Yes we play as a team, although recently he has not done much. Walrus Jr. is 12. He made the INJ Fuso as an example, while I made this plane. We both built the first flying toaster together, hot dog car, Tuk Tuk car, and others. We have fun together. @Himynameiswalrus
Thanks pretty good. You know when My son an I started playing this game, we were thrilled when 100 downloads occurred. Back then (a year ago), that was a good number. @Himynameiswalrus
@Flash0of0green - It takes time. Have a look at my earlier work, back when the parts were more basic. There were fewer players then and I was happy to get 5 upvotes and twenty downloads.
I'd keep tweaking the design so it pitches and rolls better at low speeds. I keep tweaking my old designs. About half the stuff I make does not make it on SP.
@Notapier - Not sure to be honest. The TU-95 had a similar problem on the lowest settings due to the heavily modded engines. I build my planes on a ASUS ROG G752VY gaming laptop, so I never have issues normally. I'll add a note at the top to run in medium settings.
@Flash0of0green - I try to respond to everyone. I usually work 12 - 14 hour days, so my responses can be short since I'm usually at work and on a tiny phone.
@Johawks1976 @planes223 @Delphirier @Overland @deusalgor @GINGER01 @JAMBO @planes223 @MrSilverWolf - honestly, thank you guys. It actually had much more detail in on version, but it flew bad so I had to tone it down here. I'm working on a super large WW II Corsair at this time, but a B-36 is on the drawing board.
@Preston1234 Hey Preston1234 Walrus Jr. here, Sr. Has been talking lately, so I thought I might say something as well. About the COM, COL, and COT, they should be aligned in a specific order to prevent your problem. Quite simply, red dot in front of blue dot you can achieve this by moving fuel, dead weight, ect. Don't worry about the COT. That is only important for making a VTOL, but that is another story. Hope this helps, if not we will see what we can do. Cheers!
I thought I did, but it might have been under a different post. Apologies for the mixup none the less. 😕 Thank you for choosing this plane! @AeroMobil
Great work Cedy! Will defenetly be flying this beautiful bird around a lot! @DeezDucks sorry for the inconvenience. I(Walrus Jr.) have been busy with homework, while Sr. has been caught up on work recently. We are trying our best to put things out, and I have lost a lot of motivation to build things. I love flying your creations around and it has inspired me. What should I build? Thanks!
By the way, I always chuckle a bit when I read your username. :-) @Himynameiswalrus
Yes we play as a team, although recently he has not done much. Walrus Jr. is 12. He made the INJ Fuso as an example, while I made this plane. We both built the first flying toaster together, hot dog car, Tuk Tuk car, and others. We have fun together. @Himynameiswalrus
Thanks pretty good. You know when My son an I started playing this game, we were thrilled when 100 downloads occurred. Back then (a year ago), that was a good number. @Himynameiswalrus
Thanks @Himynameiswalrus I appreciate that. Also, I just realized this has 17,000 downloads. Oh my!
Nice ship!
@Flash0of0green - It takes time. Have a look at my earlier work, back when the parts were more basic. There were fewer players then and I was happy to get 5 upvotes and twenty downloads.
What are you taking in school? @Flash0of0green
I'd keep tweaking the design so it pitches and rolls better at low speeds. I keep tweaking my old designs. About half the stuff I make does not make it on SP.
@Notapier - Not sure to be honest. The TU-95 had a similar problem on the lowest settings due to the heavily modded engines. I build my planes on a ASUS ROG G752VY gaming laptop, so I never have issues normally. I'll add a note at the top to run in medium settings.
@Flash0of0green - I try to respond to everyone. I usually work 12 - 14 hour days, so my responses can be short since I'm usually at work and on a tiny phone.
Took it for a spin. Nice little fighter.
I was going to put FIFI on the side. Those are Fifi's markings on the tail. @Notapier
@Flash0of0green - I could, but I'm working on a Vought F4U Corsair right now. Thanks for the comment and vote of confidence.
@BroPlanes @MEGANOOB - Thanks very much, guys. I honestly appreciate the kind words. Hey @TheLatentImage , that's very punny.
@AndrewGarrison - Thanks Andrew. As you know, I'm a big fan of your work as well ;-)
@VikDesigns @Rohan @grizzlitn @FlOu @Static - thanks for the upvote and kind words guys. @THEaviator - I was thinking of a B wing actually.
Thanks @kikasshes . Yeah that rotator trick is useful.
It is a big one! I (Walrus Jr.) need to go to school now. I will test when is get back.
Sr. Here. I'll let Jr. Check it out tomorrow. @Preston1234
@Preston1234 - Yes :-)
Example before that did not fly well. I had to remove some detail to make it work.
@Cedy117 Thanks Cedy!
@Johawks1976 @planes223 @Delphirier @Overland @deusalgor @GINGER01 @JAMBO @planes223 @MrSilverWolf - honestly, thank you guys. It actually had much more detail in on version, but it flew bad so I had to tone it down here. I'm working on a super large WW II Corsair at this time, but a B-36 is on the drawing board.
@Preston1234 Hey Preston1234 Walrus Jr. here, Sr. Has been talking lately, so I thought I might say something as well. About the COM, COL, and COT, they should be aligned in a specific order to prevent your problem. Quite simply, red dot in front of blue dot you can achieve this by moving fuel, dead weight, ect. Don't worry about the COT. That is only important for making a VTOL, but that is another story. Hope this helps, if not we will see what we can do. Cheers!
Wonderful job! I like the udders, true detail. Lol Walrus Sr. is going to get a chuckle out of this!
I thought I did, but it might have been under a different post. Apologies for the mixup none the less. 😕 Thank you for choosing this plane! @AeroMobil
Thank you very much! @loltrol48
Yeah, that would be cool. @RedHawk
Thanks. I'm working on a Corsair right now, but it is really heavy, so the folding wings might not work. @loltrol48
Thanks, but no credit is really needed to me. @Imperium
Thanks @Zoe024 !
Yeah, this is a fun build. Jr. really liked these. @JacobHardy64
Thank you, sir. @loltrol48
That's nice of you to help. @Delphinus
Thank you for the delicious comment. @blueangelproduction
Thanks for pinging me. This is pretty sweet! Congrats on silver!
Glad to see you back in the game. @Lkirby
You put a ton of work into this one and it is a beautiful, outstanding aircraft. Fantastic job man.
I've been working 12 - 14 hour days for the last few weeks. I'm so tired these days that I have to say no for now. @Nickasaurus
@DeezDucks Both you guys, but I guess we will be fine in the meantime.
Yes and we have whistle dogs with bacon, too. @DeezDucks
Great work Cedy! Will defenetly be flying this beautiful bird around a lot! @DeezDucks sorry for the inconvenience. I(Walrus Jr.) have been busy with homework, while Sr. has been caught up on work recently. We are trying our best to put things out, and I have lost a lot of motivation to build things. I love flying your creations around and it has inspired me. What should I build? Thanks!
@DeezDucks - Those are on back order. How about a hot dog attack car (HDAC)?
I'll be back... @CyberDyneIndustries
Do you work for them? @Yottabyte1024 @Yottabyte1024
I'll purchase those for my aircraft company. @Hadesrocksz
Thanks. Looks pretty easy to fix / enhance. @DeezDucks
Just to say it again. We (Jr. and Sr.) both really liked your work on this boat.
You are very talented. Keep up the good work! Walrus Sr.
I rolled this down the top of the mountain and it did not lose a single piece. I think it is beautiful.