@TimsonAviation yeah, there are quite a few mods that aren’t compatible with macOS:
- all of Annedzrue’s mods (except Washington, B.C.),
- GIS maps from the guy with the long string of numbers, specifically those over 2.2 years ago (Wuhu Island works fine though).
- Jundroo City.
- Also, keep in mind that none of mikoyanster’s mods work because he probably lost all of them.
It gets a little annoying that I can’t use this many mods, but at least MisterT and Kennneth’s mods still work on macOS.
@LunarEclipseSP cost-cutting, I guess. The interior had no seats, and the only porthole available was inside the bathroom.
The critical point of the submarine was that it used composite materials (because they're cheaper than titanium), which aren't able to expand or contract easily. So under 3000+ pounds of water pressure, the submarine's hull experienced high stresses, and eventually shattered.
@UssrLENIN only one specific guy knows how to get around the disabled mod support (that’s why all your Android mods come from him); no one else can make those.
In my opinion those users built the titan because it’s popular now. If they waited for 6 months they wouldn’t be compelled to build it at all, because by then no one would remember the incident.
Also, some people say that it’s offensive to make the Titan since people died in the disaster, but following that logic, so would be replicas of the Titanic that killed 1500+ people, and planes involved in air crashes that kill hundreds of people at once, and you don’t see people complaining about those. All these aren’t meant to insult the people who died through these disasters; it’s to keep the tragedies in our memories so that we don’t ever repeat them again.
Narrowbody; considering you already have a widebody in your lineup, the LM-111 should be a narrowbody in order to complement the LM-101.
Also, I recommend that you draw out your design before you start building it; it saves a lot of time and effort.
Me spending 15 minutes trying to comprehend the passage:
Also, from my analysis of this tail logo, the stripes can be made using fuselages, while the bird logo (with white border) can be made using text logos, with a little help from Photoshop, and then overlayed onto the fuselage stripes.
@FeiGe3 Okay, I've tested the aircraft, but the flaps don't fall off on my side, and preventBreaking on the pistons is already set to "True". Can you send a photo so I can figure out how to fix the issue? Thanks
@TheAirbusLover because of HTML, every button here has a URL; if you hover above a button with a mouse, you can see the URL.
The comment link links to one of the pinned comments here. You can click “Permalink” to do that I think.
For upvotes, you need to hover above the upvote button on your build while logged off (because your own crafts’ buttons don’t show when you’re logged in), and copy down the URL.
And yes, it means that I can upvote other players’ builds with links like these.
You know what, I’ll make a forum post on this soon
@NoblePlanes For me, I'm pretty sure some of my aircraft will never make it off the drawing board, but I build these planes because I really like drawing and designing aircraft, and for a long time I've wanted to see my concept drawings take to the skies. SimplePlanes is the perfect place for that.
@AverageFedExMD11 you can only tag 3 people per comment
You made the plane on your pfp lol
@jamesPLANESii wait actually
@TimsonAviation yeah, there are quite a few mods that aren’t compatible with macOS:
- all of Annedzrue’s mods (except Washington, B.C.),
- GIS maps from the guy with the long string of numbers, specifically those over 2.2 years ago (Wuhu Island works fine though).
- Jundroo City.
- Also, keep in mind that none of mikoyanster’s mods work because he probably lost all of them.
It gets a little annoying that I can’t use this many mods, but at least MisterT and Kennneth’s mods still work on macOS.
The main issue is that jetstreams are so overloaded that users don't want to check them anymore, besides, notifications are always looked at first
@TheAirbusLover
+1@FeiGe3 alright, I've updated the plane, do the flaps still fall off?
The helicopter cockpit actually looks alright being a truck cab
+3I was about to ask where the wings were 💀💀💀
+1So it's a riot police car equipped with fire hoses? lol
+1maybe the real turn signals were the friends we made along the way...
+1@V anything is possible if you dream of it...
+1Not bad for a first plane
+1@LunarEclipseSP cost-cutting, I guess. The interior had no seats, and the only porthole available was inside the bathroom.
