@Stanmich don't allow the fuselage to touch (make a connection by itself) to any part of the landing gear other than the two places I indicated or the landing gear will not function. Sometimes I have to go into manual connections and make sure nothing is touching the landing gear shaft or any other parts
@CarrotSlicingCompanyCat what I mean is go to @guyfolk and check out his planes. In particular, X-02S Strike Wyvern ''Archange'' . This is where my HUD came from, his is better. Before you fly put the plane on a runway, use orbit view to go underneath the plane then press activate 5. This will bring out his rail gun, it's a sight to see. ;). Z
@PriyanshuGM Just an fyi the radar was originally created by @Guyfolk . Take a peek at his "X-02S Strike Wyvern ''Archange''. Especially the HUD. Once the plane is on the runway, use orbit view to go underneath then press activate 5. You will see the rail gun come out. His rounds are designed to explode at the distance the target is away from him. I consider @guyfolk an absolute pioneer in this game. :). Z
@GuyFolk I understand.....btw I don't know if I mentioned to you but the railgun you have on your aircraft, the way it comes down from the fuselage and spins, that is just so sick. I think some of these things might get past people. I used orbit view to sit underneath the aircraft and watch the railgun go in and out of the fuselage. It's like art.
@BeastHunter @Rjenteissussy Version 4 with fixed HUD and rudders are fixed so aircraft doesn't slide from side to side while flying. My bad on that, rookie mistake. Z
@Alvin8 @Titaninferna @DARZAVIATIONOFICIAL here's a new version with a corrected HUD and the rutters are fixed so the aircraft doesn't slide sideways in the air. Also, DARZAVIATIONOFICIAL,. I can post the same plane w less parts by removing ALL the lights (200) from the engines if this plane is unflyable for you. Just let me know !
@Stanmich @INDOMIEGORENG28 @EasternPatrick New version with fixed HUD and rudders are correct so the plane doesn't slide around in the air. (Rookie mistake on my part}
@GuyFolk I saw his original post about the smoke and downloaded it and tried it. Good stuff. Yeet Detector Version 4 is posted with your fixes. I can't believe I left my rudders on roll rather than yaw what a rookie mistake. It flies so much better now without it sliding around in the air. Maybe a spotlight from the great and powerful guyfolk would kick things off for the new version ? Lol. Z. ;)
The Best engines in the game. Thrust Vectoring engines by "@skyjaythefirst" Each engine has over 100 becon lights scaled to give the engine its inside texture and alows the engine to change color 4 times while thrust is increasing. Until full thrust, the engines give off a bluish glow.
HUD Best HUD in the game by "@guyfolk" This HUD is as close to a fighter jet as they come. It has a "Red Locking Diamond" that surrounds target. His HUD on the X-02S Strike Wyvern ''Archange'' is even better w more features. The railgun is incredible !
Animated Sweeping radar by @guyfolk @zaineman
Best Missiles in the game. ICG Interceptors otherwise known as @IceCraftGaming Interceptors. They have the ability to lock on to a target and continue to chase that target until destroyed. Camera angle is left on so you can watch them chase the target. It's a sight to see.
1) Graphic representation of engine thrust from 0% to Afterburners. 2) True fuel status in liters with time remaining based on level of thrust. 3) Graphic representation of aircraft chassis and air to air missiles mounted beneath. ALL @guyfolk
Variable geometry wings by @Winswings
Low yield Nuclear cleavers by Zaineman
Yeet Detector cannon with range finding exploding rounds by @guyfolk and a small part by me Zaineman
@Alvin8 Thanks Alvin ! The Yeet Cannon is fun air to air. Also, watching an @icecraftgaming interceptor chase a plane is hilarious. If the missile misses, I don't shoot another until it hits its target..... Be patient.. lol. Z
The Best engines in the game. Thrust Vectoring engines by "@skyjaythefirst" Each engine has over 100 becon lights scaled to give the engine its inside texture and alows the engine to change color 4 times while thrust is increasing. Until full thrust, the engines give off a bluish glow.
HUD Best HUD in the game by "@guyfolk" This HUD is as close to a fighter jet as they come. It has a "Red Locking Diamond" that surrounds target. His HUD on the X-02S Strike Wyvern ''Archange'' is even better w more features. The railgun is incredible !
Animated Sweeping radar by @guyfolk @zaineman
Best Missiles in the game. ICG Interceptors otherwise known as @IceCraftGaming Interceptors. They have the ability to lock on to a target and continue to chase that target until destroyed. Camera angle is left on so you can watch them chase the target. It's a sight to see.
