how to solve a problem:
step 1:
identify the problem
step 2:
study the problem
step 3:
try a method you know
step 4:
if it doesn't work, do either:
- look into people's builds and see how they do it
- ask
step 5:
profit
depends.
don't ask other people, ask yourself. do you still want to do this? if yes then don't (and also that's stupid because you're just looking for clout), if no, then do whatever the fuck you want, nobody's stopping like real bruh
yknow,
wish I could try it out, but my phone would explode.
even with the lowest, 960 parts, I wouldn't be able to fly as comfortably due to the immense lag caused by this masterpiece.
truly a shame.
that is definitely an old technique
you rarely see those these days because of how much convenience is there
as for the help, sorry, no can do on the cockpit aspect
I can help on weapons though, as I'm also making a Typhoon rn
there's a property for the beacon and formation light, which is called input
so the first step is grab a beacon light, go to the xml of the beacon light, go to the BeaconLights section, and in the input property, change the value from None to VTOL>0.49
you're welcome
little lore I made up just because I'm bored:
the XV-2A was originally developed as a prototype aircraft, it served as a testbed for a VTOL technology AAI have been taking interest in lately
however, the prototype crashed, due to hydraulical failure during it's 3rd flight, causing the RCS nozzles and all control surfaces to stop functioning, pilot ejected
after the crash, AAI thought of making a second one (which explains why there is still another prototype of it), but they stopped midway because they realized it was too expensive to make and considering the finances of the company, they might not be able to recover once they commited onto it
after the alliance invasion of Yeager, AAI realized they might be able to continue the program, but the concern for an invasion against Staneland provoked one of the higher ups to transport the XV-2A to Yeager and hid it inside the hangar, safe against surveilance cameras, along with the mockup
after the annexation of Staneland, AAI was forced to join the side of the UFSR in order to survive, and gave plans for new aircrafts to the higher ups
the higher ups took interest in the XV-2A and asked AAI to make it again, however AAI refused due to the company's financial issue (which is barely holding on), and instead told them about the existing XV-2A mockup and second unfinished prototype stored at Yeager
the blueprints at this point was already handed to the higher ups, but the instructions were unclear to them, and as such they needed the mockup and the 2nd airframe to continue researching it
Yeager was retaken, and the XV-2A had been retrieved by Fortis
the next problem however, is who is going to research this thing?
Yekavlov was ready to answer that question and took full responsibility for the research and production of a new VTOL fighter
as a means to reduce cost, AAI helped Yekavlov in producing the aircraft once it was researched by providing some of the avionics needed
the result of this research was the Ye-110
yknow
this pops ups on my notifs
and the moment I see it dude
uncool.
do you understand how HARD it is to ACTUALLY make a livery with good color combination? man not my oshi bruh
@Solo23456789
the reason I made the engine that weak because that engine was rated as accurately as possible
but SP being SP I can't really make the engines perform as accurate as a real life engine without me using more fuel, so I just decided to do that
for the most part I'm just dissapointed
but tbf I really should redo all of my older frames because they all suck
how to solve a problem:
+3step 1:
identify the problem
step 2:
study the problem
step 3:
try a method you know
step 4:
if it doesn't work, do either:
- look into people's builds and see how they do it
- ask
step 5:
profit
what in the 1980000 symbols shit is this
+5fuselage cutting and small rotator with no base mesh is your best friend.
ggs everyone
+1@HoshimachiSuiseiMyBeloved
real
depends.
+5don't ask other people, ask yourself. do you still want to do this? if yes then don't (and also that's stupid because you're just looking for clout), if no, then do whatever the fuck you want, nobody's stopping like real bruh
or you can just yknow
set the input to disabled and put the activation group on any number
tempted to make mio in amogus
burner looks a bit uncanny but
it's fine
is spot 2 taken?
if not, I'll take that thank you
now I gotta prepare some stuff
may or may not participate
dunno
yknow,
wish I could try it out, but my phone would explode.
even with the lowest, 960 parts, I wouldn't be able to fly as comfortably due to the immense lag caused by this masterpiece.
truly a shame.
