Try copying is into the description, the image should be visible after that.
I personally set my aircraft to Unlisted, give it a detailed description, and then publish it to the website using the publish button on the right-hand drop-down arrow on the website.
There is a Share Aircraft button at the top of the designer menu (above the show drag button, show balance button, and the other buttons). Clicking this will show an aircraft sharing menu. You will need to log in to your account in the game. Once this is done, you can give your aircraft a title (one will automatically be provided, but it can be changed), a description, and up to three screenshots (you must have at least one). You can also make your aircraft Public or Unlisted.
@PlenBoiPro To update the multiplayer mod, you need to remove the outdated file from the mod folder, which can be found here: C:\Users\(USERNAME)\AppData\LocalLow\Jundroo\SimplePlanes\Mods.
Just be sure to put your actual username instead of USERNAME.
@Dragoranos Obviously, for movement beyond default angle values, you would need something more complex.
However, I'm not sure I can provide any useful information in that area, since I'm not familiar with how the vehicle you are designing works.
@Dragoranos For up/down rotation, you might try some sort of -PitchAngle input (X axis). You could also try some sort of -Heading input for left/right rotation (Y axis).
If the movement is positional instead of rotational, then I don't have a solution at the moment.
This may or may not work, since I don't specialize in these types of vehicles/mechanisms.
Also, if I misunderstood, and you need Z axis inputs, you might try some sort of -RollAngle input.
@Dragoranos Ah I see. In that case, I believe Walvis has a tank stabilizer tutorial video. I know your post says that it's not just a tank, but it may still apply to whatever vehicle you are making.
Other than that, I don't really have any suggestions.
@PlaneFlightX
@HydroMoney22
I believe I overlooked a very important factor: stalling. The aircraft has a takeoff airspeed of about 175mph (about 282kph) IAS. I've been trying to land the aircraft at much lower speeds. The issue might be that the aircraft is just destabilizing due to a stall. Interestingly, the aircraft will stay in the air until it enters an uncontrolled pitch-up, most likely due to the CoM/CoL alignment. I'll do some more flight testing to see what needs to be done in order to land the aircraft properly, assuming that an aerodynamic stall is the issue.
@AerospaceGuy36 Ok. For flaperons in this scenario, I recommend using something like (VTOL×0.5+(Roll×0.25+(Pitch×0.25))). You can change the numbers to increase or decrease a certain input.
You might try finding the parts with the highest drag, and decreasing their drag value.
Though, this may become a realism issue, but that's the only solution I can think of at the moment.
@asteroidbook345 I tested the main sever a few times, even after restarting Simpleplanes, but it still didn't work. Other users are on the backup server, indicating that they are having the same issue.
Try copying is into the description, the image should be visible after that.
@Vegasonedew No problem!
I personally set my aircraft to
Unlisted, give it a detailed description, and then publish it to the website using the publish button on the right-hand drop-down arrow on the website.There is a
Share Aircraftbutton at the top of the designer menu (above the show drag button, show balance button, and the other buttons). Clicking this will show an aircraft sharing menu. You will need to log in to your account in the game. Once this is done, you can give your aircraft a title (one will automatically be provided, but it can be changed), a description, and up to three screenshots (you must have at least one). You can also make your aircraftPublicorUnlisted.When is the deadline?
Thoughts or suggestions? Let me know!
@G2 No problem!
@G2 Copy this:
.It's the spaces between the
!,[], and(image link).@G2 I'm also pretty sure that the text in the square brackets interferes with the functionality of the image link. You might want to remove that.
@G2 Use the direct link instead of the normal link.
Link to the aircraft.
@TheGliderGuy
Thoughts or suggestions? Let me know!
@PlenBoiPro To update the multiplayer mod, you need to remove the outdated file from the mod folder, which can be found here:
C:\Users\(USERNAME)\AppData\LocalLow\Jundroo\SimplePlanes\Mods.Just be sure to put your actual username instead of USERNAME.
@PacificWesternAirlines Ok.
@PacificWesternAirlines Nice.
Although, it isn't my server, I'm just making sure that people know that it's working again.
What's your MP username?
Link to the aircraft.
Link to the aircraft.
Link to the aircraft.
@BeastHunter
@X99STRIKER
Thoughts or suggestions? Let me know!
@Dragoranos Obviously, for movement beyond default angle values, you would need something more complex.
However, I'm not sure I can provide any useful information in that area, since I'm not familiar with how the vehicle you are designing works.
@Dragoranos For up/down rotation, you might try some sort of
-PitchAngleinput (X axis). You could also try some sort of-Headinginput for left/right rotation (Y axis).If the movement is positional instead of rotational, then I don't have a solution at the moment.
This may or may not work, since I don't specialize in these types of vehicles/mechanisms.
Also, if I misunderstood, and you need Z axis inputs, you might try some sort of
-RollAngleinput.@Dragoranos Hmm. Along what axis does the part you are referring to move? (X, Y, or Z axis.)
@Dragoranos Ah I see. In that case, I believe Walvis has a tank stabilizer tutorial video. I know your post says that it's not just a tank, but it may still apply to whatever vehicle you are making.
Other than that, I don't really have any suggestions.
Are you referring to artificial stability for an aircraft?
@PlaneFlightX
@HydroMoney22
I believe I overlooked a very important factor: stalling. The aircraft has a takeoff airspeed of about 175mph (about 282kph) IAS. I've been trying to land the aircraft at much lower speeds. The issue might be that the aircraft is just destabilizing due to a stall. Interestingly, the aircraft will stay in the air until it enters an uncontrolled pitch-up, most likely due to the CoM/CoL alignment. I'll do some more flight testing to see what needs to be done in order to land the aircraft properly, assuming that an aerodynamic stall is the issue.
@HydroMoney22 Thanks for the information!
@PlaneFlightX Thanks! I'll test it out to see what happens.
@AerospaceGuy36 Ok. For flaperons in this scenario, I recommend using something like (VTOL×0.5+(Roll×0.25+(Pitch×0.25))). You can change the numbers to increase or decrease a certain input.
@AerospaceGuy36 Do you want me to explain it or do you want me to implement it into the aircraft?
@AerospaceGuy36 I could probably do something like that, if the plane doesn't have a really high part count.
For FT, it depends on the airplane. What kind of FBW system do you need?
@Gaohahahahiaxd https://www.simpleplanes.com/Mods/View/648192/Nukes
@G2 No problem!
You might try finding the parts with the highest drag, and decreasing their drag value.
Though, this may become a realism issue, but that's the only solution I can think of at the moment.
Thoughts or suggestions? Let me know!
@asteroidbook345 I tested the main sever a few times, even after restarting Simpleplanes, but it still didn't work. Other users are on the backup server, indicating that they are having the same issue.
But obviously the users on the website would not see them unless you tag them or send them a link.
I believe you can upload up to 10 unlisted planes per day.
@BeastHunter
@Winterfield
@X99STRIKER
Thoughts or suggestions? Let me know!
Link to the build: https://www.simpleplanes.com/a/oczpjP/NOVA-ICBM-Launch-Truck-Mk-3-1KT-Nuke
@L3FTxR1GHT https://www.simpleplanes.com/a/oczpjP/NOVA-ICBM-Launch-Truck-Mk-3-1KT-Nuke
Link to the aircraft.
Thoughts or suggestions? Let me know!
@BeastHunter
@NochAviation No problem!
@X99STRIKER ?
@DeezDucks Oh ok. I see your point.