1) Graphic representation of engine thrust from 0% to Afterburners. 2) True fuel status in liters with time remaining based on level of thrust. 3) Graphic representation of aircraft chassis and air to air missiles mounted beneath. ALL @guyfolk
Variable geometry wings by @Winswings
Low yield Nuclear cleavers by Zaineman
Yeet Detector cannon with range finding exploding rounds by @guyfolk and a small part by me Zaineman
@winswings Win, this plane is a work of art. Seriously Win, it's really nice. I need to build planes like this. The only thing I would recommend is under canopy in settings is to change "Interior glass" to "Invisible" There are 2 sections to change. it makes flight much more enjoyable when you can see all the colors and there's no glare. Just a personal preference but I bet a lot of people might agree. Right now I am refitting a thrust vectoring jet with the best HUD in the game,best engines, missiles, etc...I had to spend a lot of time tracking down the usernames of all the people who made it possible. I've written a huge dedication I will put in the first comment that has every part and every person who made it possible. Your name is in there too ! Lol. Z
@guyfolk. SUCESS ! ! ! Thanks to your advice,I was able to get your HUD to line up correctly. I copied where your HUD & camera are in 3 dimensions then pasted into my HUD & camera respectively. Next, I made a connection between the HUD and the camera. Next,I removed the computer from my fuselage and moved my aircraft as close as I could to the HUD and camera. Finally, I used multi-edit to make small adjustments to where the camera and HUD is in respect to my fuselage. (Once the X,Y,Z on the HUD and camera matched yours and I connected them to one another, it was gravy) My only wish is, I wish the HUD was 2X the sixeitis now...... Thanks Guyfolk, you're the man l
I changed the cannon to air / ground, change tracer color to purple to see it, changed firing rate to .1 , Tracers to ALL, tracer length to 1, and I was hitting planes from over a mile away. This is a really really neat build. It would go fantastic on a tank or in a big gunship like a B-52
@GuyFolk it sure does, I shortened the length of the propeller blades, and I meant to add it in the description not to pull up super fast but I forgot. But I still think it has, what 11 propellers left ? Lol lol
@BRAZUCA Brazuca, I feel terrible. 5 months ago when I was first building planes,you made a plane called GIGANT. I modified it greatly but it was still your original airframe and I created https://www.simpleplanes.com/a/2HeHyi/Zaine-MultiProp Zaine's MultiProp. NO upvotes, 3 downloads. :( So, a few days ago I found "Zaine's MultiProp" in my saved folder and I thought I created it. I'm sorry friend ! I completely forgot that the original airframe was yours..... I edited the original description to give you credit
@GuyFolk I saw it too. Almost that entire cockpit is made out of a layer of huge buttons & it has multiple layers of garbage and failed attempts at instruments. I really didn't want to go digging because if I did I wouldn't stop.
@GuyFolk The Camera ! ! ! Of course ! "Big Red truck" I never would have thought of that and it's so obvious. I'm not lining up the plane with the HUD in order to get the diamond perfect, I'm lining up the camera with the HUD. I'll be darn. I have a pretty busy day today and I work early tomorrow but this gets me something to look at and work on. I hope you don't mind me telling other people about your pods and your other designs. In my opinion you aren't getting the credit you deserve case in point. X-02S Strike Wyvern ''Archange''.... well okay ....you did get a lot of recognition for this one but you understand what I'm trying to say....... People love your pods....
@guyfolk First sorry to bug you with this but.......I started to read the programming link you sent me and it was clear that it was Way over my head. So, I copied and pasted EVERY ONE of your variables into an email (just for safekeeping) Next, I copied all of it into my other builds along with your HUD. First, hurray the horizontal degree lines actually appear and work.
But here is the million dollar question. The small "Target locking Diamond" does not line up. So, I know the X axis is 0.00 that's easy to move the aircraft there. But the next Y axis and the Z axis how do I get your hud to line up ? Short of building an entire aircraft around IT.
I noticed the first line in your variable said HUD distance. But it didn't seem to correspond with any number.
So without me getting an engineering or programming degree, how do I get your HUD to line up correctly on one of my aircrafts ? That locking diamond you have is the coolest and I would like to make it work.
I know this is a rotten thing for me to ask you this. I'm hoping the answer won't be too complex.
@Dathcha oops I almost forgot to tell you. When I use afterburners on my aircraft, the color black is always in there somewhere. Sometimes I'll mix four colors using four VTOL nozzles but this time the black is in a very back of the aircraft. Sometimes you might not spot it unless it's pointed out, but just based on talking to you, I think you'll get a kick out of it..... Z. :)
@Winswings @CarrotSlicingCompanyCat @brazuca Guys, peep my new plane. Lol at least once before you take off and while you take off, use orbit view then press air to air. Also, check the burners, I always use the color black somewhere in my burners, this time it's at the very rear of the aircraft. Sometimes it's hard to spot unless you're looking for it.
