@Tomair004826 If you were to make it fly a bit more like a real one, I would use XML to make the whole think significantly less draggy, and give it a little bit of extra weight so it can hold its speed a bit better. I wouldn't worry about that too much tho, its a very fun plane to fly
Very interesting little plane! Don't often see this sort of planes with this tailless canard/trapezoid wing setup. Closest things I can think of to compare to are a sort of cross between a Gripen and an F-16 or an X-29 with unswept wings. I think this is very cool
Quite an interesting glider, every time I turned off the engine to glide, the aircraft loses literally all of its speed, making gliding in the traditional sense quite awkward lmao. However it simply does not stall so I had some great fun hovering around wright airport at 15kph
Neat little design! Lands fairly short as advertised. For better performance, I'd thicken up the wing roots and square out the wing tips. All in all a very neat modification!
@Pakdaaircraftindustries I think the AD-1 is more similar to a swing wing system? Either way its a very cool piece of kit, I think the asymmetry looks so sick. The SAW is such a cool concept as well, definately much more sensible and effective application of the idea than my hunk of junk lmao!
@Astro12 ah, my bad. I don’t think I remembered it properly. It might have been the lack of those retracting flaps that they used to keep the engine warm that threw me off. They make the plane look boxier when they’re deployed.
@Baldovino Probably, but I’m fairly certain there were at the very least plans for missions carrying rp3s considering that the tempest was a direct successor of the typhoon and rockets were generally favoured by pilots over bombs
A pretty good addition would be the option to change whether your vehicles are air or ground (I.e. you can make your cars show up when you open air to ground) it would make air to ground a bit more interesting than the fixed stock targets
@blindspot61 Sorry for replying late. You will need to have overload installed, so if you don’t already, it’s under the mods tab on the main menu, so activate that. Then, while highlighting the prop that you want to edit, click the overload button at the bottom of your screen (it’s a </> over a plane). Go to the drop down menu at the top of the pop up box and select ‘Prop engine advanced’. Now, what you want is to edit the power box. Change the power unit to whatever you need it to be. (Keep in mind that 2 power units is one horsepower). I recommend setting it to 6000. I hope this is useful, good luck.
Great build! I love micro builds but they tend not to fly well but you have fixed that. My advice is to swap the inputs between the elevators and the flaps. All in all you’ve done a great job.
@Tomair004826 If you were to make it fly a bit more like a real one, I would use XML to make the whole think significantly less draggy, and give it a little bit of extra weight so it can hold its speed a bit better. I wouldn't worry about that too much tho, its a very fun plane to fly
Very interesting little plane! Don't often see this sort of planes with this tailless canard/trapezoid wing setup. Closest things I can think of to compare to are a sort of cross between a Gripen and an F-16 or an X-29 with unswept wings. I think this is very cool
+1Quite an interesting glider, every time I turned off the engine to glide, the aircraft loses literally all of its speed, making gliding in the traditional sense quite awkward lmao. However it simply does not stall so I had some great fun hovering around wright airport at 15kph
I love this era of interceptors so much
+2Not sure why you'd put "F Andrew Garrison" on a label inside the fuselage. Is it a sort of very quiet protest?
+1Guns can slightly shoot your own canards off, and bombs are equally self destructive, but I like this
Neat little design! Lands fairly short as advertised. For better performance, I'd thicken up the wing roots and square out the wing tips. All in all a very neat modification!
+1Looks realy cool! Can't get it to go though lmao
+1@Pakdaaircraftindustries I think the AD-1 is more similar to a swing wing system? Either way its a very cool piece of kit, I think the asymmetry looks so sick. The SAW is such a cool concept as well, definately much more sensible and effective application of the idea than my hunk of junk lmao!
Haven't seen someone use the classic engine part in a long time! Love the design
Incredibly fun to fly, I think my pilot was reduced to a fine pink paste from the g forces but frankly its worth it
@CatdogAerospace You gotta be really bored. Some weapons grade daydreaming
This is really cool! The flight performance feels pretty realistic and the ASM is really fun
@CatdogAerospace Well, the best of luck to you, it's definately an interesting bird to fly
@CatdogAerospace Well if they do, I hope I'm not standing anywhere near it lol
Neat! I love the paint job
Looks really nice! I love the livery you put on it
Really nice! Suprisingly easy to land with that strange landing gear arrangement too!
Holy roll
Very pretty! The greenhouse is the best hind hands down
+2Suitably strange I love her
@Kerbango Isn't nature beautiful sometimes
+1Crikey man
I don't think the anti flash white matters so much if the nuclear explosion in question is caused by it
+2This is incredible! This was just the finishing touch my new aircraft needed! Looking at the funky trees behind this is terrifying.
You might want to give it a flight test before you upload it! Air Intakes are usually considered to be an essential part of any jet aircraft lol
This looks great!
@PlanariaLab - The HUD is incredible, really pulls the build together
I gotta say the paint scheme is f-ing gorgeous
All round cool replica, mobile friendly too! It’s really good!
+1@Astro12 ah, my bad. I don’t think I remembered it properly. It might have been the lack of those retracting flaps that they used to keep the engine warm that threw me off. They make the plane look boxier when they’re deployed.
Feels curvier than the irl la-9, maybe closer to the la-7. Still a great design, really captures the feel!
The word is drogue chute, the plane is great! I have enormous respect for people who can make good replicas
It’s beautiful
It says this plane requires the beta, but none of the parts are from it, so it should be alright
@Baldovino Probably, but I’m fairly certain there were at the very least plans for missions carrying rp3s considering that the tempest was a direct successor of the typhoon and rockets were generally favoured by pilots over bombs
I’m pretty sure the tempest did carry unguided rockets
@astroidbook345, this was supposed to be auto credited to your flugtag post
Lovely detail, handling is nicely chaotic. Only occasionally takes off which for large cars in SimplePlanes is quite something. A solid 8.5/10
+1My only complaint is that it is too good
I gotta say man, you got me there
A pretty good addition would be the option to change whether your vehicles are air or ground (I.e. you can make your cars show up when you open air to ground) it would make air to ground a bit more interesting than the fixed stock targets
+4Holy garrison above that was fast
+6@blindspot61 Sorry for replying late. You will need to have overload installed, so if you don’t already, it’s under the mods tab on the main menu, so activate that. Then, while highlighting the prop that you want to edit, click the overload button at the bottom of your screen (it’s a </> over a plane). Go to the drop down menu at the top of the pop up box and select ‘Prop engine advanced’. Now, what you want is to edit the power box. Change the power unit to whatever you need it to be. (Keep in mind that 2 power units is one horsepower). I recommend setting it to 6000. I hope this is useful, good luck.
I’m getting a minimum of 1:21 with my current design. time to turn to the dark arts
+11:24, oh boy, I got some work to do
+1I would have competed regardless of whether or both there was a prize, but now I’m extra competing
Great build! I love micro builds but they tend not to fly well but you have fixed that. My advice is to swap the inputs between the elevators and the flaps. All in all you’ve done a great job.
It’s ok! Your English is excellent, don’t worry about it @Baldovino
The sarcasm was implied by the irregular capitalisation @Baldovino
+1