@Flyboy360 Unfortunately I don't really have much time right now. As you may see, this post is a year old. Since you're on android, perhaps you could use Fine Tuner?
@EagleFlyer see if you can manually copy the file into your mods folder. (If you have the more recent versions of android which I suspect as it's new, you can go into settings>storage, select the storage you use (if you have an SD card it might be that, otherwise internal storage) then hit "Explore" at the bottom. You can then go into downloads and find the mod, press and hold, then there should be a "Copy To" button (maybe in the menu somewhere). Then go to your sd card/internal storage and Android/data/com.jundroo.Simpleplanes/files/Mods and copy it to here.)
There isn't really any configuration files. You have to go quite deep down the rabbit hole to do that... First of all, you need to figure out how to override the original physics. Then you have to make some more physics yourself. And they have to be better than the original physics.
@JosephB2001 does the prefab have a rigidbody in it? Also, is it attached to the plabe and does it have a collider? I would make sure it works in the editor before putting it in sp.
@JosephB2001 I think it would be better to put it inside a part object. Just put the camera rig on the part and it should work.. you'll need to disable the main camera with service provider or just do Camera.main.enabled = false;
uh, you can start by using the ServiceProvider.Instance.GameCamera.SetMainCameraEnabled(false) to disable the normal camera, create your own, using the position of ServiceProvider.Instance.GameCamera.CameraPosition
@4404 that's why helicopters have tail rotors. Getting the tail rotor to be perfectly calibrated would be hard though. Another easier method is to have two rotors going in opposite directions which therefore cancel each other out. They are called coaxial rotors. They can be mounted one on top of the other (you may need to nudge or use fine tuner) or one behind the other (like a Chinook).
@Lahoski107 no, you have to make mods in Unity, then upload them via the Create Mod button. If you want to learn more, go to Learn about Modding. (creating mods is at the bottom)
You should go for more wing loading, which is the amount of weight compared to the size of your wings. So either decrease the weight or increase the wing area.
@Lahoski107 I've made a lot of mods, which is where the large amount of my points come from. I've been here over a year and there was a long time where I just built little things, getting 5 upvotes (1 upvote = 15 points) was a major event.
They pop up in the menu on Stuff > Torunaments.
When you want to enter one, make sure your entry complies with the rules for the tournament, then upload it (listed or unlisted) and then use the Enter Tournament button on the tournament post and select your aircraft. There are currently no tournaments on, but they appear to be roughly monthly and there hasn't been one for a while.
@TheOwlAce lots. Run for your life
@masterplaneyoutube yes, I am aware of this. I have disabled the android download link and am investigating.
@Flyboy360 Unfortunately I don't really have much time right now. As you may see, this post is a year old. Since you're on android, perhaps you could use Fine Tuner?
@grizzlitn yeah, it's not working on android. I'm trying to find a way around it.
@Squirrel what if infra-red always followed where the plane is pointing?
@DaKraken it's alright, I have a mobile device. It's just on mine, I'm getting slightly different results.
@DaKraken 1. Is it straight after launching the game, when you load the level or when you drop the bomb?
2. Yeah I just added it
@DaKraken can confirm it's not working on android, as note says. Not much you can do right now.
@SAC923 "let's find out"? Make sure you're far away from it. If you're right in the center when it goes off you'll get a fair bit of lag.
@PhilipTarpley :)
You're getting really good at this. I almost went to spotlight it but you passed me in points!
Problem is that I keep coming up with cool new ideas before I finish my previous mod
I have considered something like this for a while... I reckon I could do it.
@Testin123 what did you comment?
@MrDoolittle "no real beef" except I have screenshots of KDS calling us "cancerous" and "BS"
@MrDoolittle I'd have thought you'd come up with something more coherent
@helilover03 really? What's it called?
Alas, October.
Great to hear you're getting stuff done! I've just got a few more levels to get my score below 20s on.
@EagleFlyer see if you can manually copy the file into your mods folder. (If you have the more recent versions of android which I suspect as it's new, you can go into settings>storage, select the storage you use (if you have an SD card it might be that, otherwise internal storage) then hit "Explore" at the bottom. You can then go into downloads and find the mod, press and hold, then there should be a "Copy To" button (maybe in the menu somewhere). Then go to your sd card/internal storage and
Android/data/com.jundroo.Simpleplanes/files/Modsand copy it to here.)@BACconcordepilot find your aircraftdesigns folder and delete
__editor__.xml.@Hotwheelsfam connect it to an engine.
There isn't really any configuration files. You have to go quite deep down the rabbit hole to do that... First of all, you need to figure out how to override the original physics. Then you have to make some more physics yourself. And they have to be better than the original physics.
@JosephB2001 does the prefab have a rigidbody in it? Also, is it attached to the plabe and does it have a collider? I would make sure it works in the editor before putting it in sp.
@JosephB2001 I think it would be better to put it inside a part object. Just put the camera rig on the part and it should work.. you'll need to disable the main camera with service provider or just do
Camera.main.enabled = false;@JosephB2001 huh..... have you tried it on multiple camera views? Maybe you could make a part which is your viewpoint?
uh, you can start by using the
ServiceProvider.Instance.GameCamera.SetMainCameraEnabled(false)to disable the normal camera, create your own, using the position ofServiceProvider.Instance.GameCamera.CameraPositionMake the wing twice as long and then scale it down to look like it was the original size. It will act as if it is twice the length but look normal.
@SimpleFlow hehe
@SimpleFlow no clue what you're on about.
@SimpleFlow what?
@Haydencal go to Yeager and fly North. It's quite a long way.
Bwuhahahaha
@MechWARRIOR57 you select joint rotator, press add, then put
damperMultiplierin the left box and your value in the right box.@Jasperjl the update has been out for weeks.
@sexylips35 I'm not quite sure what you mean but I have a lot of other mods on my list right now.
@Weaverfish that's not currently possible..
@johnarcie009123 is your game fully updated? There have been similar problems before and the cause was not updating the game.
@4404 that's why helicopters have tail rotors. Getting the tail rotor to be perfectly calibrated would be hard though. Another easier method is to have two rotors going in opposite directions which therefore cancel each other out. They are called coaxial rotors. They can be mounted one on top of the other (you may need to nudge or use fine tuner) or one behind the other (like a Chinook).
@sexylips35 yes?
There you go, a tournament has come up, and a rather interesting one at that.
@Lahoski107 download. The personal edition is free, and it's what I use. There's a guide with a few links to videos here.
@Lahoski107 you have to increase your wing size or decrease your mass.
@Lahoski107 no, you have to make mods in Unity, then upload them via the Create Mod button. If you want to learn more, go to Learn about Modding. (creating mods is at the bottom)
You should go for more wing loading, which is the amount of weight compared to the size of your wings. So either decrease the weight or increase the wing area.
@Lahoski107 I've made a lot of mods, which is where the large amount of my points come from. I've been here over a year and there was a long time where I just built little things, getting 5 upvotes (1 upvote = 15 points) was a major event.
@Lahoski107 well that must be outdated. There hasn't been one for 21 days.
@Lahoski107 where?
They pop up in the menu on Stuff > Torunaments.
When you want to enter one, make sure your entry complies with the rules for the tournament, then upload it (listed or unlisted) and then use the Enter Tournament button on the tournament post and select your aircraft. There are currently no tournaments on, but they appear to be roughly monthly and there hasn't been one for a while.
@ChaMikey you can't use mods if you got SP from the Mac app store