@Dathcha Did you look at the aircraft in orbit view then press air to air ? That is a sight to see my friend. Also, thank you so much for your upvote !
@MDDJB thank you for the upvote. For the life of me I can't get that stupid HUD in front of the pilot to fold up and away like I have for the co-pilot. I messed with it for an hour and finally gave up. Lol. Z :)
@winswings @CarrotSlicingCompanyCat @BRAZUCA I don't know how Win's helicopters look so perfect with these parts. My cobra, I have so many different parts overlapping each other and it's just a hodgepodge (mess) just to get it to look like a helicopter. I actually had a couple photographs off Google that I was referencing. I guess my point is Win's entire fuselage looks like one piece. Problem is he's a 10-hour drive away from me if I want to see how he does it in person. Lol lol
@Stanmich don't allow the fuselage to touch (make a connection by itself) to any part of the landing gear other than the two places I indicated or the landing gear will not function. Sometimes I have to go into manual connections and make sure nothing is touching the landing gear shaft or any other parts
@CarrotSlicingCompanyCat what I mean is go to @guyfolk and check out his planes. In particular, X-02S Strike Wyvern ''Archange'' . This is where my HUD came from, his is better. Before you fly put the plane on a runway, use orbit view to go underneath the plane then press activate 5. This will bring out his rail gun, it's a sight to see. ;). Z
@CarrotSlicingCompanyCat thank you so so much. I can always count on you ! Dumb question but you've seen @guyfolk 's work right ?
@PriyanshuGM Just an fyi the radar was originally created by @Guyfolk . Take a peek at his "X-02S Strike Wyvern ''Archange''. Especially the HUD. Once the plane is on the runway, use orbit view to go underneath then press activate 5. You will see the rail gun come out. His rounds are designed to explode at the distance the target is away from him. I consider @guyfolk an absolute pioneer in this game. :). Z
+1The ECM pod is really slick...... Z
+1@GuyFolk I understand.....btw I don't know if I mentioned to you but the railgun you have on your aircraft, the way it comes down from the fuselage and spins, that is just so sick. I think some of these things might get past people. I used orbit view to sit underneath the aircraft and watch the railgun go in and out of the fuselage. It's like art.
@BeastHunter @Rjenteissussy Version 4 with fixed HUD and rudders are fixed so aircraft doesn't slide from side to side while flying. My bad on that, rookie mistake. Z
+2@Alvin8 @Titaninferna @DARZAVIATIONOFICIAL here's a new version with a corrected HUD and the rutters are fixed so the aircraft doesn't slide sideways in the air. Also, DARZAVIATIONOFICIAL,. I can post the same plane w less parts by removing ALL the lights (200) from the engines if this plane is unflyable for you. Just let me know !
+1@Stanmich @INDOMIEGORENG28 @EasternPatrick New version with fixed HUD and rudders are correct so the plane doesn't slide around in the air. (Rookie mistake on my part}
+2@BlackjackEagle thank you for your upvote ! Wow ,that was fast! I really appreciate it Blackjack ! @winswings @brazuca
@GuyFolk I saw his original post about the smoke and downloaded it and tried it. Good stuff. Yeet Detector Version 4 is posted with your fixes. I can't believe I left my rudders on roll rather than yaw what a rookie mistake. It flies so much better now without it sliding around in the air. Maybe a spotlight from the great and powerful guyfolk would kick things off for the new version ? Lol. Z. ;)
The Best engines in the game. Thrust Vectoring engines by "@skyjaythefirst" Each engine has over 100 becon lights scaled to give the engine its inside texture and alows the engine to change color 4 times while thrust is increasing. Until full thrust, the engines give off a bluish glow.
HUD Best HUD in the game by "@guyfolk" This HUD is as close to a fighter jet as they come. It has a "Red Locking Diamond" that surrounds target. His HUD on the X-02S Strike Wyvern ''Archange'' is even better w more features. The railgun is incredible !
Animated Sweeping radar by @guyfolk @zaineman
Best Missiles in the game. ICG Interceptors otherwise known as @IceCraftGaming Interceptors. They have the ability to lock on to a target and continue to chase that target until destroyed. Camera angle is left on so you can watch them chase the target. It's a sight to see.
