@SemedianIndustries three main things 1.)the side profile just seems... Off, especially the engine side. 2.) The parts constantly bump causing for choppy turns. 3.) (The biggest one) I can't get my airfoils to line up smoothly, if you look at the main wings they're kinda... Choppy and not aligned well
@BogdanX why dont you give it a shot. Not saying this in a spiteful way, Im just curious to see your take on getting those elusive curves by the intakes while keeping your typical part efficiency intact (around or below 500 parts)
Finally!!! Someone tilted the damn main rotor. Now if only the people building chinooks would do the same. You've earned this helicopter mechanics upvote
Pretty boring build, but I dont play as much as I used to (helicopters break alot :/...) but I figured this would be a fun one, basic as it is. Learned a few wierd quirks in how the game calculates drag from this one (look at that nose bud)
@ChiChiWerx never thought to do drag reduction in lieu of power scaling; and I think I'm going to exclusively only mirror by part and not the entire plane, it seems to cause alot of issues. Anyways, thankyou very much for the advice, I'm looking to make a starfighter next so, (and maybe a redo of this) with the aforementioned improvements and some livery. Let's see how it goes
@Hyattorama not entirely sure, a buddy uploaded it about 7 months ago and said use this on some builds. I'm not too keen on the simple planes community but I cant seem to find sarpanitus profile; preventing me from confirming or denying, all I know is neither of us built it. Should I remove this acft ?
@AerialFighterSnakes damn, I never noticed that. I'll see what I can do to fix it for the next build(I'm trying to expand this to 350ish parts) I'm tired of using stock landing gear and I need to do livery on my planes; I cant just keep putting it off
@BogdanX it's a longshot but I was wondering if you could give me advice to improve my design. This one, as it is, doesnt seem to be cutting it, along with a few of my other more recent designs. ty in advance
This no small pp, this Big PP
+1Macross series?
Interesting....
@Ergi , thankyou for the upvote
Side note, the gyro is located in front of the rotor pylon, so if you want the FASH to be stronger just increase it's stability and speed
Don't give up on it my man, I know you can build a better cockpit than that
@Potato21 about how much should I shrink them? Any ratios I could go off of (5x the height of the cockpit, etc)
@SemedianIndustries three main things 1.)the side profile just seems... Off, especially the engine side. 2.) The parts constantly bump causing for choppy turns. 3.) (The biggest one) I can't get my airfoils to line up smoothly, if you look at the main wings they're kinda... Choppy and not aligned well
@BogdanX why dont you give it a shot. Not saying this in a spiteful way, Im just curious to see your take on getting those elusive curves by the intakes while keeping your typical part efficiency intact (around or below 500 parts)
Finally!!! Someone tilted the damn main rotor. Now if only the people building chinooks would do the same. You've earned this helicopter mechanics upvote
+1I remember playing red alert 2 against brutal ai, 1v7 on arctic circle... they would spam the living hell out of these
+3@Noname918181 ikr, I found out some wierd quirks i didnt know before making this
Pretty boring build, but I dont play as much as I used to (helicopters break alot :/...) but I figured this would be a fun one, basic as it is. Learned a few wierd quirks in how the game calculates drag from this one (look at that nose bud)
@ChiChiWerx never thought to do drag reduction in lieu of power scaling; and I think I'm going to exclusively only mirror by part and not the entire plane, it seems to cause alot of issues. Anyways, thankyou very much for the advice, I'm looking to make a starfighter next so, (and maybe a redo of this) with the aforementioned improvements and some livery. Let's see how it goes
@ChiChiWerx whatever makes it easier for you to type it I suppose
@Sadboye12 @1423448204 @TheFantasticTyphoon @TheCreatorandDestroyer99
@Chancey21
@Anio Thankyou guys! The support is always appreciated, you're awesome :)
@ChiChiWerx heck yeah man, feedback is always appreciated. Also, do you fly military or civilian?
@Hyattorama done, and ty for the support too
+1@Hyattorama not entirely sure, a buddy uploaded it about 7 months ago and said use this on some builds. I'm not too keen on the simple planes community but I cant seem to find sarpanitus profile; preventing me from confirming or denying, all I know is neither of us built it. Should I remove this acft ?
+1@AerialFighterSnakes damn, I never noticed that. I'll see what I can do to fix it for the next build(I'm trying to expand this to 350ish parts) I'm tired of using stock landing gear and I need to do livery on my planes; I cant just keep putting it off
Damn dude I love it! I'll be sure to come back and upvote once my timer cools down
+1What happened to the old one
@Dastin thankyou
@grizzlitn thankyou!
@BlackhattAircraft ty for the support!
looks at parts count ...yep... you're certifiably insane... Great job though!
@JohnnyBoythePilot tyvm!
@IGNikolaev tyvm for the UV an SL
+1@YourWife ah, unfortunate
Why did you take down the other one? Already had 16 upvotes
@Mmdben it's all good man, any support is good support and it's always appreciated :)
@Simplemike ty for the SL :)
@TUNDERTEAM tyvm!!
+1Nice and clean design
@Armyguy1534 tyvm for the upvote and SL
@SakuraSaku tyvm!
@Mmdben ty for the continued support :)
+1@Aeromen Tyvm!
@Phoza thankyou for supporting my build :)
I love the landing gear, wish I could make them that well
@Topfighter lol, that movie had me calling that plane a mig till I was 12
@JamesBoA tyvm for the upvote
@USSR thankyou for the upvote my man
Nice, I like the cockpit!
@DemXu Thankyou for the support!
+1@BogdanX So is this any better compared to my last plane? What could I improve on next?
@BogdanX tyvm, so basically it's just attention to smaller detail
@BogdanX it's a longshot but I was wondering if you could give me advice to improve my design. This one, as it is, doesnt seem to be cutting it, along with a few of my other more recent designs. ty in advance
Nice
@plane918273645's