank you, although this project is taking a toll on me. I don't really want to finish it, but I know it will be the best airliner ever on SP. It might even be the most accurate cockpit replica.
@PointlessWhyShouldi Currently I'm on school break, I will have work next week though so don't expect much updates.
@CenturyAerospace
@WereOutOfNames
@2Papi2Chulo
@PointlessWhyShouldi
@DerVito
@CrushburnHQ
I did not plan on the aircraft being exactly 4500 parts, but here it is.
System requirements- I5 6400 or better, GTX 1060 6gb or better.
Recommended: Infinity
Recommended settings: all maximum, MSAA X8, real-time reflections.
Yes, there are some small issues, but real life must come before SP. I am leaving to boarding school nine hours after making this comment, haven't packed and haven't slept. I cannot fix everything, though I wish I could.
@PlaneFlightX Thanks!
@Wallaby I can run it at 25 FPS medium settings, 20 high.
@metaphysicalgnome updated by comment below, it will not run on your phone. It needs a device with a dedicated graphics card. GTX 1060+
@metaphysicalgnome a few hours, before midnight est, it will not run on your phone. It needs a device with a dedicated graphics card.
@metaphysicalgnome Yes if you have I5 6400 or better
@metaphysicalgnome 4107 so far
@Lazer22 4k posting today
+1@Raptor787 ofc
@Alta2809 I am building the rest and it will be released tomorrow.
+1@ACEPILOT109 36 hours and it will be.
@TheKugelblitz lol sorry fam
@Panizon Yep. This single component has more parts than entire aircraft! My goal is 4321 or 4444 parts. It will be released on Thursday. (August 6)
@asteroidbook345 Thank you!
@SodiumChloride
this- 1082
Wings-900 (yes, the wings are 450 each)
Rest of cockpit so far- 1771 (overhead panel is 1000, main panel is 770)
Fuselage-200 (relatively simple)
3953 parts, you're right I will not make the 4000 part goal, new goal is 4321.
@Hedero Thank you very much. It is actually 1/4 of the airplane's part count.
@Userofplanes Absolutely. 4000 parts.
@asteroidbook345 yeah I've been trying to fix that but I can't. I'm not sure how to, but I'll keep trying.
@asteroidbook345 They do, you'll be fine, read the pinned comment for system requirements.
@Panizon Idk it will need to be an easy one cause I'm running out of timeeeee Might just do delta
@MasterAvicenna Pw2000 is nice, I sat right next to them on a delta 757 last year and they made me smile uncontrollably. JT8D sounds just about as good, probably better though.
+1@asteroidbook345 Correct, three days till post. I will actually post on Thursday, because I'll be flying on Jetblue back to school early morning on Friday. Expect post late Thursday, between 5pm-12pm est. I don't have time to make RB211 before release, but I might be able to do it later in the year.
@TheKugelblitz I can't make an 800 part version, the wings alone are 900 parts. And if I take things off, they will look REALLY bad.
@HorizonWXR
+1@HorizonOfficial
This plane is absolutely great. These high quality, 1000+ part airliners are what I like to see on SP. Very good job. Maybe consider adding full interior next time?
@TheKugelblitz This will not run on any phone, most likely not even an iPhone 11 Pro Max. Try and borrow your parents' pc. As long as you have an I5 6th gen+ and a GTX 1060 6GB+, you can run this fine. 8GB RAM is recommended, as this plane's model is actually a higher amount of MB than FSX/P3d Airplane models. There will be a system requirements page for those wondering. @FireFast212 Go ahead and send.
@Panizon I've been busy with high school, doing my senior year this year.
@Panizon The minimum I can make on the 757 is about 1200-1500, you'll be fine in that case!
@FireFast212 If you look at my profile, you can find some things that I've been doing step by step. What do you need help with exactly?
@CRJ900Pilot check description, it's already done.
@TheKugelblitz Yes, the complete model so far has 3200 parts, and the cockpit and details are not finished.
@CRJ900Pilot
-Landing gear wobbles, but it won't be an issue because that part will be covered. I did increase mass.
-smoothing it out now.
-Thinned!
-Intake fixed, working on exhaust now, I know what you mean
-fighting fixed, I didn't know it was visible outside the editor.
rotators hidden, I'll work on making the landing gear more realistic now.