1) Graphic representation of engine thrust from 0% to Afterburners. 2) True fuel status in liters with time remaining based on level of thrust. 3) Graphic representation of aircraft chassis and air to air missiles mounted beneath. ALL @guyfolk
Variable geometry wings by @Winswings
Low yield Nuclear cleavers by Zaineman
Yeet Detector cannon with range finding exploding rounds by @guyfolk and a small part by me Zaineman
Nice plane but couldn't fly on tablet because of 6000 parts. :(. Z
+1@Alvin8 Thanks Alvin ! The Yeet Cannon is fun air to air. Also, watching an @icecraftgaming interceptor chase a plane is hilarious. If the missile misses, I don't shoot another until it hits its target..... Be patient.. lol. Z
+1@BRAZUCA thanks for letting me off the hook but I should have given you credit.... Lol. :)
@BRAZUCA I put credit for you in the description of the aircraft. :)
@BRAZUCA Did you read my apology message to you regarding the Blunderbuss plane ?
@brazuca thanks for the upvote. Have you tried the aircraft ?
@WinsWings lol check it out tonight Win !
+1I love what you have done with the propellers. !
When I heard that tire screeching , I knew I was making smoke by shooting that gun. I actually chuckled out loud.....
@IzzyIA @Nedludd thank you very much for the upvotes. It's much appreciated !!
I like this plane. Bla bla bla..... Don't forget to push all the activate buttons once you're at altitude
Some advice, don't shoot aircraft with a cannon at point blank range, you'll die too. Always fly with thrust vectoring on.
The Best engines in the game. Thrust Vectoring engines by "@skyjaythefirst" Each engine has over 100 becon lights scaled to give the engine its inside texture and alows the engine to change color 4 times while thrust is increasing. Until full thrust, the engines give off a bluish glow.
HUD Best HUD in the game by "@guyfolk" This HUD is as close to a fighter jet as they come. It has a "Red Locking Diamond" that surrounds target. His HUD on the X-02S Strike Wyvern ''Archange'' is even better w more features. The railgun is incredible !
Animated Sweeping radar by @guyfolk @zaineman
Best Missiles in the game. ICG Interceptors otherwise known as @IceCraftGaming Interceptors. They have the ability to lock on to a target and continue to chase that target until destroyed. Camera angle is left on so you can watch them chase the target. It's a sight to see.
1) Graphic representation of engine thrust from 0% to Afterburners. 2) True fuel status in liters with time remaining based on level of thrust. 3) Graphic representation of aircraft chassis and air to air missiles mounted beneath. ALL @guyfolk
Variable geometry wings by @Winswings
Low yield Nuclear cleavers by Zaineman
Yeet Detector cannon with range finding exploding rounds by @guyfolk and a small part by me Zaineman
+1@winswings Win, this plane is a work of art. Seriously Win, it's really nice. I need to build planes like this. The only thing I would recommend is under canopy in settings is to change "Interior glass" to "Invisible" There are 2 sections to change. it makes flight much more enjoyable when you can see all the colors and there's no glare. Just a personal preference but I bet a lot of people might agree. Right now I am refitting a thrust vectoring jet with the best HUD in the game,best engines, missiles, etc...I had to spend a lot of time tracking down the usernames of all the people who made it possible. I've written a huge dedication I will put in the first comment that has every part and every person who made it possible. Your name is in there too ! Lol. Z
+1@Shimamurahougetsu Thank you for the upvote ! I really appreciate it ! ;). Z
+1@guyfolk. SUCESS ! ! ! Thanks to your advice,I was able to get your HUD to line up correctly. I copied where your HUD & camera are in 3 dimensions then pasted into my HUD & camera respectively. Next, I made a connection between the HUD and the camera. Next,I removed the computer from my fuselage and moved my aircraft as close as I could to the HUD and camera. Finally, I used multi-edit to make small adjustments to where the camera and HUD is in respect to my fuselage. (Once the X,Y,Z on the HUD and camera matched yours and I connected them to one another, it was gravy) My only wish is, I wish the HUD was 2X the sixeitis now...... Thanks Guyfolk, you're the man l
I changed the cannon to air / ground, change tracer color to purple to see it, changed firing rate to .1 , Tracers to ALL, tracer length to 1, and I was hitting planes from over a mile away. This is a really really neat build. It would go fantastic on a tank or in a big gunship like a B-52
+3@GuyFolk it sure does, I shortened the length of the propeller blades, and I meant to add it in the description not to pull up super fast but I forgot. But I still think it has, what 11 propellers left ? Lol lol
+1@MDDJB thank you very much for your upvote, I hope you took the time to see the missile pods in action from the orbit camera view.