+2The critical point of the submarine was that it used composite materials (because they're cheaper than titanium), which aren't able to expand or contract easily. So under 3000+ pounds of water pressure, the submarine's hull experienced high stresses, and eventually shattered.
@ColonelCanada the grass is on the other side
Oh hey this is actually quite detailed
Well at least this one doesn't look like it's going to implode...
+3T
+1Is this for the Tita-
Nvm, they got to it before me
@Yourlocalhuman use Military font to get accurate results
@UssrLENIN only one specific guy knows how to get around the disabled mod support (that’s why all your Android mods come from him); no one else can make those.
@DatRoadTrainGuy19 ( ͡° ͜ʖ ͡°)
@DatRoadTrainGuy19 trust me, it’s just pure coincidence…
+1@Yourlocalhuman use this site, it’s basically the web version of SPRASTER
In my opinion those users built the titan because it’s popular now. If they waited for 6 months they wouldn’t be compelled to build it at all, because by then no one would remember the incident.
Also, some people say that it’s offensive to make the Titan since people died in the disaster, but following that logic, so would be replicas of the Titanic that killed 1500+ people, and planes involved in air crashes that kill hundreds of people at once, and you don’t see people complaining about those. All these aren’t meant to insult the people who died through these disasters; it’s to keep the tragedies in our memories so that we don’t ever repeat them again.
+2Scale everything based on the seat part
+1@AverageFedExMD11 send me the unfinished aircraft and I’ll see what I can do
@FeiGe3 alright; I’ll fix it later (since I’m at school now)
Narrowbody; considering you already have a widebody in your lineup, the LM-111 should be a narrowbody in order to complement the LM-101.
+1Also, I recommend that you draw out your design before you start building it; it saves a lot of time and effort.
Me spending 15 minutes trying to comprehend the passage:
+1Also, from my analysis of this tail logo, the stripes can be made using fuselages, while the bird logo (with white border) can be made using text logos, with a little help from Photoshop, and then overlayed onto the fuselage stripes.
can't tell the difference
Also T
I wish my irl friends would actually get SimplePlanes lol (I have a friend who likes planes but doesn't want to spend money on SP)
@FeiGe3 Okay, I've tested the aircraft, but the flaps don't fall off on my side, and preventBreaking on the pistons is already set to "True". Can you send a photo so I can figure out how to fix the issue? Thanks
Congrats on platinum! @bilibiliQCWL
Why does it actually look good in the rendered shots
@TheAirbusLover because of HTML, every button here has a URL; if you hover above a button with a mouse, you can see the URL.
+1The comment link links to one of the pinned comments here. You can click “Permalink” to do that I think.
For upvotes, you need to hover above the upvote button on your build while logged off (because your own crafts’ buttons don’t show when you’re logged in), and copy down the URL.
And yes, it means that I can upvote other players’ builds with links like these.
You know what, I’ll make a forum post on this soon
@FeiGe3 oh I forgot to disable piston breaking; I’ll update the plane later
@WinsWings I submitted my entry 10 hours ago; is it still approved for this challenge?
+2@NoblePlanes For me, I'm pretty sure some of my aircraft will never make it off the drawing board, but I build these planes because I really like drawing and designing aircraft, and for a long time I've wanted to see my concept drawings take to the skies. SimplePlanes is the perfect place for that.
+1@MrCOPTY done
+1That's a lot of tags lol
+1Requested tags:
+1@MAPA
Host tag:
@WinsWings
@MrCOPTY I'll try
+1Requested tags:
+1@XAircraftManufacturer
@Gabriel747
@CR929thenewSPplayer
Requested tags:
+1@Dogedogebread13
@Talon7192
@Bryan5
@Neruneten21
+1@Brololxd
@AlivePan
@CoachPickles86
+1@AndrrewGarrison
@PinnacleAirlines3701
@LM0418
+1@FedexGuy
@4planes
@SheriffHackdogMCPE
+1@TheTomatoLover
@FeiGe3
@KaffuVonBismarck
+1@UnfairchildFH227
@CheeseINDUSTRIES