1,243 MrSev Comments

  • Riding Dirty 7.8 years ago

    @Typhlosion130 yeah... I tried looking into that and I can't tell if it's lift or downforce...

  • Bottom Feeder Racer 7.8 years ago

    @marcox43 a bigger what?

  • Riding Dirty 7.8 years ago

    @LiamW update, that helped a ton thanks! Still didn't make the finish ring but I gotthe best results so far

  • Riding Dirty 7.8 years ago

    @LiamW Allright.. Thanks

  • Riding Dirty 7.8 years ago

    @LiamW I recently just submitted it called it "bottom feeder"

  • Riding Dirty 7.8 years ago

    Yeah but I'm never fast enough to make it, so I make my vehicle go faster, then it flies and spins, so I weigh it down, then it's not fast enough. The cycle continues, instead I just focused on a different problem and now it at least doesn't spin out and loose all its speed on the ramp to jump

  • Riding Dirty 7.8 years ago

    @Typhlosion130 no, however the turn at 6 the AI just ignores. I'm talking the jump to the finish line. Especially for an individual like me with very limited knowledge of min maxing vehicles in this game and most others

  • Riding Dirty 7.8 years ago

    How in the heck do I make the jump to finish?! Every time something spins me and I loose all speed!

  • Shark Tooth 8.0 years ago

    You shoulda made it a double contest, make the plane that was gonna be printed and win the race , that'd make things a bit more interesting I think

  • Yeti Scramble RE-DO! 8.0 years ago

    Well, I don't have the map, but I'm sending in my best plane.

  • The mobile beta should be out now 8.1 years ago

    What if you didn't get an Email?

  • I CANT DOWNLOAD THE NEW UPDATE 8.1 years ago

    Thanks @Dimetrodonscantfly

  • I CANT DOWNLOAD THE NEW UPDATE 8.1 years ago

    It's not on IOS yet, it needs to go through the IOS security stuff

  • Export designs out of Unity for 3D Printing? 8.1 years ago

    OMG it could be an award for 1st place in one, some, or all of the tournaments! A 3D print of your winning plane!

  • Export designs out of Unity for 3D Printing? 8.1 years ago

    So.. How's the progress on making this a thing?

  • Suggestion: More realistic crashes, explosions and damage! 8.1 years ago

    Also in general when a propeller engine breaks, the propeller should "die" first, not the whole engine part.

  • Flyweight - Oceanview Speedway 8.2 years ago

    I made a plane that flew the course flawlessly, but it's average time was 3:12

  • Typhoon Circuit 8.2 years ago

    @Delphinus ooohhh thanks!

  • Typhoon Circuit 8.2 years ago

    What exactly is mod class? And can I still mod on the iOS app?

  • Stealth Racer 8.3 years ago

    Wells or at least if my plane looses round 1 to you I won't be upset.

  • Daredevil Racer-Lightspark 8.3 years ago

    Cool

  • Polaris 2 8.3 years ago

    @SteadfastContracting sure

  • Polaris 2 8.3 years ago

    @SteadfastContracting update, call it a wash, it turns faster but it over maeuvers sometimes , THX

  • BAD AI FLYING??? 8.3 years ago

    @Skua I've done that multiple times, and I've kep the same plane over multiple runs, and I swear instead of learning it gets dumber

  • Polaris 2 8.3 years ago

    @SteadfastContracting I'll try that, thanks!

  • Polaris 2 8.3 years ago

    @SteadfastContracting how might you want me to go about faster pitch... I know making the control surface bigger but then it just goes into a flat spin normally

  • Daredevil 8.3 years ago

    @SteadfastContracting https://www.simpleplanes.com/a/L8NEmj/Polaris-2

  • BAD AI FLYING??? 8.3 years ago

    @Skua I'm gonna call BS on the learning AI because I had a plane never crashed in a race running on AI, and now its gotten worse at flying. Is there any way to reset what it learned?

  • Daredevil 8.3 years ago

    My main problem is the ending bridge... Any help with that or just submit with a prayer?

  • Building help 8.3 years ago

    I have an aircraft that's good at maneuvering and I cannot replicate the maneuvering abilities it has.

  • Daredevil 8.3 years ago

    @Typhlosion130 I know right.. I was wondering if the "crash" disqualifier is what they say or what the game sais, because there have been a few times when I was going through the bridge, I hit something, then my cockpit makes it through and I win.

  • A-20 TwinHog UE 8.3 years ago

    @AnonymousUser99 ayyyyy thanks

  • Bandit Run 8.3 years ago

    I'm still kinda new, what is XML modding?

  • Push Plane Challenge!!! 8.4 years ago

    I'm in

  • Cormorant 8.4 years ago

    I love Galaxy on Fire 2

  • A Quick survey. 8.4 years ago

    @Puredeath
    I need to look into game mechanics and programming when I go to college..

  • A Quick survey. 8.4 years ago

    What is needed to make this work?

  • AVB-7C Versamillitude 8.5 years ago

    I made 2 alternates, only 1 meets all the criteria for the challenge ... Could I swap or something? @Rohan

  • A-20 TwinHog 8.5 years ago

    I just made my proper submission plane... But ok..@Rohan

  • [CLOSED] Bomber Challenge 8.5 years ago

    So download this and use the cockpit from it... Got it. THX @Rohan

  • [CLOSED] Bomber Challenge 8.5 years ago

    How do I let you know I'm in? Just here? Is there a tag? What?

  • SR-71 Blackbird 8.5 years ago

    What the heck is this angled block?! I'm still completely new and can hardly get things to sit right let alone TILT!

  • A Quick survey. 8.5 years ago

    Hello? Anyone here?

  • A Quick survey. 8.7 years ago

    I'm curious as to the size. Roughly how big would one of the given planes be? (Given being, say the vtol you get upon installing)