@BRAZUCA Brazuca, I feel terrible. 5 months ago when I was first building planes,you made a plane called GIGANT. I modified it greatly but it was still your original airframe and I created https://www.simpleplanes.com/a/2HeHyi/Zaine-MultiProp Zaine's MultiProp. NO upvotes, 3 downloads. :( So, a few days ago I found "Zaine's MultiProp" in my saved folder and I thought I created it. I'm sorry friend ! I completely forgot that the original airframe was yours..... I edited the original description to give you credit
@GuyFolk I saw it too. Almost that entire cockpit is made out of a layer of huge buttons & it has multiple layers of garbage and failed attempts at instruments. I really didn't want to go digging because if I did I wouldn't stop.
@GuyFolk The Camera ! ! ! Of course ! "Big Red truck" I never would have thought of that and it's so obvious. I'm not lining up the plane with the HUD in order to get the diamond perfect, I'm lining up the camera with the HUD. I'll be darn. I have a pretty busy day today and I work early tomorrow but this gets me something to look at and work on. I hope you don't mind me telling other people about your pods and your other designs. In my opinion you aren't getting the credit you deserve case in point. X-02S Strike Wyvern ''Archange''.... well okay ....you did get a lot of recognition for this one but you understand what I'm trying to say....... People love your pods....
@guyfolk First sorry to bug you with this but.......I started to read the programming link you sent me and it was clear that it was Way over my head. So, I copied and pasted EVERY ONE of your variables into an email (just for safekeeping) Next, I copied all of it into my other builds along with your HUD. First, hurray the horizontal degree lines actually appear and work.
But here is the million dollar question. The small "Target locking Diamond" does not line up. So, I know the X axis is 0.00 that's easy to move the aircraft there. But the next Y axis and the Z axis how do I get your hud to line up ? Short of building an entire aircraft around IT.
I noticed the first line in your variable said HUD distance. But it didn't seem to correspond with any number.
So without me getting an engineering or programming degree, how do I get your HUD to line up correctly on one of my aircrafts ? That locking diamond you have is the coolest and I would like to make it work.
I know this is a rotten thing for me to ask you this. I'm hoping the answer won't be too complex.
Love it !
+1@WinsWings Tuna fries !? For Shame , it's Ahi Tuna with wasabi ! It's a delicacy my fine sir !lol
+1@CarrotSlicingCompanyCat Thank you my friend for the spotlight. I worked really hard on this plane and it's much appreciated. Z. ;)
@Dathcha oops I almost forgot to tell you. When I use afterburners on my aircraft, the color black is always in there somewhere. Sometimes I'll mix four colors using four VTOL nozzles but this time the black is in a very back of the aircraft. Sometimes you might not spot it unless it's pointed out, but just based on talking to you, I think you'll get a kick out of it..... Z. :)
@Dathcha HA ! ! ! I know right ?!?!? Lol lol
@Winswings @CarrotSlicingCompanyCat @brazuca Guys, peep my new plane. Lol at least once before you take off and while you take off, use orbit view then press air to air. Also, check the burners, I always use the color black somewhere in my burners, this time it's at the very rear of the aircraft. Sometimes it's hard to spot unless you're looking for it.
@guyfolk @icecraftgaming hey guys, I thought you should be made aware I mentioned both of you and my description of this aircraft. Z. :)
@Dathcha Did you look at the aircraft in orbit view then press air to air ? That is a sight to see my friend. Also, thank you so much for your upvote !
@MDDJB thank you for the upvote. For the life of me I can't get that stupid HUD in front of the pilot to fold up and away like I have for the co-pilot. I messed with it for an hour and finally gave up. Lol. Z :)
@Bryan5 @Dragorans @Titaninferna I wanted to say thank you for the upvotes on my Cobra. Very kind of you to take the time ! Z. :)
+1@GrizzlitnCFSP @CRATE52PART2 @Thecoltster1 Thank you guys so Very Very much for the upvotes. It really means a lot to me. Z
@CarrotSlicingCompanyCat thanks my friend that's really nice of you to say. :)
@winswings @CarrotSlicingCompanyCat @BRAZUCA I don't know how Win's helicopters look so perfect with these parts. My cobra, I have so many different parts overlapping each other and it's just a hodgepodge (mess) just to get it to look like a helicopter. I actually had a couple photographs off Google that I was referencing. I guess my point is Win's entire fuselage looks like one piece. Problem is he's a 10-hour drive away from me if I want to see how he does it in person. Lol lol
+2@WinsWings Told you , @Otana ,. Otana's work is freaking amazing Win.....
+1@Otana Yes, absolutely my friend !
+1