I see PAT
+1I updood.
tanoshikatta, arigatou.
that said, I didn't really do much lol
@RishantYT747fan
+1nanah, I'm not asking tou to take it down
just
good effort, but not enough
I appreciate your effort but
+1kind of half-assed ngl
@AdmiralGelvain
hehe, sudah kuduga
a bit of "correction" to the changes list:
btw pake laser boleh gak?
kangr isi sicx yyer odl gsuys !!!!
+1suj impretean inpromtation!!!! !!1!!!
ok
aku juga mw ikut 😋😋😋
cool
+1also KOYORI PFP
I'm sorry I get kind of too excited when I see a fellow holofan lmfao
real
yeah Ik
wish her the best of luck from a fellow indonesian
chii had enough and decided to leave again I think Idk why though
+5:o
that kemomimi is a definite giveaway to it's stealth fr
whoever installed a microwave inside of my jet is a goddamn genius holy shit look at those utensils go, they're so fucking bright-
pog
+1@ReinMcDeer
epic
I may use it for something 👀
shut up
another person desperate for money it seems
razer would be proud
that is definitely an old technique
you rarely see those these days because of how much convenience is there
as for the help, sorry, no can do on the cockpit aspect
I can help on weapons though, as I'm also making a Typhoon rn
yooo epik
+1jarang liat YF-12, gw salut deh
should they stop? yes
+1will they stop? no. never. in a century.
ok
hoshiyomi lookin ass mf
yes, finally a good opponent to go against the vipor
+3@Hiimakeplanes
F-35.
technically
do you want your already multibillion dollar 5th gen fighter to become a multitrillion dollar 4th generation fighter?
omg epikc ntorop plan!!11!!!1!1
there's a property for the beacon and formation light, which is called
+1inputso the first step is grab a beacon light, go to the xml of the beacon light, go to the BeaconLights section, and in the
inputproperty, change the value from None to VTOL>0.49you're welcome
little lore I made up just because I'm bored:
the XV-2A was originally developed as a prototype aircraft, it served as a testbed for a VTOL technology AAI have been taking interest in lately
however, the prototype crashed, due to hydraulical failure during it's 3rd flight, causing the RCS nozzles and all control surfaces to stop functioning, pilot ejected
after the crash, AAI thought of making a second one (which explains why there is still another prototype of it), but they stopped midway because they realized it was too expensive to make and considering the finances of the company, they might not be able to recover once they commited onto it
after the alliance invasion of Yeager, AAI realized they might be able to continue the program, but the concern for an invasion against Staneland provoked one of the higher ups to transport the XV-2A to Yeager and hid it inside the hangar, safe against surveilance cameras, along with the mockup
after the annexation of Staneland, AAI was forced to join the side of the UFSR in order to survive, and gave plans for new aircrafts to the higher ups
the higher ups took interest in the XV-2A and asked AAI to make it again, however AAI refused due to the company's financial issue (which is barely holding on), and instead told them about the existing XV-2A mockup and second unfinished prototype stored at Yeager
the blueprints at this point was already handed to the higher ups, but the instructions were unclear to them, and as such they needed the mockup and the 2nd airframe to continue researching it
Yeager was retaken, and the XV-2A had been retrieved by Fortis
the next problem however, is who is going to research this thing?
Yekavlov was ready to answer that question and took full responsibility for the research and production of a new VTOL fighter
as a means to reduce cost, AAI helped Yekavlov in producing the aircraft once it was researched by providing some of the avionics needed
the result of this research was the Ye-110
quick question
does an AEW&C/AWACS count as a strong vehicle? because I feel like it is
@RepublicOfCursedPlanes @Hiimakeplanes
+1the XV-2A was destroyed in an accident
however blueprints remained intact, which explains why this exists
@AirCombatant98
technically yes
but also no
babe wake up
+2otana just uploaded
kickin' ass as always, nice one!
yknow
this pops ups on my notifs
and the moment I see it
dude
uncool.
do you understand how HARD it is to ACTUALLY make a livery with good color combination?
man not my oshi bruh
@Solo23456789
the reason I made the engine that weak because that engine was rated as accurately as possible
but SP being SP I can't really make the engines perform as accurate as a real life engine without me using more fuel, so I just decided to do that
for the most part I'm just dissapointed
but tbf I really should redo all of my older frames because they all suck