@Panizon Not really, maximum parts about 900, I can give you that if you want.
@PlaneFlightX Absolutely! I cannot do the livery for you though, as I go back to school in five days.
+1@PlaneFlightX Thank you for the feedback! I will be redoing a lot of the funky trees control system (which will take hours) but I will be able to get most cockpit instruments working (already did artificial horizon, trim indicator, light switches, etc.) You might have seen that I have designed an autoland system for this aircraft.
+1@Thecatbaron Changing it now, thanks for the feedback! Really appreciated! I don't know how to "triangulate" the wing so I did it this kinda weird way. I might do a redo of the wings this Christmas, because some parts of the outboard flaps are a bit off.
@CenturyAerospace You are very good for a silver user. Thank you for your contribution. The nose is very smooth and nice. How long did this take you?
+1Please let me know if there is anything I can improve. The final aircraft will be released in six days, and will have about 4000 parts. This is the PW2000 version, would you guys also want an RB211 version?
@Thebigassflyer Just make sure you pay as much attention to detail as possible. Use reference images from multiple angles, and make sure every single screw and switch is accurately done.
@ChrisPy yeah I feel like this thing is just an upvote magnet with a crap ton of parts and if you fly it, the illusion falls apart. If you take a look at the A330 Finn made you'll see a post of mine explaining that one as well. He is very good at detail but not at actual flight performance. If he focuses more work on the flight dynamics it will be much better.
+4@FinnReignSUPREME I think you are doing well at outside appearance, but the flight dynamics need fixing. This plane is pretty unresponsive and doesn't control correctly.
@FinnReignSUPREME The livery is very good but I believe everything else is a bit off. Landing gear retraction, tilt, and strut covers are not correct, cockpit has ?4? thrust levers, tail and engines are quite off in shape, etc. This is an Airbus, why does it have a yoke?? Ailerons point the wrong way when turning. I think you could make much better builds if you focus more on the model. It looks great from the screenshots and has very good livery, but once you start to fly it, it kinda falls apart since it has 3.9K parts and has basic things wrong like yokes AND sidesticks.
Second Airliner ever to 300... 2:05AM UTC, Tuesday, July 21, 2020
@jamesPLANESii 3.7 years later it is still the first thing to come up on search
"Madagascar Lockheed Electra"
@jelybaca I meant that you are starting out the same way Qingyu is, by building airliners and getting better and better lol
It's unlisted currently, you are now tagged on it.
it's a PW2000 -200, and it's the version with 3 main doors and two overwing exits.
@BubbleLukasie The computer I am using for building individual modules is an Intel Celeron running at 2.5 Ghz boost with 4GB DDR3 RAM, a 128GB SSD, and no graphics card.
However, the computer that I assemble all the modules on is an I5 6400 with a GTX 1060 and 16GB RAM.
If you have a I5 6th gen+ and a GTX 1060 6GB+ You will have no issues with performance.
if this is realistic its gonna have a million parts
@JustDatGuy
@jelybaca Glad I came back to this, didn't see your comment because the tag was not my username.
Trust me, I'm not offended at all. In fact, I like to be updated about all 757 and especially since it came from you, the next Qingyu. Different detail builds take different amounts of time, so I don't think it'd be rude. Mind if I tag you on my latest update for my 757? When it comes out I'd really like for you to make a low detail version (maybe about 800 parts). To me, that's your best strong suit, making builds the average person can actually enjoy as compared to some other 1K+ builds.
@jelybaca why you no tag me :( take my upvote
@UwU @2Papi2Chulo Thank you for your Ts! the airplane will be over 3,000 parts and if I add interior, it will be above 7,000.
@LOTUS Nice, but it's very hard to taxi as the landing gear are so close together=short wheelbase.
@asteroidbook345 Thank you!
@asteroidbook345 Thank you, although this project is taking a toll on me. I don't really want to finish it, but I know it will be the best airliner ever on SP. It might even be the most accurate cockpit replica.
@PointlessWhyShouldi Currently I'm on school break, I will have work next week though so don't expect much updates.
"We didn't penetrate their armor"
+1@FinnDuanyu7373 You don't know how scared I am in WOT when I see one of these and I'm a Tier V...
+3