good job for your first plane. you can check out fuselage parts if you haven't done that yet. you can shape thos in any form you like so you can make even more awesome planes! :D
it doesn't want to take off, the rear gear are much lower than the front gear, causing the plane to stay at an angle, that angle increases during acceleration so it won't take off.
the aircraft looks good, only problem is that the force from the pitch can be too much sometimes, causing the plane to spin out of controll and crash. reducing the pitch controll service size can help or putting the center of lift further back from the center of mass.
nice plane, good manouverability (both as usuall) its something different compared to your last couple of planes, which I like. the green stripe on the nose makes it look like a bird's head lol.
I looked at your profile, noticing you just joined the SP gang, this is a good plane for a beginner. I do recommend when you add VTOL RCN's as well so you can stabilise your plane in VTOL mode, and some landing gear. The VTOL RCN's are of course connected to the VTOL engine.
@TMR9001 the rocket pod needs to be facing up in order to make it function properly, which means deactivating AG8, activating AG1 and sliding VTOL up (i didnt realise i said it wrong in the description) all the way.
the two rotors are supposted to rotate in opposite directions to counterbalance the turning effect caused by the rotors themselfs. the center of mass is suppost to be underneath the rotors for proper vertical takeoff. the gyroscopic stability was too high for such a lightweight helicopter and the pitch and roll ranges should be reduced for better flight performances. also due to the fact that you connected the turn of the vtol nozzles to the throttle you can't use full throttle or the rotors won't spin properly. if your plane had only 1 rotor a second rotor could be placed at the back to counterbalance the spin (the settings of that back rotor need to be as low as possible, but the throttle can be set to yaw if the rotation isn't too much (meaning the rotor isn't really needed)). else u can still experiment with ur creation but do keep in mind the things said above.
what i remember is that u need about 120 point for u to be able to upvote, if u get even more (i dont remember how much) you can spotlight vehicles, which means people who follow you on here will get a message saying that they should check out the vehicle you gave a spotlight.
@Kerbango rip plane then.
have an upvote! because you made a good working plane and so you can save up some points!
good job for your first plane. you can check out fuselage parts if you haven't done that yet. you can shape thos in any form you like so you can make even more awesome planes! :D
it doesn't want to take off, the rear gear are much lower than the front gear, causing the plane to stay at an angle, that angle increases during acceleration so it won't take off.
thnx for the advise @Takicraftcorporation, when i'll be making a new car, i'll check out other cars on here to see how others made theirs.
the aircraft looks good, only problem is that the force from the pitch can be too much sometimes, causing the plane to spin out of controll and crash. reducing the pitch controll service size can help or putting the center of lift further back from the center of mass.
thnx for your upvote @TakicraftCorporation
you do know it rolls on its own right?
@Fmilner true
@DerekSP its ok, its a fun creation u made, i would never come up with something like it
now you can definatly see its a civilian aircraft, nice work
@tsampoy ah i c, cool.
jesus what a flight this thing can make!!
np @tsampoy
did you know that this helicopter is even faster than the fastest real life helicopter made today?
nice design, very manouverable, looks like a toy plane lol
@Liquidfox it is, @tsampoy made it look like a farmer plane from GTA SA, I helped him make it fly, hopefully he's happy with the results.
i've never seen anything like this before, self propelled boat by pistons. your creativity is big, have my upvote
thnx for the upvote @JettStorm
lets play the game: upvote before u can use the vehicle due to beta!
@DOX LOL true, it looks like a plane which would be too tiny to sit in with comfort. Thnx for the upvote and spotlight by the way.
thnx for the upvote @hopotumon
fun to watch
nice plane, good manouverability (both as usuall) its something different compared to your last couple of planes, which I like. the green stripe on the nose makes it look like a bird's head lol.
@shadowmaker108 LMAO! thnx for the upvote as well, also thnx for yours @MrVaultech
thnx for the upvote @AMINIRIAF1396
It starts flying a bit sideways due to the fact you replaced the vertical stabilizer with a handcrafted one. It really affects the flight performance.
I looked at your profile, noticing you just joined the SP gang, this is a good plane for a beginner. I do recommend when you add VTOL RCN's as well so you can stabilise your plane in VTOL mode, and some landing gear. The VTOL RCN's are of course connected to the VTOL engine.
@TMR9001 np and ty
thnx for the upvote @Carsong1017
@TMR9001 the rocket pod needs to be facing up in order to make it function properly, which means deactivating AG8, activating AG1 and sliding VTOL up (i didnt realise i said it wrong in the description) all the way.
also thnx for the upvote @alexchub1
thnx for the spotlight @alexchub1
thnx for the upvote @Dzeta8
thnx for the upvotes @loopy200. if theres any other creations u have trouble with i can help u out.
thats ok @loopy200
np and sure
thnx for the upvote @slayeralpha. this creation is just a fixed version from the rightfull owner but thanks anyways lol.
https://www.simpleplanes.com/a/Lr15B4/Loopy200-creation-Fixed
the two rotors are supposted to rotate in opposite directions to counterbalance the turning effect caused by the rotors themselfs. the center of mass is suppost to be underneath the rotors for proper vertical takeoff. the gyroscopic stability was too high for such a lightweight helicopter and the pitch and roll ranges should be reduced for better flight performances. also due to the fact that you connected the turn of the vtol nozzles to the throttle you can't use full throttle or the rotors won't spin properly. if your plane had only 1 rotor a second rotor could be placed at the back to counterbalance the spin (the settings of that back rotor need to be as low as possible, but the throttle can be set to yaw if the rotation isn't too much (meaning the rotor isn't really needed)). else u can still experiment with ur creation but do keep in mind the things said above.
thnx for the spotlight @Toast
well ty @shamrock, thnx for the upvote as well
thnx for the very real upvote @Shamrock
np @shamrock
thnx for the upvotes @Ephwurd, @niggelas100 and @hopotumon
u get 15 points for every upvote so u need more people to upvote your planes or u need to put more planes online for me and others to upvote.
what i remember is that u need about 120 point for u to be able to upvote, if u get even more (i dont remember how much) you can spotlight vehicles, which means people who follow you on here will get a message saying that they should check out the vehicle you gave a spotlight.
thnx for the imaginary upvote XD @Shamrock, i will help u out. thnx again SteadfastContracting for your spotlight.
thnx for the upvote @SteadfastContracting
thnx for the spotlight and upvote @ColonelStriker :D