@123Acepilot I completely forgot! I was trying to think of a film to watch today but couldn’t find anything on Netflix. Thanks for reminding me! I will check it out now
Pretty nice! The plane is quite a bit too heavy and has way too much fuel to the point where it’s too underpowered. However, if you remove 80% of the fuel it will still have a very capable range and have enough power. The cockpit also seems rather small for such a large aircraft and a bit too close to the engine. Apart from that though, it’s very fun to fly and looks good!
You guys did magnificent work on this aircraft. Pretty much everything about it is perfect. The engine is of the highest quality and shape of the plane is great. What a wonderful build!
@masotan15 its just division. Use a calculator or google for it instead of doing it mentally. If you type 33,721/5,910 into google it will show you the answer. Otherwise you can put in 33,721 ÷ 5,910 into a calculator. I hope this helps :)
@CenturiVonKikie maybe take it down and re-upload it fixed! Also I would recommend waiting until around 9pm CET to post it. That’s when most people are usually active :)
Very cool and fun! Just to let you know, in order for someone to see a response to their comment, you have to click reply. I didn’t see your last one until now
@TowJade that’s really odd. If you want I’d be happy to reduce the drag points for you and post it unlisted. If you’re busy with other builds though that’s also no problem :)
This isn’t actually a bug. It’s about where the elevators are in relation to the CoM of your aircraft. I’m guessing this is either happening on a delta aircraft or on elevators added to the main wing. If you move the elevators to the outside of the wing it should help but that depends on where that is in relation to the CoM. The “Test flight” section at the very bottom should help
Damn this is really beautiful! This is a really cool and sadly unknown plane but you really did it justice! I used it to base one of my mig-21 style builds off of. You did a superb job on this build!
Pretty cool gun! The lower receiver seems a little big but otherwise looks pretty cool! You could remove the flash from the shell ejector too and make the firing time between barrel cannon and ejector cannon shorter. That would make it even better!
Been playing around with this more and I think this is the first build I've seen where I can reliably and easily get air to air kills with the cannon. I must say again that this is such a fun build to use
Cool! This is really well made. I love the little hatch but it would be cool if there was a way that you could shoot to the side with the rear machine guns without accidentally shooting the other off
This is really good for one of your first builds! If you were to add more detail to it (insignias, outlining panels and control surfaces, pitot tube, etc) it would be even better! I can’t wait to see what else you come up with
@DickBrazen hey buddy! How’ve you been? How has corona changed your life?
@123Acepilot I did watch the main battle scene though. Quite a funny bunch of aircraft
@123Acepilot I completely forgot! I was trying to think of a film to watch today but couldn’t find anything on Netflix. Thanks for reminding me! I will check it out now
@Frenchman sorry man I have no idea. I never tried to make one and don’t think I will ever feel the need to hahaha
@Aviator007 this is pretty neat!
@Rtoons no problem!
@Tarquez no problem buddy! You’re a very talented builder!
@nadvgia fair enough. Also no need to tag him here. Others have tagged him before haha
@nadvgia why not take a look at how other people made theirs. You seem fairly experienced so maybe give that a go
@Tarquez getting something to fly exactly the way you want is an often annoying but very rewarding job. You made it fly very well!
Pretty nice! The plane is quite a bit too heavy and has way too much fuel to the point where it’s too underpowered. However, if you remove 80% of the fuel it will still have a very capable range and have enough power. The cockpit also seems rather small for such a large aircraft and a bit too close to the engine. Apart from that though, it’s very fun to fly and looks good!
@riko ohhh I see. Neat!
This is very cool! Great looking aircraft/spacecraft and very enjoyable to fly around in
@riko but without locking on right? It never tells me that it’s locked on before Or after I fire. Is that maybe just a glitch for me?
@riko but they don’t track or lock on to the ships? How do they do that? Also I’ll check out the other missiles
You guys did magnificent work on this aircraft. Pretty much everything about it is perfect. The engine is of the highest quality and shape of the plane is great. What a wonderful build!
@shipster that is true
Very very cool! A very plausible aircraft
@Tex338 no problem buddy!
Very cool! This is a well made robot and is simple and fun to use
Love it! Great cockpit in there
@masotan15 maybe I misunderstood what you were asking. Can you explain one more time if my answer didn't make sense?
@masotan15 its just division. Use a calculator or google for it instead of doing it mentally. If you type 33,721/5,910 into google it will show you the answer. Otherwise you can put in 33,721 ÷ 5,910 into a calculator. I hope this helps :)
If I go to Australia and look at this post will it be the right way round?
Excellently done! One of the best J-10s I’ve seen here
@CenturiVonKikie great to hear!
@masotan15 5,910 fits into 33,721 around 5.71 times
@masotan15 do you mean 33,721/5,910? If yes it’s equal to roughly 5.71
Whoa! This is the only model 60 on SP. Time for another one!
@CenturiVonKikie maybe take it down and re-upload it fixed! Also I would recommend waiting until around 9pm CET to post it. That’s when most people are usually active :)
Very cool and fun! Just to let you know, in order for someone to see a response to their comment, you have to click reply. I didn’t see your last one until now
@TowJade that’s really odd. If you want I’d be happy to reduce the drag points for you and post it unlisted. If you’re busy with other builds though that’s also no problem :)
This isn’t actually a bug. It’s about where the elevators are in relation to the CoM of your aircraft. I’m guessing this is either happening on a delta aircraft or on elevators added to the main wing. If you move the elevators to the outside of the wing it should help but that depends on where that is in relation to the CoM. The “Test flight” section at the very bottom should help
Lovely! It fits perfectly with the bomber
@duanyu7373 great to hear! Once again, excellent job :)
@Bman01 if you need help with XML feel free to ask! Also .45acp is still a little too long to fit in that magazine
Damn this is really beautiful! This is a really cool and sadly unknown plane but you really did it justice! I used it to base one of my mig-21 style builds off of. You did a superb job on this build!
Pretty cool gun! The lower receiver seems a little big but otherwise looks pretty cool! You could remove the flash from the shell ejector too and make the firing time between barrel cannon and ejector cannon shorter. That would make it even better!
Been playing around with this more and I think this is the first build I've seen where I can reliably and easily get air to air kills with the cannon. I must say again that this is such a fun build to use
This is beautiful! Probably the best lightning on the site!
How’s it going on finishing it? Were you able to reduce the drag points?
@Tex338 if you need more help feel free to ask :)
What I would do is to get a diagram of the P-51 and then use the blueprint feature to get it the same size and shape
This is amazing! Great job with this one!
Beautifully made! Great smoke dispensers!
Really nice!
@Kaqiusha321 no problem!
Cool! This is really well made. I love the little hatch but it would be cool if there was a way that you could shoot to the side with the rear machine guns without accidentally shooting the other off
This is really good for one of your first builds! If you were to add more detail to it (insignias, outlining panels and control surfaces, pitot tube, etc) it would be even better! I can’t wait to see what else you come up with
@RiChieCheese no problem!