@brians1209 Its really only a thing on prop airplanes, but basically the spinning of the prop forces the air going backwards to spin, and when that air hits the rudder the plane goes way off in the wrong direction
I made a set of custom gear recently that was very similar to the default gear, but with the custom gear I could customize the functionality and add more detail, and it looked a lot better.
Fixed issue, turns out the controls were reacting to being put at an extreme dihederal after being thinned to fit the control surface mesh. I need to find a way around it now.
For background info: The control surfaces were making my aircraft move in strange ways due to inertia, and the elevators were the worst, making my plane literally jump off of the ground. The stock structural wings are at fault here, idk why they did what they did but it shouldnt be happening.
I set damper up to 100,000 with the only effect being the surfaces moved slower, but inertia remained almost the same (it did go down a little bit but at a huge loss of elevator movement speed).
@Pita I could help fix the engine power issues, I already have a funkytrees formula for it. @REW could I do that and then give it back to you to upload as an update?
@Delphinos lol
@Giantwhale Press ACT1
@switdog08 Wright Town
F
@Hedero YEAH
@Boeing777x Thank you my guy
@switdog08 yaa man
@Theboeingboi Epic
Its mad mobile friendly tho
@Black2014 Swearing is against site rules, just thought id let you know.
NO IM NOT GONNA CLICK IT NO IM NOT GONNA CLICK IT I CANT DO IT NOT AGAIN PLEASE NOOOOOOOOO rick roll intensifies
However, I dont think P-Factor is actually modelled in SP
@brians1209 Its really only a thing on prop airplanes, but basically the spinning of the prop forces the air going backwards to spin, and when that air hits the rudder the plane goes way off in the wrong direction
@Someterribleuser I dont think that would be the issue. Either there is crosswind, P-Factor, or the mass is to the side.
@Notaperson thanks
@CaptFoxworth19 I used the smooth function from funky trees
@AndrePlaysSP maths
@Mouki sounds good
@TurtlesThatFly haha I almost never upvote a build that I get randomly tagged on
@XAircraftManufacturer The new glass part might actually allow that
I made a set of custom gear recently that was very similar to the default gear, but with the custom gear I could customize the functionality and add more detail, and it looked a lot better.
@SupremeDorian Understandable
@switdog08 :(
@Mouki Is that as a student or private?
@MrSilverWolf I could try to smooth out the ones over the windows before release
@Numbers I got the landing lights after recording
@WolfSpark thx
@Pita I also drive a saab hmm
@Pita yay
Im 5 years old :)
@rexzion very
Its just an effortless brick that doesnt even fly.
I see SAAB
@SimpleSW Keep low key so the mods don't notice kek
Worst that happens here is the post gets removed and you can then just build your own trophy or something and reupload with same caption.
@Son You can do that through the custom blueprints thingy
Hi dad
Wing sweep is absolutely ridiculous but as far as I know that's pretty realistic to the irl airplane lol
@Numbers If I make a livery it would probably be Silver but idk how im gonna pull that off
@ollielebananiaCFSP I came here to see the plane
@switdog08 Why am I stupid
@headphones oops O_O
I heard at least 17 swears in that music, although again I could barely make out the lyrics so I could be wrong...
Fixed issue, turns out the controls were reacting to being put at an extreme dihederal after being thinned to fit the control surface mesh. I need to find a way around it now.
For background info: The control surfaces were making my aircraft move in strange ways due to inertia, and the elevators were the worst, making my plane literally jump off of the ground. The stock structural wings are at fault here, idk why they did what they did but it shouldnt be happening.
Make this a mod for every default airport (except Wright North runway) and I will be very grateful.
Looks like nose cone could be shortened slightly, and the cockpit shape needs modifications, but besides that looks great.
Also the pylons poking out the back of the main wings should have hard edges it looks like from the image.
I set damper up to 100,000 with the only effect being the surfaces moved slower, but inertia remained almost the same (it did go down a little bit but at a huge loss of elevator movement speed).
@Pita Ah yes, SP jet engines
@REW Not bad for what you got there
So like... 10,000 parts?
@Pita I could help fix the engine power issues, I already have a funkytrees formula for it. @REW could I do that and then give it back to you to upload as an update?